select VIDEOBUF_GEN
config VIDEO_BTCX
+ depends on PCI
tristate
config VIDEO_IR
V4L devices.
In doubt, say N.
+config VIDEO_FIXED_MINOR_RANGES
+ bool "Enable old-style fixed minor ranges for video devices"
+ default n
+ ---help---
+ Say Y here to enable the old-style fixed-range minor assignments.
+ Only useful if you rely on the old behavior and use mknod instead of udev.
+
+ When in doubt, say N.
+
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
default y
To compile this driver as a module, choose M here: the
module will be called saa5249.
-config TUNER_3036
- tristate "SAB3036 tuner"
- depends on I2C && VIDEO_V4L1
- help
- Say Y here to include support for Philips SAB3036 compatible tuners.
- If in doubt, say N.
-
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
driver for PCI. There is a product page at
<http://www.stradis.com/>.
-config VIDEO_ZORAN
- tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
- help
- Say Y for support for MJPEG capture cards based on the Zoran
- 36057/36067 PCI controller chipset. This includes the Iomega
- Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
- a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
- more information, check <file:Documentation/video4linux/Zoran>.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36067.
-
-config VIDEO_ZORAN_DC30
- tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
- card. This also supports really old DC10 cards based on the
- zr36050 MJPEG codec and zr36016 VFE.
-
-config VIDEO_ZORAN_ZR36060
- tristate "Zoran ZR36060"
- depends on VIDEO_ZORAN
- help
- Say Y to support Zoran boards based on 36060 chips.
- This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
- and 33 R10 and AverMedia 6 boards.
-
-config VIDEO_ZORAN_BUZ
- tristate "Iomega Buz support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Iomega Buz MJPEG capture/playback card.
-
-config VIDEO_ZORAN_DC10
- tristate "Pinnacle/Miro DC10(+) support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33
- tristate "Linux Media Labs LML33 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Linux Media Labs LML33 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33R10
- tristate "Linux Media Labs LML33R10 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
- help
- support for the Linux Media Labs LML33R10 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_AVS6EYES
- tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
- depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the AverMedia 6 Eyes video surveillance card.
+source "drivers/media/video/zoran/Kconfig"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
To compile this driver as a module, choose M here: the
module will be called mxb.
-config VIDEO_DPC
- tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on PCI && VIDEO_V4L1 && I2C
- select VIDEO_SAA7146_VV
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- ---help---
- This is a video4linux driver for the 'dpc7146 demonstration
- board' by Philips-Semiconductors. It's the reference design
- for SAA7146 bases boards, so if you have some unsupported
- saa7146 based, analog video card, chances are good that it
- will work with this skeleton driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dpc7146.
-
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA
+ select VIDEOBUF_GEN
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config MT9M001_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9m001"
+ depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+ help
+ Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_MT9M111
+ tristate "mt9m111 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9M111 cameras from Micron
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config MT9V022_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9v022"
+ depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+ help
+ Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
#
# USB Multimedia device configuration
#
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on VIDEO_V4L1 && I2C
- select VIDEO_OVCAMCHIP
+ depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
endif # V4L_USB_DRIVERS
-config SOC_CAMERA
- tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA
- select VIDEOBUF_GEN
- help
- SoC Camera is a common API to several cameras, not connecting
- over a bus like PCI or USB. For example some i2c camera connected
- directly to the data bus of an SoC.
-
-config SOC_CAMERA_MT9M001
- tristate "mt9m001 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
- help
- This driver supports MT9M001 cameras from Micron, monochrome
- and colour models.
-
-config MT9M001_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9m001"
- depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
- help
- Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_MT9V022
- tristate "mt9v022 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
- help
- This driver supports MT9V022 cameras from Micron
-
-config MT9V022_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9v022"
- depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
- help
- Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_PLATFORM
- tristate "platform camera support"
- depends on SOC_CAMERA
- help
- This is a generic SoC camera platform driver, useful for testing
-
-config VIDEO_PXA27x
- tristate "PXA27x Quick Capture Interface driver"
- depends on VIDEO_DEV && PXA27x
- select SOC_CAMERA
- select VIDEOBUF_DMA_SG
- ---help---
- This is a v4l2 driver for the PXA27x Quick Capture Interface
-
-config VIDEO_SH_MOBILE_CEU
- tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV && HAS_DMA
- select SOC_CAMERA
- select VIDEOBUF_DMA_CONTIG
- ---help---
- This is a v4l2 driver for the SuperH Mobile CEU Interface
-
endif # VIDEO_CAPTURE_DRIVERS
projects / linux-2.6-omap-h63xx.git / blobdiff