/*
* ati_remote2 - ATI/Philips USB RF remote driver
*
- * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
- * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
+ * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
+ * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
#include <linux/usb/input.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
-#define DRIVER_VERSION "0.2"
+#define DRIVER_VERSION "0.3"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
* A remote's "channel" may be altered by pressing and holding the "PC" button for
* approximately 3 seconds, after which the button will slowly flash the count of the
* currently configured "channel", using the numeric keypad enter a number between 1 and
- * 16 and then the "PC" button again, the button will slowly flash the count of the
+ * 16 and then press the "PC" button again, the button will slowly flash the count of the
* newly configured "channel".
*/
};
MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
-static struct {
- int hw_code;
- int key_code;
+static DEFINE_MUTEX(ati_remote2_mutex);
+
+enum {
+ ATI_REMOTE2_OPENED = 0x1,
+ ATI_REMOTE2_SUSPENDED = 0x2,
+};
+
+enum {
+ ATI_REMOTE2_AUX1,
+ ATI_REMOTE2_AUX2,
+ ATI_REMOTE2_AUX3,
+ ATI_REMOTE2_AUX4,
+ ATI_REMOTE2_PC,
+ ATI_REMOTE2_MODES,
+};
+
+static const struct {
+ u8 hw_code;
+ u16 keycode;
} ati_remote2_key_table[] = {
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
{ 0x37, KEY_RECORD },
{ 0x38, KEY_DVD },
{ 0x39, KEY_TV },
+ { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
{ 0x54, KEY_MENU },
{ 0x58, KEY_UP },
{ 0x59, KEY_DOWN },
{ 0xa9, BTN_LEFT },
{ 0xaa, BTN_RIGHT },
{ 0xbe, KEY_QUESTION },
- { 0xd5, KEY_FRONT },
{ 0xd0, KEY_EDIT },
+ { 0xd5, KEY_FRONT },
{ 0xf9, KEY_INFO },
- { (0x00 << 8) | 0x3f, KEY_PROG1 },
- { (0x01 << 8) | 0x3f, KEY_PROG2 },
- { (0x02 << 8) | 0x3f, KEY_PROG3 },
- { (0x03 << 8) | 0x3f, KEY_PROG4 },
- { (0x04 << 8) | 0x3f, KEY_PC },
- { 0, KEY_RESERVED }
};
struct ati_remote2 {
char name[64];
char phys[64];
+
+ /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
+ u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
+
+ unsigned int flags;
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote2_disconnect(struct usb_interface *interface);
+static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
+static int ati_remote2_resume(struct usb_interface *interface);
static struct usb_driver ati_remote2_driver = {
.name = "ati_remote2",
.probe = ati_remote2_probe,
.disconnect = ati_remote2_disconnect,
.id_table = ati_remote2_id_table,
+ .suspend = ati_remote2_suspend,
+ .resume = ati_remote2_resume,
+ .supports_autosuspend = 1,
};
-static int ati_remote2_open(struct input_dev *idev)
+static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
{
- struct ati_remote2 *ar2 = input_get_drvdata(idev);
int r;
r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
if (r) {
dev_err(&ar2->intf[0]->dev,
- "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
if (r) {
usb_kill_urb(ar2->urb[0]);
dev_err(&ar2->intf[1]->dev,
- "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
return 0;
}
+static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
+{
+ usb_kill_urb(ar2->urb[1]);
+ usb_kill_urb(ar2->urb[0]);
+}
+
+static int ati_remote2_open(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int r;
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ r = usb_autopm_get_interface(ar2->intf[0]);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ goto fail1;
+ }
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
+ r = ati_remote2_submit_urbs(ar2);
+ if (r)
+ goto fail2;
+ }
+
+ ar2->flags |= ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ usb_autopm_put_interface(ar2->intf[0]);
+
+ return 0;
+
+ fail2:
+ mutex_unlock(&ati_remote2_mutex);
+ usb_autopm_put_interface(ar2->intf[0]);
+ fail1:
+ return r;
+}
+
static void ati_remote2_close(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
- usb_kill_urb(ar2->urb[0]);
- usb_kill_urb(ar2->urb[1]);
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags &= ~ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
}
static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
mode = data[0] & 0x0F;
- if (mode > 4) {
+ if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
{
int i;
- for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
if (ati_remote2_key_table[i].hw_code == hw_code)
return i;
mode = data[0] & 0x0F;
- if (mode > 4) {
+ if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
}
hw_code = data[2];
- /*
- * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
- * Use the mode byte to figure out which one was pressed.
- */
if (hw_code == 0x3f) {
/*
* For some incomprehensible reason the mouse pad generates
if (data[1] == 0)
ar2->mode = mode;
-
- hw_code |= mode << 8;
}
if (!((1 << mode) & mode_mask))
case 2: /* repeat */
/* No repeat for mouse buttons. */
- if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
- ati_remote2_key_table[index].key_code == BTN_RIGHT)
+ if (ar2->keycode[mode][index] == BTN_LEFT ||
+ ar2->keycode[mode][index] == BTN_RIGHT)
return;
if (!time_after_eq(jiffies, ar2->jiffies))
return;
}
- input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
+ input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
input_sync(idev);
}
switch (urb->status) {
case 0:
+ usb_mark_last_busy(ar2->udev);
ati_remote2_input_mouse(ar2);
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[0]->dev,
- "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ "%s(): urb status = %d\n", __func__, urb->status);
return;
default:
+ usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[0]->dev,
- "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ "%s(): urb status = %d\n", __func__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[0]->dev,
- "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
}
static void ati_remote2_complete_key(struct urb *urb)
switch (urb->status) {
case 0:
+ usb_mark_last_busy(ar2->udev);
ati_remote2_input_key(ar2);
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&ar2->intf[1]->dev,
- "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ "%s(): urb status = %d\n", __func__, urb->status);
return;
default:
+ usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[1]->dev,
- "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ "%s(): urb status = %d\n", __func__, urb->status);
}
r = usb_submit_urb(urb, GFP_ATOMIC);
if (r)
dev_err(&ar2->intf[1]->dev,
- "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
+}
+
+static int ati_remote2_getkeycode(struct input_dev *idev,
+ int scancode, int *keycode)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int index, mode;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ return -EINVAL;
+
+ index = ati_remote2_lookup(scancode & 0xFF);
+ if (index < 0)
+ return -EINVAL;
+
+ *keycode = ar2->keycode[mode][index];
+ return 0;
+}
+
+static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int index, mode, old_keycode;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ return -EINVAL;
+
+ index = ati_remote2_lookup(scancode & 0xFF);
+ if (index < 0)
+ return -EINVAL;
+
+ if (keycode < KEY_RESERVED || keycode > KEY_MAX)
+ return -EINVAL;
+
+ old_keycode = ar2->keycode[mode][index];
+ ar2->keycode[mode][index] = keycode;
+ set_bit(keycode, idev->keybit);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ if (ar2->keycode[mode][index] == old_keycode)
+ return 0;
+ }
+ }
+
+ clear_bit(old_keycode, idev->keybit);
+
+ return 0;
}
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
- int i, retval;
+ int index, mode, retval;
idev = input_allocate_device();
if (!idev)
idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
- set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
+ set_bit(ar2->keycode[mode][index], idev->keybit);
+ }
+ }
+
+ /* AUX1-AUX4 and PC generate the same scancode. */
+ index = ati_remote2_lookup(0x3f);
+ ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
+ ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
+ ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
+ ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
+ ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
+ set_bit(KEY_PROG1, idev->keybit);
+ set_bit(KEY_PROG2, idev->keybit);
+ set_bit(KEY_PROG3, idev->keybit);
+ set_bit(KEY_PROG4, idev->keybit);
+ set_bit(KEY_PC, idev->keybit);
idev->rep[REP_DELAY] = 250;
idev->rep[REP_PERIOD] = 33;
idev->open = ati_remote2_open;
idev->close = ati_remote2_close;
+ idev->getkeycode = ati_remote2_getkeycode;
+ idev->setkeycode = ati_remote2_setkeycode;
+
idev->name = ar2->name;
idev->phys = ar2->phys;
channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (r) {
dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
- __FUNCTION__, r);
+ __func__, r);
return r;
}
usb_set_intfdata(interface, ar2);
+ interface->needs_remote_wakeup = 1;
+
return 0;
fail2:
kfree(ar2);
}
+static int ati_remote2_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags |= ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return 0;
+}
+
+static int ati_remote2_resume(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ if (!r)
+ ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
static int __init ati_remote2_init(void)
{
int r;
projects / linux-2.6-omap-h63xx.git / blobdiff