]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/ieee1394/ohci1394.c
Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6-omap-h63xx.git] / drivers / ieee1394 / ohci1394.c
index 628130a58af3fe9205750bdf4b68eb225815fbaa..5dadfd296f79c4796e414e3de301a3c4f9714569 100644 (file)
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
@@ -181,7 +180,7 @@ static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
 static void ohci1394_pci_remove(struct pci_dev *pdev);
 
 #ifndef __LITTLE_ENDIAN
-const static size_t hdr_sizes[] = {
+static const size_t hdr_sizes[] = {
        3,      /* TCODE_WRITEQ */
        4,      /* TCODE_WRITEB */
        3,      /* TCODE_WRITE_RESPONSE */
@@ -508,9 +507,8 @@ static void ohci_initialize(struct ti_ohci *ohci)
        /* Set up self-id dma buffer */
        reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus);
 
-       /* enable self-id and phys */
-       reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID |
-                 OHCI1394_LinkControl_RcvPhyPkt);
+       /* enable self-id */
+       reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID);
 
        /* Set the Config ROM mapping register */
        reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus);
@@ -519,9 +517,6 @@ static void ohci_initialize(struct ti_ohci *ohci)
        ohci->max_packet_size =
                1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1);
                
-       /* Don't accept phy packets into AR request context */
-       reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400);
-
        /* Clear the interrupt mask */
        reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
@@ -618,7 +613,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 #endif
 
                PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, "
-                      "attempting to setting max_packet_size to 512 bytes");
+                      "attempting to set max_packet_size to 512 bytes");
                reg_write(ohci, OHCI1394_BusOptions,
                          (reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002);
                ohci->max_packet_size = 512;
@@ -2378,6 +2373,7 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id)
        if (event & OHCI1394_postedWriteErr) {
                PRINT(KERN_ERR, "physical posted write error");
                /* no recovery strategy yet, had to involve protocol drivers */
+               event &= ~OHCI1394_postedWriteErr;
        }
        if (event & OHCI1394_cycleTooLong) {
                if(printk_ratelimit())
@@ -3281,14 +3277,11 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
                PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!",
                      (unsigned long long)pci_resource_len(dev, 0));
 
-       /* Seems PCMCIA handles this internally. Not sure why. Seems
-        * pretty bogus to force a driver to special case this.  */
-#ifndef PCMCIA
-       if (!request_mem_region (ohci_base, OHCI1394_REGISTER_SIZE, OHCI1394_DRIVER_NAME))
+       if (!request_mem_region(ohci_base, OHCI1394_REGISTER_SIZE,
+                               OHCI1394_DRIVER_NAME))
                FAIL(-ENOMEM, "MMIO resource (0x%llx - 0x%llx) unavailable",
                        (unsigned long long)ohci_base,
                        (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE);
-#endif
        ohci->init_state = OHCI_INIT_HAVE_MEM_REGION;
 
        ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE);
@@ -3509,10 +3502,8 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
                iounmap(ohci->registers);
 
        case OHCI_INIT_HAVE_MEM_REGION:
-#ifndef PCMCIA
                release_mem_region(pci_resource_start(ohci->dev, 0),
                                   OHCI1394_REGISTER_SIZE);
-#endif
 
 #ifdef CONFIG_PPC_PMAC
        /* On UniNorth, power down the cable and turn off the chip clock
@@ -3541,9 +3532,6 @@ static int ohci1394_pci_suspend(struct pci_dev *pdev, pm_message_t state)
        int err;
        struct ti_ohci *ohci = pci_get_drvdata(pdev);
 
-       printk(KERN_INFO "%s does not fully support suspend and resume yet\n",
-              OHCI1394_DRIVER_NAME);
-
        if (!ohci) {
                printk(KERN_ERR "%s: tried to suspend nonexisting host\n",
                       OHCI1394_DRIVER_NAME);
@@ -3630,15 +3618,14 @@ static int ohci1394_pci_resume(struct pci_dev *pdev)
        mdelay(50);
        ohci_initialize(ohci);
 
+       hpsb_resume_host(ohci->host);
        return 0;
 }
 #endif /* CONFIG_PM */
 
-#define PCI_CLASS_FIREWIRE_OHCI     ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10)
-
 static struct pci_device_id ohci1394_pci_tbl[] = {
        {
-               .class =        PCI_CLASS_FIREWIRE_OHCI,
+               .class =        PCI_CLASS_SERIAL_FIREWIRE_OHCI,
                .class_mask =   PCI_ANY_ID,
                .vendor =       PCI_ANY_ID,
                .device =       PCI_ANY_ID,
@@ -3668,6 +3655,7 @@ static struct pci_driver ohci1394_pci_driver = {
 /* essentially the only purpose of this code is to allow another
    module to hook into ohci's interrupt handler */
 
+/* returns zero if successful, one if DMA context is locked up */
 int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg)
 {
        int i=0;