#define INPORT_REG_MODE 0x07
#define INPORT_RESET 0x80
-#ifdef CONFIG_INPUT_ATIXL
+#ifdef CONFIG_MOUSE_ATIXL
#define INPORT_NAME "ATI XL Mouse"
#define INPORT_VENDOR 0x0002
#define INPORT_SPEED_30HZ 0x01
module_param_named(irq, inport_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
-__obsolete_setup("inport_irq=");
-
static struct input_dev *inport_dev;
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t inport_interrupt(int irq, void *dev_id)
{
unsigned char buttons;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
- input_regs(inport_dev, regs);
-
outb(INPORT_REG_X, INPORT_CONTROL_PORT);
input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT));
static int __init inport_init(void)
{
unsigned char a, b, c;
+ int err;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (a == b || a != c) {
- release_region(INPORT_BASE, INPORT_EXTENT);
- printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
- return -ENODEV;
+ printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+ err = -ENODEV;
+ goto err_release_region;
}
- if (!(inport_dev = input_allocate_device())) {
+ inport_dev = input_allocate_device();
+ if (!inport_dev) {
printk(KERN_ERR "inport.c: Not enough memory for input device\n");
- release_region(INPORT_BASE, INPORT_EXTENT);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_release_region;
}
inport_dev->name = INPORT_NAME;
inport_dev->id.product = 0x0001;
inport_dev->id.version = 0x0100;
- inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ inport_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ inport_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ inport_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
inport_dev->open = inport_open;
inport_dev->close = inport_close;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
- input_register_device(inport_dev);
+ err = input_register_device(inport_dev);
+ if (err)
+ goto err_free_dev;
return 0;
+
+ err_free_dev:
+ input_free_device(inport_dev);
+ err_release_region:
+ release_region(INPORT_BASE, INPORT_EXTENT);
+
+ return err;
}
static void __exit inport_exit(void)