ata_piix: Add additional PCI identifier for 40 wire short cable

[linux-2.6-omap-h63xx.git] / drivers / ide / ide-tape.c

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4e59239fef75e1ecd7638d0dcf3f7fdc6e4a2b7b..7b9181b5469d3be9d3e8e0929c5a0c2d4122c8d5 100644 (file)
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -565,7 +565,7 @@ typedef struct os_dat_s {
  *     The following parameter is used to select the point in the internal
  *     tape fifo in which we will start to refill the buffer. Decreasing
  *     the following parameter will improve the system's latency and
- *     interactive response, while using a high value might improve sytem
+ *     interactive response, while using a high value might improve system
  *     throughput.
  */
 #define IDETAPE_FIFO_THRESHOLD                 2
@@ -621,7 +621,6 @@ typedef struct os_dat_s {
  */
 #define USE_IOTRACE    0
 #if USE_IOTRACE
-#include <linux/io_trace.h>
 #define IO_IDETAPE_FIFO        500
 #endif
 
@@ -640,7 +639,7 @@ typedef enum {
 } idetape_chrdev_direction_t;
 
 struct idetape_bh {
-       unsigned short b_size;
+       u32 b_size;
        atomic_t b_count;
        struct idetape_bh *b_reqnext;
        char *b_data;
@@ -4561,28 +4560,33 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive)
        printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size);
 #endif /* IDETAPE_DEBUG_INFO */
 }
+
+#ifdef CONFIG_IDE_PROC_FS
 static void idetape_add_settings (ide_drive_t *drive)
 {
        idetape_tape_t *tape = drive->driver_data;
 
 /*
- *                     drive   setting name    read/write      ioctl   ioctl           data type       min                     max                     mul_factor                      div_factor                      data pointer                            set function
+ *                     drive   setting name            read/write      data type       min                     max                     mul_factor                      div_factor      data pointer                            set function
  */
-       ide_add_setting(drive,  "buffer",       SETTING_READ,   -1,     -1,             TYPE_SHORT,     0,                      0xffff,                 1,                              2,                              &tape->capabilities.buffer_size,        NULL);
-       ide_add_setting(drive,  "pipeline_min", SETTING_RW,     -1,     -1,             TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,                              &tape->min_pipeline,                    NULL);
-       ide_add_setting(drive,  "pipeline",     SETTING_RW,     -1,     -1,             TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,                              &tape->max_stages,                      NULL);
-       ide_add_setting(drive,  "pipeline_max", SETTING_RW,     -1,     -1,             TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,                              &tape->max_pipeline,                    NULL);
-       ide_add_setting(drive,  "pipeline_used",SETTING_READ,   -1,     -1,             TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,                              &tape->nr_stages,                       NULL);
-       ide_add_setting(drive,  "pipeline_pending",SETTING_READ,-1,     -1,             TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,                              &tape->nr_pending_stages,               NULL);
-       ide_add_setting(drive,  "speed",        SETTING_READ,   -1,     -1,             TYPE_SHORT,     0,                      0xffff,                 1,                              1,                              &tape->capabilities.speed,              NULL);
-       ide_add_setting(drive,  "stage",        SETTING_READ,   -1,     -1,             TYPE_INT,       0,                      0xffff,                 1,                              1024,                           &tape->stage_size,                      NULL);
-       ide_add_setting(drive,  "tdsc",         SETTING_RW,     -1,     -1,             TYPE_INT,       IDETAPE_DSC_RW_MIN,     IDETAPE_DSC_RW_MAX,     1000,                           HZ,                             &tape->best_dsc_rw_frequency,           NULL);
-       ide_add_setting(drive,  "dsc_overlap",  SETTING_RW,     -1,     -1,             TYPE_BYTE,      0,                      1,                      1,                              1,                              &drive->dsc_overlap,                    NULL);
-       ide_add_setting(drive,  "pipeline_head_speed_c",SETTING_READ,   -1,     -1,     TYPE_INT,       0,                      0xffff,                 1,                              1,                              &tape->controlled_pipeline_head_speed,  NULL);
-       ide_add_setting(drive,  "pipeline_head_speed_u",SETTING_READ,   -1,     -1,     TYPE_INT,       0,                      0xffff,                 1,                              1,                              &tape->uncontrolled_pipeline_head_speed,        NULL);
-       ide_add_setting(drive,  "avg_speed",    SETTING_READ,   -1,     -1,             TYPE_INT,       0,                      0xffff,                 1,                              1,                              &tape->avg_speed,               NULL);
-       ide_add_setting(drive,  "debug_level",SETTING_RW,       -1,     -1,             TYPE_INT,       0,                      0xffff,                 1,                              1,                              &tape->debug_level,             NULL);
+       ide_add_setting(drive,  "buffer",               SETTING_READ,   TYPE_SHORT,     0,                      0xffff,                 1,                              2,              &tape->capabilities.buffer_size,        NULL);
+       ide_add_setting(drive,  "pipeline_min",         SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->min_pipeline,                    NULL);
+       ide_add_setting(drive,  "pipeline",             SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->max_stages,                      NULL);
+       ide_add_setting(drive,  "pipeline_max",         SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->max_pipeline,                    NULL);
+       ide_add_setting(drive,  "pipeline_used",        SETTING_READ,   TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->nr_stages,                       NULL);
+       ide_add_setting(drive,  "pipeline_pending",     SETTING_READ,   TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->nr_pending_stages,               NULL);
+       ide_add_setting(drive,  "speed",                SETTING_READ,   TYPE_SHORT,     0,                      0xffff,                 1,                              1,              &tape->capabilities.speed,              NULL);
+       ide_add_setting(drive,  "stage",                SETTING_READ,   TYPE_INT,       0,                      0xffff,                 1,                              1024,           &tape->stage_size,                      NULL);
+       ide_add_setting(drive,  "tdsc",                 SETTING_RW,     TYPE_INT,       IDETAPE_DSC_RW_MIN,     IDETAPE_DSC_RW_MAX,     1000,                           HZ,             &tape->best_dsc_rw_frequency,           NULL);
+       ide_add_setting(drive,  "dsc_overlap",          SETTING_RW,     TYPE_BYTE,      0,                      1,                      1,                              1,              &drive->dsc_overlap,                    NULL);
+       ide_add_setting(drive,  "pipeline_head_speed_c",SETTING_READ,   TYPE_INT,       0,                      0xffff,                 1,                              1,              &tape->controlled_pipeline_head_speed,  NULL);
+       ide_add_setting(drive,  "pipeline_head_speed_u",SETTING_READ,   TYPE_INT,       0,                      0xffff,                 1,                              1,              &tape->uncontrolled_pipeline_head_speed,NULL);
+       ide_add_setting(drive,  "avg_speed",            SETTING_READ,   TYPE_INT,       0,                      0xffff,                 1,                              1,              &tape->avg_speed,                       NULL);
+       ide_add_setting(drive,  "debug_level",          SETTING_RW,     TYPE_INT,       0,                      0xffff,                 1,                              1,              &tape->debug_level,                     NULL);
 }
+#else
+static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#endif
 
 /*
  *     ide_setup is called to:
@@ -4703,7 +4707,7 @@ static void ide_tape_remove(ide_drive_t *drive)
 {
        idetape_tape_t *tape = drive->driver_data;
 
-       ide_unregister_subdriver(drive, tape->driver);
+       ide_proc_unregister_driver(drive, tape->driver);
 
        ide_unregister_region(tape->disk);
 
@@ -4730,8 +4734,7 @@ static void ide_tape_release(struct kref *kref)
        kfree(tape);
 }
 
-#ifdef CONFIG_PROC_FS
-
+#ifdef CONFIG_IDE_PROC_FS
 static int proc_idetape_read_name
        (char *page, char **start, off_t off, int count, int *eof, void *data)
 {
@@ -4749,11 +4752,6 @@ static ide_proc_entry_t idetape_proc[] = {
        { "name",       S_IFREG|S_IRUGO,        proc_idetape_read_name, NULL },
        { NULL, 0, NULL, NULL }
 };
-
-#else
-
-#define        idetape_proc    NULL
-
 #endif
 
 static int ide_tape_probe(ide_drive_t *);
@@ -4773,7 +4771,9 @@ static ide_driver_t idetape_driver = {
        .end_request            = idetape_end_request,
        .error                  = __ide_error,
        .abort                  = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
        .proc                   = idetape_proc,
+#endif
 };
 
 /*
@@ -4864,7 +4864,7 @@ static int ide_tape_probe(ide_drive_t *drive)
 
        ide_init_disk(g, drive);
 
-       ide_register_subdriver(drive, &idetape_driver);
+       ide_proc_register_driver(drive, &idetape_driver);
 
        kref_init(&tape->kref);