slub: Add kmalloc_large_node() to support kmalloc_node fallback

[linux-2.6-omap-h63xx.git] / drivers / ide / pci / cmd640.c

diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index da3565e0071f417628d96fa806daa29c9876cd4a..ec667982809c18ae8ddf59bc5023190134cb33c1 100644 (file)
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/ide/pci/cmd640.c             Version 1.02  Sep 01, 1996
- *
  *  Copyright (C) 1995-1996  Linus Torvalds & authors (see below)
  */
 
@@ -105,10 +103,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -705,6 +699,18 @@ static int pci_conf2(void)
        return 0;
 }
 
+static const struct ide_port_info cmd640_port_info __initdata = {
+       .chipset                = ide_cmd640,
+       .host_flags             = IDE_HFLAG_SERIALIZE |
+                                 IDE_HFLAG_NO_DMA |
+                                 IDE_HFLAG_NO_AUTOTUNE |
+                                 IDE_HFLAG_ABUSE_PREFETCH |
+                                 IDE_HFLAG_ABUSE_FAST_DEVSEL,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+       .pio_mask               = ATA_PIO5,
+#endif
+};
+
 /*
  * Probe for a cmd640 chipset, and initialize it if found.
  */
@@ -762,11 +768,7 @@ static int __init cmd640x_init(void)
        setup_device_ptrs ();
        printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
               cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
-       cmd_hwif0->chipset = ide_cmd640;
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-       cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
-                               IDE_HFLAG_ABUSE_FAST_DEVSEL;
-       cmd_hwif0->pio_mask = ATA_PIO5;
        cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
@@ -785,7 +787,8 @@ static int __init cmd640x_init(void)
        /*
         * Try to enable the secondary interface, if not already enabled
         */
-       if (cmd_hwif1->noprobe) {
+       if (cmd_hwif1->noprobe ||
+           (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
                port2 = "not probed";
        } else {
                b = get_cmd640_reg(CNTRL);
@@ -817,23 +820,14 @@ static int __init cmd640x_init(void)
         * Initialize data for secondary cmd640 port, if enabled
         */
        if (second_port_cmd640) {
-               cmd_hwif0->serialized = 1;
-               cmd_hwif1->serialized = 1;
-               cmd_hwif1->chipset = ide_cmd640;
-               cmd_hwif0->mate = cmd_hwif1;
-               cmd_hwif1->mate = cmd_hwif0;
-               cmd_hwif1->channel = 1;
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-               cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
-                                       IDE_HFLAG_ABUSE_FAST_DEVSEL;
-               cmd_hwif1->pio_mask = ATA_PIO5;
                cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
                idx[1] = cmd_hwif1->index;
        }
        printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
-               cmd_hwif0->serialized ? "" : "not ", port2);
+                        second_port_cmd640 ? "" : "not ", port2);
 
        /*
         * Establish initial timings/prefetch for all drives.
@@ -878,7 +872,7 @@ static int __init cmd640x_init(void)
        cmd640_dump_regs();
 #endif
 
-       ide_device_add(idx);
+       ide_device_add(idx, &cmd640_port_info);
 
        return 1;
 }