Input: wm97xx - enable sub-drivers by default

[linux-2.6-omap-h63xx.git] / drivers / input / touchscreen / Kconfig

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e3e0baa1a158b4e907a5cb5e2f3aedc4654722e3..25287e80e236727f70bffef85bc0a6d782c44543 100644 (file)
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -103,6 +103,18 @@ config TOUCHSCREEN_MTOUCH
          To compile this driver as a module, choose M here: the
          module will be called mtouch.
 
+config TOUCHSCREEN_INEXIO
+       tristate "iNexio serial touchscreens"
+       select SERIO
+       help
+         Say Y here if you have an iNexio serial touchscreen connected to
+         your system.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called inexio.
+
 config TOUCHSCREEN_MK712
        tristate "ICS MicroClock MK712 touchscreen"
        help
@@ -115,19 +127,17 @@ config TOUCHSCREEN_MK712
          module will be called mk712.
 
 config TOUCHSCREEN_HP600
-       tristate "HP Jornada 680/690 touchscreen"
+       tristate "HP Jornada 6xx touchscreen"
        depends on SH_HP6XX && SH_ADC
        help
-         Say Y here if you have a HP Jornada 680 or 690 and want to
+         Say Y here if you have a HP Jornada 620/660/680/690 and want to
           support the built-in touchscreen.
 
-         If unsure, say N.
-
          To compile this driver as a module, choose M here: the
          module will be called hp680_ts_input.
 
 config TOUCHSCREEN_HP7XX
-       tristate "HP Jornada 710/720/728 touchscreen"
+       tristate "HP Jornada 7xx touchscreen"
        depends on SA1100_JORNADA720_SSP
        help
          Say Y here if you have a HP Jornada 710/720/728 and want
@@ -136,6 +146,18 @@ config TOUCHSCREEN_HP7XX
          To compile this driver as a module, choose M here: the
          module will be called jornada720_ts.
 
+config TOUCHSCREEN_HTCPEN
+       tristate "HTC Shift X9500 touchscreen"
+       depends on ISA
+       help
+         Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+         Clio / Shangrila and want to support the built-in touchscreen.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called htcpen.
+
 config TOUCHSCREEN_PENMOUNT
        tristate "Penmount serial touchscreen"
        select SERIO
@@ -148,6 +170,17 @@ config TOUCHSCREEN_PENMOUNT
          To compile this driver as a module, choose M here: the
          module will be called penmount.
 
+config TOUCHSCREEN_MIGOR
+       tristate "Renesas MIGO-R touchscreen"
+       depends on SH_MIGOR && I2C
+       help
+         Say Y here to enable MIGO-R touchscreen support.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called migor_ts.
+
 config TOUCHSCREEN_TOUCHRIGHT
        tristate "Touchright serial touchscreen"
        select SERIO
@@ -172,6 +205,18 @@ config TOUCHSCREEN_TOUCHWIN
          To compile this driver as a module, choose M here: the
          module will be called touchwin.
 
+config TOUCHSCREEN_ATMEL_TSADCC
+       tristate "Atmel Touchscreen Interface"
+       depends on ARCH_AT91SAM9RL
+       help
+         Say Y here if you have a 4-wire touchscreen connected to the
+          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called atmel_tsadcc.
+
 config TOUCHSCREEN_UCB1400
        tristate "Philips UCB1400 touchscreen"
        select AC97_BUS
@@ -187,6 +232,56 @@ config TOUCHSCREEN_UCB1400
          To compile this driver as a module, choose M here: the
          module will be called ucb1400_ts.
 
+config TOUCHSCREEN_WM97XX
+       tristate "Support for WM97xx AC97 touchscreen controllers"
+       depends on AC97_BUS
+       help
+         Say Y here if you have a Wolfson Microelectronics WM97xx
+         touchscreen connected to your system. Note that this option
+         only enables core driver, you will also need to select
+         support for appropriate chip below.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called wm97xx-ts.
+
+config TOUCHSCREEN_WM9705
+       bool "WM9705 Touchscreen interface support"
+       depends on TOUCHSCREEN_WM97XX
+       default y
+       help
+         Say Y here to enable support for the Wolfson Microelectronics
+         WM9705 touchscreen controller.
+
+config TOUCHSCREEN_WM9712
+       bool "WM9712 Touchscreen interface support"
+       depends on TOUCHSCREEN_WM97XX
+       default y
+       help
+         Say Y here to enable support for the Wolfson Microelectronics
+         WM9712 touchscreen controller.
+
+config TOUCHSCREEN_WM9713
+       bool "WM9713 Touchscreen interface support"
+       depends on TOUCHSCREEN_WM97XX
+       default y
+       help
+         Say Y here to enable support for the Wolfson Microelectronics
+         WM9713 touchscreen controller.
+
+config TOUCHSCREEN_WM97XX_MAINSTONE
+       tristate "WM97xx Mainstone accelerated touch"
+       depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+       help
+         Say Y here for support for streaming mode with WM97xx touchscreens
+         on Mainstone systems.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called mainstone-wm97xx.
+
 config TOUCHSCREEN_USB_COMPOSITE
        tristate "USB Touchscreen Driver"
        depends on USB_ARCH_HAS_HCD
@@ -202,6 +297,7 @@ config TOUCHSCREEN_USB_COMPOSITE
          - DMC TSC-10/25
          - IRTOUCHSYSTEMS/UNITOP
          - IdealTEK URTC1000
+         - GoTop Super_Q2/GogoPen/PenPower tablets
 
          Have a look at <http://linux.chapter7.ch/touchkit/> for
          a usage description and the required user-space stuff.
@@ -259,4 +355,20 @@ config TOUCHSCREEN_USB_GENERAL_TOUCH
        bool "GeneralTouch Touchscreen device support" if EMBEDDED
        depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_GOTOP
+       default y
+       bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
+       depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_TOUCHIT213
+       tristate "Sahara TouchIT-213 touchscreen"
+       select SERIO
+       help
+         Say Y here if you have a Sahara TouchIT-213 Tablet PC.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called touchit213.
+
 endif