/*
* Version Information
*/
-#define DRIVER_VERSION "v1.5 (May-15-2004)"
-#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio"
+#define DRIVER_VERSION "v2.3 (May 2, 2007)"
+#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen"
#define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
/*
* (returned as Report 3 - absolute coordinates from the mouse)
*
* bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
- * byte0 0 0 0 0 0 0 1 0
+ * byte0 0 0 0 0 0 0 1 1
* byte1 X7 X6 X5 X4 X3 X2 X1 X0
* byte2 X15 X14 X13 X12 X11 X10 X9 X8
* byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* (returned as Report 5 - macrokeys from the mouse)
*
* bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
- * byte0 0 0 0 0 0 1 0 0
+ * byte0 0 0 0 0 0 1 0 1
* byte1 0 0 0 BS2 BS Tip IR DV
* byte2 0 0 0 0 0 0 1 0
* byte3 0 0 0 K4 K3 K2 K1 K0
#define AIPTEK_WHEEL_DISABLE (-10101)
/* ToolCode values, which BTW are 0x140 .. 0x14f
- * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
- * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
- *
- * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
- * get reset.
+ * We have things set up such that if the tool button has changed,
+ * the tools get reset.
*/
-#define TOOL_BUTTON(x) ((x) & 0x14f)
-#define TOOL_BUTTON_FIRED(x) ((x) & 0x200)
-#define TOOL_BUTTON_FIRED_BIT 0x200
/* toolMode codes
*/
#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
/* Mouse button programming
*/
-#define AIPTEK_MOUSE_LEFT_BUTTON 0x01
-#define AIPTEK_MOUSE_RIGHT_BUTTON 0x02
-#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04
+#define AIPTEK_MOUSE_LEFT_BUTTON 0x04
+#define AIPTEK_MOUSE_RIGHT_BUTTON 0x08
+#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10
/* Stylus button programming
*/
int modelCode; /* Tablet model code (not unique) */
int firmwareCode; /* prom/eeprom version */
char usbPath[64 + 1]; /* device's physical usb path */
- char inputPath[64 + 1]; /* input device path */
};
struct aiptek_settings {
int inDelay; /* jitter: in jitter delay? */
unsigned long endDelay; /* jitter: time when delay ends */
int previousJitterable; /* jitterable prev value */
+
+ int lastMacro; /* macro key to reset */
+ int previousToolMode; /* pen, pencil, brush, etc. tool */
unsigned char *data; /* incoming packet data */
};
+static const int eventTypes[] = {
+ EV_KEY, EV_ABS, EV_REL, EV_MSC,
+};
+
+static const int absEvents[] = {
+ ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
+ ABS_WHEEL, ABS_MISC,
+};
+
+static const int relEvents[] = {
+ REL_X, REL_Y, REL_WHEEL,
+};
+
+static const int buttonEvents[] = {
+ BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
+ BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+ BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
+ BTN_STYLUS, BTN_STYLUS2,
+};
+
/*
* Permit easy lookup of keyboard events to send, versus
* the bitmap which comes from the tablet. This hides the
};
/***********************************************************************
- * Relative reports deliver values in 2's complement format to
- * deal with negative offsets.
+ * Map values to strings and back. Every map shoudl have the following
+ * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
*/
-static int aiptek_convert_from_2s_complement(unsigned char c)
+#define AIPTEK_INVALID_VALUE -1
+
+struct aiptek_map {
+ const char *string;
+ int value;
+};
+
+static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
{
- int ret;
- unsigned char b = c;
- int negate = 0;
+ const struct aiptek_map *p;
- if ((b & 0x80) != 0) {
- b = ~b;
- b--;
- negate = 1;
- }
- ret = b;
- ret = (negate == 1) ? -ret : ret;
- return ret;
+ if (str[count - 1] == '\n')
+ count--;
+
+ for (p = map; p->string; p++)
+ if (!strncmp(str, p->string, count))
+ return p->value;
+
+ return AIPTEK_INVALID_VALUE;
+}
+
+static const char *map_val_to_str(const struct aiptek_map *map, int val)
+{
+ const struct aiptek_map *p;
+
+ for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
+ if (val == p->value)
+ return p->string;
+
+ return "unknown";
}
/***********************************************************************
* Proximity. Why two events? I thought it interesting to know if the
* Proximity event occurred while the tablet was in absolute or relative
* mode.
+ * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
+ * get an event transmitted each time. ABS_MISC works better, since it
+ * can be set and re-set. Thus, only using ABS_MISC from now on.
*
* Other tablets use the notion of a certain minimum stylus pressure
* to infer proximity. While that could have been done, that is yet
aiptek->diagnostic =
AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
} else {
- x = aiptek_convert_from_2s_complement(data[2]);
- y = aiptek_convert_from_2s_complement(data[3]);
+ x = (signed char) data[2];
+ y = (signed char) data[3];
/* jitterable keeps track of whether any button has been pressed.
* We're also using it to remap the physical mouse button mask
* that a non-zero value indicates that one or more
* mouse button was pressed.)
*/
- jitterable = data[5] & 0x07;
+ jitterable = data[1] & 0x07;
- left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
- right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
- middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+ left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
+ right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
+ middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
input_report_key(inputdev, BTN_LEFT, left);
input_report_key(inputdev, BTN_MIDDLE, middle);
input_report_key(inputdev, BTN_RIGHT, right);
+
+ input_report_abs(inputdev, ABS_MISC,
+ 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
input_report_rel(inputdev, REL_X, x);
input_report_rel(inputdev, REL_Y, y);
- input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
/* Wheel support is in the form of a single-event
* firing.
aiptek->curSetting.wheel);
aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
}
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
input_sync(inputdev);
}
}
y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
z = le16_to_cpu(get_unaligned((__le16 *) (data + 6)));
- p = (data[5] & 0x01) != 0 ? 1 : 0;
- dv = (data[5] & 0x02) != 0 ? 1 : 0;
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
tip = (data[5] & 0x04) != 0 ? 1 : 0;
/* Use jitterable to re-arrange button masks
* all 'bad' reports...
*/
if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED
- (aiptek->curSetting.toolMode) == 0) {
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.toolMode),
+ aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
}
}
input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
input_sync(inputdev);
}
}
jitterable = data[5] & 0x1c;
- p = (data[5] & 0x01) != 0 ? 1 : 0;
- dv = (data[5] & 0x02) != 0 ? 1 : 0;
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED
- (aiptek->curSetting.toolMode) == 0) {
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.toolMode),
+ aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
}
}
- input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+ input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
input_sync(inputdev);
}
}
else if (data[0] == 4) {
jitterable = data[1] & 0x18;
- p = (data[1] & 0x01) != 0 ? 1 : 0;
- dv = (data[1] & 0x02) != 0 ? 1 : 0;
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
tip = (data[1] & 0x04) != 0 ? 1 : 0;
bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
- macro = data[3];
+ macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
- if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.toolMode),
+ aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
+ }
- if (p != 0) {
- input_report_key(inputdev, BTN_TOUCH, tip);
- input_report_key(inputdev, BTN_STYLUS, bs);
- input_report_key(inputdev, BTN_STYLUS2, pck);
- input_report_abs(inputdev, ABS_PRESSURE, z);
- }
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
- /* For safety, we're sending key 'break' codes for the
- * neighboring macro keys.
- */
- if (macro > 0) {
- input_report_key(inputdev,
- macroKeyEvents[macro - 1], 0);
- }
- if (macro < 25) {
- input_report_key(inputdev,
- macroKeyEvents[macro + 1], 0);
- }
- input_report_key(inputdev, macroKeyEvents[macro], p);
- input_report_abs(inputdev, ABS_MISC,
- p | AIPTEK_REPORT_TOOL_STYLUS);
- input_sync(inputdev);
+ if (macro != -1 && macro != aiptek->lastMacro) {
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ aiptek->lastMacro = macro;
}
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_STYLUS);
+ input_sync(inputdev);
}
/* Report 5s come from the macro keys when pressed by mouse
*/
else if (data[0] == 5) {
jitterable = data[1] & 0x1c;
- p = (data[1] & 0x01) != 0 ? 1 : 0;
- dv = (data[1] & 0x02) != 0 ? 1 : 0;
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
- macro = data[3];
+ macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
- if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
- input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.toolMode),
- 1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
- }
-
- if (p != 0) {
- input_report_key(inputdev, BTN_LEFT, left);
- input_report_key(inputdev, BTN_MIDDLE, middle);
- input_report_key(inputdev, BTN_RIGHT, right);
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode, 1);
+ aiptek->previousToolMode = aiptek->curSetting.toolMode;
}
+ }
- /* For safety, we're sending key 'break' codes for the
- * neighboring macro keys.
- */
- if (macro > 0) {
- input_report_key(inputdev,
- macroKeyEvents[macro - 1], 0);
- }
- if (macro < 25) {
- input_report_key(inputdev,
- macroKeyEvents[macro + 1], 0);
- }
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ if (macro != -1 && macro != aiptek->lastMacro) {
input_report_key(inputdev, macroKeyEvents[macro], 1);
- input_report_rel(inputdev, ABS_MISC,
- p | AIPTEK_REPORT_TOOL_MOUSE);
- input_sync(inputdev);
+ aiptek->lastMacro = macro;
}
+
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_MOUSE);
+ input_sync(inputdev);
}
/* We have no idea which tool can generate a report 6. Theoretically,
* neither need to, having been given reports 4 & 5 for such use.
0);
}
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
- */
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.
- toolMode), 1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
input_report_key(inputdev, macroKeyEvents[macro], 1);
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
aiptek->inputdev->absmax[ABS_X] + 1,
aiptek->inputdev->absmax[ABS_Y] + 1);
*/
static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
-/***********************************************************************
- * support routines for the 'product_id' file
- */
-static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct aiptek *aiptek = dev_get_drvdata(dev);
-
- if (aiptek == NULL)
- return 0;
-
- return snprintf(buf, PAGE_SIZE, "0x%04x\n",
- aiptek->inputdev->id.product);
-}
-
-static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor_id' file
- */
-static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct aiptek *aiptek = dev_get_drvdata(dev);
-
- if (aiptek == NULL)
- return 0;
-
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
-}
-
-static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor' file
- */
-static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct aiptek *aiptek = dev_get_drvdata(dev);
- int retval;
-
- if (aiptek == NULL)
- return 0;
-
- retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer);
- return retval;
-}
-
-static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL);
-
-/***********************************************************************
- * support routines for the 'product' file
- */
-static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct aiptek *aiptek = dev_get_drvdata(dev);
- int retval;
-
- if (aiptek == NULL)
- return 0;
-
- retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product);
- return retval;
-}
-
-static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL);
-
/***********************************************************************
* support routines for the 'pointer_mode' file. Note that this file
* both displays current setting and allows reprogramming.
*/
+static struct aiptek_map pointer_mode_map[] = {
+ { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE },
+ { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE },
+ { "either", AIPTEK_POINTER_EITHER_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.pointerMode) {
- case AIPTEK_POINTER_ONLY_STYLUS_MODE:
- s = "stylus";
- break;
-
- case AIPTEK_POINTER_ONLY_MOUSE_MODE:
- s = "mouse";
- break;
-
- case AIPTEK_POINTER_EITHER_MODE:
- s = "either";
- break;
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(pointer_mode_map,
+ aiptek->curSetting.pointerMode));
}
static ssize_t
store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
+ int new_mode = map_str_to_val(pointer_mode_map, buf, count);
- if (strcmp(buf, "stylus") == 0) {
- aiptek->newSetting.pointerMode =
- AIPTEK_POINTER_ONLY_STYLUS_MODE;
- } else if (strcmp(buf, "mouse") == 0) {
- aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE;
- } else if (strcmp(buf, "either") == 0) {
- aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
- }
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.pointerMode = new_mode;
return count;
}
* support routines for the 'coordinate_mode' file. Note that this file
* both displays current setting and allows reprogramming.
*/
+
+static struct aiptek_map coordinate_mode_map[] = {
+ { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE },
+ { "relative", AIPTEK_COORDINATE_RELATIVE_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.coordinateMode) {
- case AIPTEK_COORDINATE_ABSOLUTE_MODE:
- s = "absolute";
- break;
-
- case AIPTEK_COORDINATE_RELATIVE_MODE:
- s = "relative";
- break;
-
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(coordinate_mode_map,
+ aiptek->curSetting.coordinateMode));
}
static ssize_t
store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
+ int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
- if (strcmp(buf, "absolute") == 0) {
- aiptek->newSetting.pointerMode =
- AIPTEK_COORDINATE_ABSOLUTE_MODE;
- } else if (strcmp(buf, "relative") == 0) {
- aiptek->newSetting.pointerMode =
- AIPTEK_COORDINATE_RELATIVE_MODE;
- }
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.coordinateMode = new_mode;
return count;
}
* support routines for the 'tool_mode' file. Note that this file
* both displays current setting and allows reprogramming.
*/
+
+static struct aiptek_map tool_mode_map[] = {
+ { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE },
+ { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE },
+ { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE },
+ { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE },
+ { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE },
+ { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
+ { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) {
- case AIPTEK_TOOL_BUTTON_MOUSE_MODE:
- s = "mouse";
- break;
-
- case AIPTEK_TOOL_BUTTON_ERASER_MODE:
- s = "eraser";
- break;
-
- case AIPTEK_TOOL_BUTTON_PENCIL_MODE:
- s = "pencil";
- break;
-
- case AIPTEK_TOOL_BUTTON_PEN_MODE:
- s = "pen";
- break;
-
- case AIPTEK_TOOL_BUTTON_BRUSH_MODE:
- s = "brush";
- break;
-
- case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE:
- s = "airbrush";
- break;
-
- case AIPTEK_TOOL_BUTTON_LENS_MODE:
- s = "lens";
- break;
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(tool_mode_map,
+ aiptek->curSetting.toolMode));
}
static ssize_t
store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
+ int new_mode = map_str_to_val(tool_mode_map, buf, count);
- if (strcmp(buf, "mouse") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE;
- } else if (strcmp(buf, "eraser") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE;
- } else if (strcmp(buf, "pencil") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE;
- } else if (strcmp(buf, "pen") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
- } else if (strcmp(buf, "brush") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE;
- } else if (strcmp(buf, "airbrush") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE;
- } else if (strcmp(buf, "lens") == 0) {
- aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE;
- }
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+ aiptek->newSetting.toolMode = new_mode;
return count;
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
return snprintf(buf, PAGE_SIZE, "disable\n");
} else {
struct aiptek *aiptek = dev_get_drvdata(dev);
int x;
- if (aiptek == NULL)
- return 0;
-
if (strcmp(buf, "disable") == 0) {
aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
} else {
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
return snprintf(buf, PAGE_SIZE, "disable\n");
} else {
struct aiptek *aiptek = dev_get_drvdata(dev);
int y;
- if (aiptek == NULL)
- return 0;
-
if (strcmp(buf, "disable") == 0) {
aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
} else {
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10);
return count;
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "%d\n",
aiptek->curSetting.programmableDelay);
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10);
return count;
}
S_IRUGO | S_IWUGO,
show_tabletProgrammableDelay, store_tabletProgrammableDelay);
-/***********************************************************************
- * support routines for the 'input_path' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct aiptek *aiptek = dev_get_drvdata(dev);
-
- if (aiptek == NULL)
- return 0;
-
- return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n",
- aiptek->features.inputPath);
-}
-
-static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL);
-
/***********************************************************************
* support routines for the 'event_count' file. Note that this file
* only displays current setting.
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
}
struct aiptek *aiptek = dev_get_drvdata(dev);
char *retMsg;
- if (aiptek == NULL)
- return 0;
-
switch (aiptek->diagnostic) {
case AIPTEK_DIAGNOSTIC_NA:
retMsg = "no errors\n";
* support routines for the 'stylus_upper' file. Note that this file
* both displays current setting and allows for setting changing.
*/
+
+static struct aiptek_map stylus_button_map[] = {
+ { "upper", AIPTEK_STYLUS_UPPER_BUTTON },
+ { "lower", AIPTEK_STYLUS_LOWER_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.stylusButtonUpper) {
- case AIPTEK_STYLUS_UPPER_BUTTON:
- s = "upper";
- break;
-
- case AIPTEK_STYLUS_LOWER_BUTTON:
- s = "lower";
- break;
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonUpper));
}
static ssize_t
store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
- if (aiptek == NULL)
- return 0;
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
- if (strcmp(buf, "upper") == 0) {
- aiptek->newSetting.stylusButtonUpper =
- AIPTEK_STYLUS_UPPER_BUTTON;
- } else if (strcmp(buf, "lower") == 0) {
- aiptek->newSetting.stylusButtonUpper =
- AIPTEK_STYLUS_LOWER_BUTTON;
- }
+ aiptek->newSetting.stylusButtonUpper = new_button;
return count;
}
* support routines for the 'stylus_lower' file. Note that this file
* both displays current setting and allows for setting changing.
*/
+
static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.stylusButtonLower) {
- case AIPTEK_STYLUS_UPPER_BUTTON:
- s = "upper";
- break;
-
- case AIPTEK_STYLUS_LOWER_BUTTON:
- s = "lower";
- break;
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonLower));
}
static ssize_t
store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
- if (aiptek == NULL)
- return 0;
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
- if (strcmp(buf, "upper") == 0) {
- aiptek->newSetting.stylusButtonLower =
- AIPTEK_STYLUS_UPPER_BUTTON;
- } else if (strcmp(buf, "lower") == 0) {
- aiptek->newSetting.stylusButtonLower =
- AIPTEK_STYLUS_LOWER_BUTTON;
- }
+ aiptek->newSetting.stylusButtonLower = new_button;
return count;
}
* support routines for the 'mouse_left' file. Note that this file
* both displays current setting and allows for setting changing.
*/
+
+static struct aiptek_map mouse_button_map[] = {
+ { "left", AIPTEK_MOUSE_LEFT_BUTTON },
+ { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON },
+ { "right", AIPTEK_MOUSE_RIGHT_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.mouseButtonLeft) {
- case AIPTEK_MOUSE_LEFT_BUTTON:
- s = "left";
- break;
-
- case AIPTEK_MOUSE_MIDDLE_BUTTON:
- s = "middle";
- break;
-
- case AIPTEK_MOUSE_RIGHT_BUTTON:
- s = "right";
- break;
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonLeft));
}
static ssize_t
store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
- if (aiptek == NULL)
- return 0;
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
- if (strcmp(buf, "left") == 0) {
- aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
- } else if (strcmp(buf, "middle") == 0) {
- aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON;
- } else if (strcmp(buf, "right") == 0) {
- aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON;
- }
+ aiptek->newSetting.mouseButtonLeft = new_button;
return count;
}
static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.mouseButtonMiddle) {
- case AIPTEK_MOUSE_LEFT_BUTTON:
- s = "left";
- break;
-
- case AIPTEK_MOUSE_MIDDLE_BUTTON:
- s = "middle";
- break;
-
- case AIPTEK_MOUSE_RIGHT_BUTTON:
- s = "right";
- break;
-
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonMiddle));
}
static ssize_t
store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
- if (aiptek == NULL)
- return 0;
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
- if (strcmp(buf, "left") == 0) {
- aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON;
- } else if (strcmp(buf, "middle") == 0) {
- aiptek->newSetting.mouseButtonMiddle =
- AIPTEK_MOUSE_MIDDLE_BUTTON;
- } else if (strcmp(buf, "right") == 0) {
- aiptek->newSetting.mouseButtonMiddle =
- AIPTEK_MOUSE_RIGHT_BUTTON;
- }
+ aiptek->newSetting.mouseButtonMiddle = new_button;
return count;
}
static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- char *s;
-
- if (aiptek == NULL)
- return 0;
-
- switch (aiptek->curSetting.mouseButtonRight) {
- case AIPTEK_MOUSE_LEFT_BUTTON:
- s = "left";
- break;
-
- case AIPTEK_MOUSE_MIDDLE_BUTTON:
- s = "middle";
- break;
- case AIPTEK_MOUSE_RIGHT_BUTTON:
- s = "right";
- break;
-
- default:
- s = "unknown";
- break;
- }
- return snprintf(buf, PAGE_SIZE, "%s\n", s);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonRight));
}
static ssize_t
store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
- if (aiptek == NULL)
- return 0;
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
- if (strcmp(buf, "left") == 0) {
- aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON;
- } else if (strcmp(buf, "middle") == 0) {
- aiptek->newSetting.mouseButtonRight =
- AIPTEK_MOUSE_MIDDLE_BUTTON;
- } else if (strcmp(buf, "right") == 0) {
- aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
- }
+ aiptek->newSetting.mouseButtonRight = new_button;
return count;
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
return snprintf(buf, PAGE_SIZE, "disable\n");
} else {
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10);
return count;
}
*/
static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct aiptek *aiptek = dev_get_drvdata(dev);
-
- if (aiptek == NULL)
- return 0;
-
/* There is nothing useful to display, so a one-line manual
* is in order...
*/
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
/* We do not care what you write to this file. Merely the action
* of writing to this file triggers a tablet reprogramming.
*/
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
}
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- if (aiptek == NULL)
- return 0;
-
return snprintf(buf, PAGE_SIZE, "%04x\n",
aiptek->features.firmwareCode);
}
static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
-/***********************************************************************
- * This routine removes all existing sysfs files managed by this device
- * driver.
- */
-static void aiptek_delete_files(struct device *dev)
-{
- device_remove_file(dev, &dev_attr_size);
- device_remove_file(dev, &dev_attr_product_id);
- device_remove_file(dev, &dev_attr_vendor_id);
- device_remove_file(dev, &dev_attr_vendor);
- device_remove_file(dev, &dev_attr_product);
- device_remove_file(dev, &dev_attr_pointer_mode);
- device_remove_file(dev, &dev_attr_coordinate_mode);
- device_remove_file(dev, &dev_attr_tool_mode);
- device_remove_file(dev, &dev_attr_xtilt);
- device_remove_file(dev, &dev_attr_ytilt);
- device_remove_file(dev, &dev_attr_jitter);
- device_remove_file(dev, &dev_attr_delay);
- device_remove_file(dev, &dev_attr_input_path);
- device_remove_file(dev, &dev_attr_event_count);
- device_remove_file(dev, &dev_attr_diagnostic);
- device_remove_file(dev, &dev_attr_odm_code);
- device_remove_file(dev, &dev_attr_model_code);
- device_remove_file(dev, &dev_attr_firmware_code);
- device_remove_file(dev, &dev_attr_stylus_lower);
- device_remove_file(dev, &dev_attr_stylus_upper);
- device_remove_file(dev, &dev_attr_mouse_left);
- device_remove_file(dev, &dev_attr_mouse_middle);
- device_remove_file(dev, &dev_attr_mouse_right);
- device_remove_file(dev, &dev_attr_wheel);
- device_remove_file(dev, &dev_attr_execute);
-}
-
-/***********************************************************************
- * This routine creates the sysfs files managed by this device
- * driver.
- */
-static int aiptek_add_files(struct device *dev)
-{
- int ret;
+static struct attribute *aiptek_attributes[] = {
+ &dev_attr_size.attr,
+ &dev_attr_pointer_mode.attr,
+ &dev_attr_coordinate_mode.attr,
+ &dev_attr_tool_mode.attr,
+ &dev_attr_xtilt.attr,
+ &dev_attr_ytilt.attr,
+ &dev_attr_jitter.attr,
+ &dev_attr_delay.attr,
+ &dev_attr_event_count.attr,
+ &dev_attr_diagnostic.attr,
+ &dev_attr_odm_code.attr,
+ &dev_attr_model_code.attr,
+ &dev_attr_firmware_code.attr,
+ &dev_attr_stylus_lower.attr,
+ &dev_attr_stylus_upper.attr,
+ &dev_attr_mouse_left.attr,
+ &dev_attr_mouse_middle.attr,
+ &dev_attr_mouse_right.attr,
+ &dev_attr_wheel.attr,
+ &dev_attr_execute.attr,
+ NULL
+};
- if ((ret = device_create_file(dev, &dev_attr_size)) ||
- (ret = device_create_file(dev, &dev_attr_product_id)) ||
- (ret = device_create_file(dev, &dev_attr_vendor_id)) ||
- (ret = device_create_file(dev, &dev_attr_vendor)) ||
- (ret = device_create_file(dev, &dev_attr_product)) ||
- (ret = device_create_file(dev, &dev_attr_pointer_mode)) ||
- (ret = device_create_file(dev, &dev_attr_coordinate_mode)) ||
- (ret = device_create_file(dev, &dev_attr_tool_mode)) ||
- (ret = device_create_file(dev, &dev_attr_xtilt)) ||
- (ret = device_create_file(dev, &dev_attr_ytilt)) ||
- (ret = device_create_file(dev, &dev_attr_jitter)) ||
- (ret = device_create_file(dev, &dev_attr_delay)) ||
- (ret = device_create_file(dev, &dev_attr_input_path)) ||
- (ret = device_create_file(dev, &dev_attr_event_count)) ||
- (ret = device_create_file(dev, &dev_attr_diagnostic)) ||
- (ret = device_create_file(dev, &dev_attr_odm_code)) ||
- (ret = device_create_file(dev, &dev_attr_model_code)) ||
- (ret = device_create_file(dev, &dev_attr_firmware_code)) ||
- (ret = device_create_file(dev, &dev_attr_stylus_lower)) ||
- (ret = device_create_file(dev, &dev_attr_stylus_upper)) ||
- (ret = device_create_file(dev, &dev_attr_mouse_left)) ||
- (ret = device_create_file(dev, &dev_attr_mouse_middle)) ||
- (ret = device_create_file(dev, &dev_attr_mouse_right)) ||
- (ret = device_create_file(dev, &dev_attr_wheel)) ||
- (ret = device_create_file(dev, &dev_attr_execute))) {
- err("aiptek: killing own sysfs device files\n");
- aiptek_delete_files(dev);
- }
- return ret;
-}
+static struct attribute_group aiptek_attribute_group = {
+ .attrs = aiptek_attributes,
+};
/***********************************************************************
* This routine is called when a tablet has been identified. It basically
struct usb_endpoint_descriptor *endpoint;
struct aiptek *aiptek;
struct input_dev *inputdev;
- struct input_handle *inputhandle;
- struct list_head *node, *next;
int i;
int speeds[] = { 0,
AIPTEK_PROGRAMMABLE_DELAY_50,
aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
inputdev = input_allocate_device();
- if (!aiptek || !inputdev)
+ if (!aiptek || !inputdev) {
+ warn("aiptek: cannot allocate memory or input device");
goto fail1;
+ }
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
GFP_ATOMIC, &aiptek->data_dma);
- if (!aiptek->data)
+ if (!aiptek->data) {
+ warn("aiptek: cannot allocate usb buffer");
goto fail1;
+ }
aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!aiptek->urb)
+ if (!aiptek->urb) {
+ warn("aiptek: cannot allocate urb");
goto fail2;
+ }
aiptek->inputdev = inputdev;
aiptek->usbdev = usbdev;
aiptek->inDelay = 0;
aiptek->endDelay = 0;
aiptek->previousJitterable = 0;
+ aiptek->lastMacro = -1;
/* Set up the curSettings struct. Said struct contains the current
* programmable parameters. The newSetting struct contains changes
/* Now program the capacities of the tablet, in terms of being
* an input device.
*/
- inputdev->evbit[0] |= BIT(EV_KEY)
- | BIT(EV_ABS)
- | BIT(EV_REL)
- | BIT(EV_MSC);
-
- inputdev->absbit[0] |= BIT(ABS_MISC);
+ for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
+ __set_bit(eventTypes[i], inputdev->evbit);
- inputdev->relbit[0] |=
- (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
+ for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
+ __set_bit(absEvents[i], inputdev->absbit);
- inputdev->keybit[LONG(BTN_LEFT)] |=
- (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
+ for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
+ __set_bit(relEvents[i], inputdev->relbit);
- inputdev->keybit[LONG(BTN_DIGI)] |=
- (BIT(BTN_TOOL_PEN) |
- BIT(BTN_TOOL_RUBBER) |
- BIT(BTN_TOOL_PENCIL) |
- BIT(BTN_TOOL_AIRBRUSH) |
- BIT(BTN_TOOL_BRUSH) |
- BIT(BTN_TOOL_MOUSE) |
- BIT(BTN_TOOL_LENS) |
- BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
+ __set_bit(MSC_SERIAL, inputdev->mscbit);
- inputdev->mscbit[0] = BIT(MSC_SERIAL);
+ /* Set up key and button codes */
+ for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
+ __set_bit(buttonEvents[i], inputdev->keybit);
- /* Programming the tablet macro keys needs to be done with a for loop
- * as the keycodes are discontiguous.
- */
for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
- set_bit(macroKeyEvents[i], inputdev->keybit);
+ __set_bit(macroKeyEvents[i], inputdev->keybit);
/*
* Program the input device coordinate capacities. We do not yet
}
}
- /* Register the tablet as an Input Device
- */
- err = input_register_device(aiptek->inputdev);
- if (err)
+ /* Murphy says that some day someone will have a tablet that fails the
+ above test. That's you, Frederic Rodrigo */
+ if (i == ARRAY_SIZE(speeds)) {
+ info("input: Aiptek tried all speeds, no sane response");
goto fail2;
-
- /* We now will look for the evdev device which is mapped to
- * the tablet. The partial name is kept in the link list of
- * input_handles associated with this input device.
- * What identifies an evdev input_handler is that it begins
- * with 'event', continues with a digit, and that in turn
- * is mapped to input/eventN.
- */
- list_for_each_safe(node, next, &inputdev->h_list) {
- inputhandle = to_handle(node);
- if (strncmp(inputhandle->name, "event", 5) == 0) {
- strcpy(aiptek->features.inputPath, inputhandle->name);
- break;
- }
}
/* Associate this driver's struct with the usb interface.
/* Set up the sysfs files
*/
- aiptek_add_files(&intf->dev);
+ err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group);
+ if (err) {
+ warn("aiptek: cannot create sysfs group err: %d", err);
+ goto fail3;
+ }
- /* Make sure the evdev module is loaded. Assuming evdev IS a module :-)
+ /* Register the tablet as an Input Device
*/
- if (request_module("evdev") != 0)
- info("aiptek: error loading 'evdev' module");
-
+ err = input_register_device(aiptek->inputdev);
+ if (err) {
+ warn("aiptek: input_register_device returned err: %d", err);
+ goto fail4;
+ }
return 0;
+ fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ fail3: usb_free_urb(aiptek->urb);
fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
aiptek->data_dma);
- fail1: input_free_device(inputdev);
+ fail1: usb_set_intfdata(intf, NULL);
+ input_free_device(inputdev);
kfree(aiptek);
return err;
}
*/
usb_kill_urb(aiptek->urb);
input_unregister_device(aiptek->inputdev);
- aiptek_delete_files(&intf->dev);
+ sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
usb_free_urb(aiptek->urb);
usb_buffer_free(interface_to_usbdev(intf),
AIPTEK_PACKET_LENGTH,
projects / linux-2.6-omap-h63xx.git / blobdiff