Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

[linux-2.6-omap-h63xx.git] / drivers / media / dvb / dvb-usb / dtt200u.h

diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h
index ed41420715180332e81e816086224891aa862be3..005b0a7df3585d1653e61d8b8a63a9278a0ab7cf 100644 (file)
--- a/drivers/media/dvb/dvb-usb/dtt200u.h
+++ b/drivers/media/dvb/dvb-usb/dtt200u.h
@@ -1,5 +1,5 @@
-/* Common header file of Linux driver for the Yakumo/Hama/Typhoon DVB-T
- * USB2.0 receiver.
+/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/
+ * Typhoon/ Yuan DVB-T USB2.0 receiver.
  *
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
  *
@@ -13,6 +13,7 @@
 #define _DVB_USB_DTT200U_H_
 
 #define DVB_USB_LOG_PREFIX "dtt200u"
+
 #include "dvb-usb.h"
 
 extern int dvb_usb_dtt200u_debug;
@@ -22,44 +23,34 @@ extern int dvb_usb_dtt200u_debug;
 /* guessed protocol description (reverse engineered):
  * read
  *  00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
- *  81 - <TS_LOCK> <current frequency divided by 250000>
- *  82 - crash - do not touch
- *  83 - crash - do not touch
- *  84 - remote control
- *  85 - crash - do not touch (OK, stop testing here)
  *  88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
- *  89 - noise-to-signal
- *     8a - unkown 1 byte - signal_strength
- *  8c - ber ???
- *  8d - ber
- *  8e - unc
  */
 
-#define GET_SPEED        0x00
-#define GET_TUNE_STAT    0x81
-#define GET_RC_KEY       0x84
-#define GET_STATUS       0x88
-#define GET_SNR          0x89
-#define GET_SIG_STRENGTH 0x8a
-#define GET_UNK          0x8c
-#define GET_BER          0x8d
-#define GET_UNC          0x8e
+#define GET_SPEED              0x00
+#define GET_TUNE_STATUS                0x81
+#define GET_RC_CODE            0x84
+#define GET_CONFIGURATION      0x88
+#define GET_AGC                        0x89
+#define GET_SNR                        0x8a
+#define GET_VIT_ERR_CNT                0x8c
+#define GET_RS_ERR_CNT         0x8d
+#define GET_RS_UNCOR_BLK_CNT   0x8e
 
 /* write
- *  01 - reset the demod
+ *  01 - init
  *  02 - frequency (divided by 250000)
  *  03 - bandwidth
  *  04 - pid table (index pid(7:0) pid(12:8))
  *  05 - reset the pid table
- *  08 - demod transfer enabled or not (FX2 transfer is enabled by default)
+ *  08 - transfer switch
  */
 
-#define RESET_DEMOD      0x01
-#define SET_FREQUENCY    0x02
-#define SET_BANDWIDTH    0x03
-#define SET_PID_FILTER   0x04
-#define RESET_PID_FILTER 0x05
-#define SET_TS_CTRL      0x08
+#define SET_INIT               0x01
+#define SET_RF_FREQ            0x02
+#define SET_BANDWIDTH          0x03
+#define SET_PID_FILTER         0x04
+#define RESET_PID_FILTER       0x05
+#define SET_STREAMING          0x08
 
 extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d);