*
* So how does the kernel know it's a Guest? The Guest starts at a special
* entry point marked with a magic string, which sets up a few things then
- * calls here. We replace the native functions in "struct paravirt_ops"
+ * calls here. We replace the native functions various "paravirt" structures
* with our Guest versions, then boot like normal. :*/
/*
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
* are reasonably expensive, batching them up makes sense. For example, a
* large mmap might update dozens of page table entries: that code calls
- * lguest_lazy_mode(PARAVIRT_LAZY_MMU), does the dozen updates, then calls
- * lguest_lazy_mode(PARAVIRT_LAZY_NONE).
+ * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
+ * lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hypercall() to store the call for
* future processing. When lazy mode is turned off we issue a hypercall to
* flush the stored calls.
- *
- * There's also a hack where "mode" is set to "PARAVIRT_LAZY_FLUSH" which
- * indicates we're to flush any outstanding calls immediately. This is used
- * when an interrupt handler does a kmap_atomic(): the page table changes must
- * happen immediately even if we're in the middle of a batch. Usually we're
- * not, though, so there's nothing to do. */
-static enum paravirt_lazy_mode lazy_mode; /* Note: not SMP-safe! */
-static void lguest_lazy_mode(enum paravirt_lazy_mode mode)
+ */
+static void lguest_leave_lazy_mode(void)
{
- if (mode == PARAVIRT_LAZY_FLUSH) {
- if (unlikely(lazy_mode != PARAVIRT_LAZY_NONE))
- hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
- } else {
- lazy_mode = mode;
- if (mode == PARAVIRT_LAZY_NONE)
- hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
- }
+ paravirt_leave_lazy(paravirt_get_lazy_mode());
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
}
static void lazy_hcall(unsigned long call,
unsigned long arg2,
unsigned long arg3)
{
- if (lazy_mode == PARAVIRT_LAZY_NONE)
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
hcall(call, arg1, arg2, arg3);
else
async_hcall(call, arg1, arg2, arg3);
}
/*G:038 That's enough excitement for now, back to ploughing through each of
- * the paravirt_ops (we're about 1/3 of the way through).
+ * the different pv_ops structures (we're about 1/3 of the way through).
*
* This is the Local Descriptor Table, another weird Intel thingy. Linux only
* uses this for some strange applications like Wine. We don't do anything
lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
}
-/* Unfortunately for Lguest, the paravirt_ops for page tables were based on
+/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
* a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
clocksource_register(&lguest_clock);
/* Now we've set up our clock, we can use it as the scheduler clock */
- paravirt_ops.sched_clock = lguest_sched_clock;
+ pv_time_ops.sched_clock = lguest_sched_clock;
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
/* The Linux bootloader header contains an "e820" memory map: the
* Launcher populated the first entry with our memory limit. */
- add_memory_region(E820_MAP->addr, E820_MAP->size, E820_MAP->type);
+ add_memory_region(boot_params.e820_map[0].addr,
+ boot_params.e820_map[0].size,
+ boot_params.e820_map[0].type);
/* This string is for the boot messages. */
return "LGUEST";
/*G:050
* Patching (Powerfully Placating Performance Pedants)
*
- * We have already seen that "struct paravirt_ops" lets us replace simple
+ * We have already seen that pv_ops structures let us replace simple
* native instructions with calls to the appropriate back end all throughout
* the kernel. This allows the same kernel to run as a Guest and as a native
* kernel, but it's slow because of all the indirect branches.
{
const char *start, *end;
} lguest_insns[] = {
- [PARAVIRT_PATCH(irq_disable)] = { lgstart_cli, lgend_cli },
- [PARAVIRT_PATCH(irq_enable)] = { lgstart_sti, lgend_sti },
- [PARAVIRT_PATCH(restore_fl)] = { lgstart_popf, lgend_popf },
- [PARAVIRT_PATCH(save_fl)] = { lgstart_pushf, lgend_pushf },
+ [PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
+ [PARAVIRT_PATCH(pv_irq_ops.irq_enable)] = { lgstart_sti, lgend_sti },
+ [PARAVIRT_PATCH(pv_irq_ops.restore_fl)] = { lgstart_popf, lgend_popf },
+ [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
};
/* Now our patch routine is fairly simple (based on the native one in
return insn_len;
}
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The paravirt_ops
- * structure in the kernel provides a single point for (almost) every routine
- * we have to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest. The pv_ops
+ * structures in the kernel provide points for (almost) every routine we have
+ * to override to avoid privileged instructions. */
__init void lguest_init(void *boot)
{
/* Copy boot parameters first: the Launcher put the physical location
/* We're under lguest, paravirt is enabled, and we're running at
* privilege level 1, not 0 as normal. */
- paravirt_ops.name = "lguest";
- paravirt_ops.paravirt_enabled = 1;
- paravirt_ops.kernel_rpl = 1;
+ pv_info.name = "lguest";
+ pv_info.paravirt_enabled = 1;
+ pv_info.kernel_rpl = 1;
/* We set up all the lguest overrides for sensitive operations. These
* are detailed with the operations themselves. */
- paravirt_ops.save_fl = save_fl;
- paravirt_ops.restore_fl = restore_fl;
- paravirt_ops.irq_disable = irq_disable;
- paravirt_ops.irq_enable = irq_enable;
- paravirt_ops.load_gdt = lguest_load_gdt;
- paravirt_ops.memory_setup = lguest_memory_setup;
- paravirt_ops.cpuid = lguest_cpuid;
- paravirt_ops.write_cr3 = lguest_write_cr3;
- paravirt_ops.flush_tlb_user = lguest_flush_tlb_user;
- paravirt_ops.flush_tlb_single = lguest_flush_tlb_single;
- paravirt_ops.flush_tlb_kernel = lguest_flush_tlb_kernel;
- paravirt_ops.set_pte = lguest_set_pte;
- paravirt_ops.set_pte_at = lguest_set_pte_at;
- paravirt_ops.set_pmd = lguest_set_pmd;
+
+ /* interrupt-related operations */
+ pv_irq_ops.init_IRQ = lguest_init_IRQ;
+ pv_irq_ops.save_fl = save_fl;
+ pv_irq_ops.restore_fl = restore_fl;
+ pv_irq_ops.irq_disable = irq_disable;
+ pv_irq_ops.irq_enable = irq_enable;
+ pv_irq_ops.safe_halt = lguest_safe_halt;
+
+ /* init-time operations */
+ pv_init_ops.memory_setup = lguest_memory_setup;
+ pv_init_ops.patch = lguest_patch;
+
+ /* Intercepts of various cpu instructions */
+ pv_cpu_ops.load_gdt = lguest_load_gdt;
+ pv_cpu_ops.cpuid = lguest_cpuid;
+ pv_cpu_ops.load_idt = lguest_load_idt;
+ pv_cpu_ops.iret = lguest_iret;
+ pv_cpu_ops.load_esp0 = lguest_load_esp0;
+ pv_cpu_ops.load_tr_desc = lguest_load_tr_desc;
+ pv_cpu_ops.set_ldt = lguest_set_ldt;
+ pv_cpu_ops.load_tls = lguest_load_tls;
+ pv_cpu_ops.set_debugreg = lguest_set_debugreg;
+ pv_cpu_ops.clts = lguest_clts;
+ pv_cpu_ops.read_cr0 = lguest_read_cr0;
+ pv_cpu_ops.write_cr0 = lguest_write_cr0;
+ pv_cpu_ops.read_cr4 = lguest_read_cr4;
+ pv_cpu_ops.write_cr4 = lguest_write_cr4;
+ pv_cpu_ops.write_gdt_entry = lguest_write_gdt_entry;
+ pv_cpu_ops.write_idt_entry = lguest_write_idt_entry;
+ pv_cpu_ops.wbinvd = lguest_wbinvd;
+ pv_cpu_ops.lazy_mode.enter = paravirt_enter_lazy_cpu;
+ pv_cpu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+
+ /* pagetable management */
+ pv_mmu_ops.write_cr3 = lguest_write_cr3;
+ pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
+ pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
+ pv_mmu_ops.flush_tlb_kernel = lguest_flush_tlb_kernel;
+ pv_mmu_ops.set_pte = lguest_set_pte;
+ pv_mmu_ops.set_pte_at = lguest_set_pte_at;
+ pv_mmu_ops.set_pmd = lguest_set_pmd;
+ pv_mmu_ops.read_cr2 = lguest_read_cr2;
+ pv_mmu_ops.read_cr3 = lguest_read_cr3;
+ pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
+ pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+
#ifdef CONFIG_X86_LOCAL_APIC
- paravirt_ops.apic_write = lguest_apic_write;
- paravirt_ops.apic_write_atomic = lguest_apic_write;
- paravirt_ops.apic_read = lguest_apic_read;
+ /* apic read/write intercepts */
+ pv_apic_ops.apic_write = lguest_apic_write;
+ pv_apic_ops.apic_write_atomic = lguest_apic_write;
+ pv_apic_ops.apic_read = lguest_apic_read;
#endif
- paravirt_ops.load_idt = lguest_load_idt;
- paravirt_ops.iret = lguest_iret;
- paravirt_ops.load_esp0 = lguest_load_esp0;
- paravirt_ops.load_tr_desc = lguest_load_tr_desc;
- paravirt_ops.set_ldt = lguest_set_ldt;
- paravirt_ops.load_tls = lguest_load_tls;
- paravirt_ops.set_debugreg = lguest_set_debugreg;
- paravirt_ops.clts = lguest_clts;
- paravirt_ops.read_cr0 = lguest_read_cr0;
- paravirt_ops.write_cr0 = lguest_write_cr0;
- paravirt_ops.init_IRQ = lguest_init_IRQ;
- paravirt_ops.read_cr2 = lguest_read_cr2;
- paravirt_ops.read_cr3 = lguest_read_cr3;
- paravirt_ops.read_cr4 = lguest_read_cr4;
- paravirt_ops.write_cr4 = lguest_write_cr4;
- paravirt_ops.write_gdt_entry = lguest_write_gdt_entry;
- paravirt_ops.write_idt_entry = lguest_write_idt_entry;
- paravirt_ops.patch = lguest_patch;
- paravirt_ops.safe_halt = lguest_safe_halt;
- paravirt_ops.get_wallclock = lguest_get_wallclock;
- paravirt_ops.time_init = lguest_time_init;
- paravirt_ops.set_lazy_mode = lguest_lazy_mode;
- paravirt_ops.wbinvd = lguest_wbinvd;
+
+ /* time operations */
+ pv_time_ops.get_wallclock = lguest_get_wallclock;
+ pv_time_ops.time_init = lguest_time_init;
+
/* Now is a good time to look at the implementations of these functions
* before returning to the rest of lguest_init(). */
projects / linux-2.6-omap-h63xx.git / blobdiff