Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6

[linux-2.6-omap-h63xx.git] / drivers / ide / pci / sl82c105.c

diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index f492318ba79724b0b702c9bb4fd794cc66aaf5f5..147d783f7529e681fb1d69645942d00780bd42e0 100644 (file)
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -75,7 +75,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 /*
  * Configure the chipset for PIO mode.
  */
-static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
+static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
        struct pci_dev *dev     = HWIF(drive)->pci_dev;
        int reg                 = 0x44 + drive->dn * 4;
@@ -105,9 +105,9 @@ static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
 }
 
 /*
- * Configure the drive and chipset for a new transfer speed.
+ * Configure the chipset for DMA mode.
  */
-static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
+static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
        static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
        u16 drv_ctrl;
@@ -140,23 +140,8 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
                }
                break;
        default:
-               return -1;
+               return;
        }
-
-       return ide_config_drive_speed(drive, speed);
-}
-
-/*
- * Check to see if the drive and chipset are capable of DMA mode.
- */
-static int sl82c105_ide_dma_check(ide_drive_t *drive)
-{
-       DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name));
-
-       if (ide_tune_dma(drive))
-               return 0;
-
-       return -1;
 }
 
 /*
@@ -306,17 +291,6 @@ static void sl82c105_resetproc(ide_drive_t *drive)
        pci_read_config_dword(dev, 0x40, &val);
        pci_set_drvdata(dev, (void *)val);
 }
-       
-/*
- * We only deal with PIO mode here - DMA mode 'using_dma' is not
- * initialised at the point that this function is called.
- */
-static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-       sl82c105_tune_pio(drive, pio);
-
-       (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
-}
 
 /*
  * Return the revision of the Winbond bridge
@@ -383,23 +357,10 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
        DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
 
        hwif->set_pio_mode      = &sl82c105_set_pio_mode;
-       hwif->speedproc         = &sl82c105_tune_chipset;
+       hwif->set_dma_mode      = &sl82c105_set_dma_mode;
        hwif->selectproc        = &sl82c105_selectproc;
        hwif->resetproc         = &sl82c105_resetproc;
 
-       /*
-        * We support 32-bit I/O on this interface, and
-        * it doesn't have problems with interrupts.
-        */
-       hwif->drives[0].io_32bit = hwif->drives[1].io_32bit = 1;
-       hwif->drives[0].unmask   = hwif->drives[1].unmask   = 1;
-
-       /*
-        * We always autotune PIO,  this is done before DMA is checked,
-        * so there's no risk of accidentally disabling DMA
-        */
-       hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
-
        if (!hwif->dma_base)
                return;
 
@@ -414,31 +375,27 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
                return;
        }
 
-       hwif->atapi_dma  = 1;
-       hwif->mwdma_mask = 0x07;
+       hwif->mwdma_mask = ATA_MWDMA2;
 
-       hwif->ide_dma_check             = &sl82c105_ide_dma_check;
        hwif->ide_dma_on                = &sl82c105_ide_dma_on;
        hwif->dma_off_quietly           = &sl82c105_dma_off_quietly;
        hwif->dma_lost_irq              = &sl82c105_dma_lost_irq;
        hwif->dma_start                 = &sl82c105_dma_start;
        hwif->dma_timeout               = &sl82c105_dma_timeout;
 
-       if (!noautodma)
-               hwif->autodma = 1;
-       hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-
        if (hwif->mate)
                hwif->serialized = hwif->mate->serialized = 1;
 }
 
-static ide_pci_device_t sl82c105_chipset __devinitdata = {
+static const struct ide_port_info sl82c105_chipset __devinitdata = {
        .name           = "W82C105",
        .init_chipset   = init_chipset_sl82c105,
        .init_hwif      = init_hwif_sl82c105,
-       .autodma        = NOAUTODMA,
        .enablebits     = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
-       .bootable       = ON_BOARD,
+       .host_flags     = IDE_HFLAG_IO_32BIT |
+                         IDE_HFLAG_UNMASK_IRQS |
+                         IDE_HFLAG_NO_AUTODMA |
+                         IDE_HFLAG_BOOTABLE,
        .pio_mask       = ATA_PIO5,
 };
 
@@ -447,8 +404,8 @@ static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_dev
        return ide_setup_pci_device(dev, &sl82c105_chipset);
 }
 
-static struct pci_device_id sl82c105_pci_tbl[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0},
+static const struct pci_device_id sl82c105_pci_tbl[] = {
+       { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0 },
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);