*/
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/signal.h>
#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/video_encoder.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <linux/ioctl.h>
#include <asm/uaccess.h>
-
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
#include <linux/videodev.h>
+#include <linux/video_encoder.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
MODULE_DESCRIPTION("Brooktree-856A video encoder driver");
MODULE_AUTHOR("Mike Bernson & Dave Perks");
MODULE_LICENSE("GPL");
-
-#define I2C_NAME(s) (s)->name
-
-
-static int debug = 0;
+static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
/* ----------------------------------------------------------------------- */
-#define REG_OFFSET 0xDA
-#define BT856_NR_REG 6
+#define BT856_REG_OFFSET 0xDA
+#define BT856_NR_REG 6
struct bt856 {
unsigned char reg[BT856_NR_REG];
int enable;
};
-#define I2C_BT856 0x88
-
/* ----------------------------------------------------------------------- */
-static inline int
-bt856_write (struct i2c_client *client,
- u8 reg,
- u8 value)
+static inline int bt856_write(struct i2c_client *client, u8 reg, u8 value)
{
struct bt856 *encoder = i2c_get_clientdata(client);
- encoder->reg[reg - REG_OFFSET] = value;
+ encoder->reg[reg - BT856_REG_OFFSET] = value;
return i2c_smbus_write_byte_data(client, reg, value);
}
-static inline int
-bt856_setbit (struct i2c_client *client,
- u8 reg,
- u8 bit,
- u8 value)
+static inline int bt856_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value)
{
struct bt856 *encoder = i2c_get_clientdata(client);
return bt856_write(client, reg,
- (encoder->
- reg[reg - REG_OFFSET] & ~(1 << bit)) |
- (value ? (1 << bit) : 0));
+ (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) |
+ (value ? (1 << bit) : 0));
}
-static void
-bt856_dump (struct i2c_client *client)
+static void bt856_dump(struct i2c_client *client)
{
int i;
struct bt856 *encoder = i2c_get_clientdata(client);
- printk(KERN_INFO "%s: register dump:", I2C_NAME(client));
+ v4l_info(client, "register dump:\n");
for (i = 0; i < BT856_NR_REG; i += 2)
- printk(" %02x", encoder->reg[i]);
- printk("\n");
+ printk(KERN_CONT " %02x", encoder->reg[i]);
+ printk(KERN_CONT "\n");
}
/* ----------------------------------------------------------------------- */
-static int
-bt856_command (struct i2c_client *client,
- unsigned int cmd,
- void *arg)
+static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg)
{
struct bt856 *encoder = i2c_get_clientdata(client);
switch (cmd) {
-
case 0:
/* This is just for testing!!! */
- dprintk(1, KERN_INFO "bt856: init\n");
+ v4l_dbg(1, debug, client, "init\n");
bt856_write(client, 0xdc, 0x18);
bt856_write(client, 0xda, 0);
bt856_write(client, 0xde, 0);
bt856_setbit(client, 0xdc, 4, 1);
switch (encoder->norm) {
-
case VIDEO_MODE_NTSC:
bt856_setbit(client, 0xdc, 2, 0);
break;
{
struct video_encoder_capability *cap = arg;
- dprintk(1, KERN_INFO "%s: get capabilities\n",
- I2C_NAME(client));
+ v4l_dbg(1, debug, client, "get capabilities\n");
cap->flags = VIDEO_ENCODER_PAL |
VIDEO_ENCODER_NTSC |
VIDEO_ENCODER_CCIR;
cap->inputs = 2;
cap->outputs = 1;
- }
break;
+ }
case ENCODER_SET_NORM:
{
int *iarg = arg;
- dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set norm %d\n", *iarg);
switch (*iarg) {
-
case VIDEO_MODE_NTSC:
bt856_setbit(client, 0xdc, 2, 0);
break;
default:
return -EINVAL;
-
}
encoder->norm = *iarg;
if (debug != 0)
bt856_dump(client);
- }
break;
+ }
case ENCODER_SET_INPUT:
{
int *iarg = arg;
- dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set input %d\n", *iarg);
/* We only have video bus.
* iarg = 0: input is from bt819
* iarg = 1: input is from ZR36060 */
-
switch (*iarg) {
-
case 0:
bt856_setbit(client, 0xde, 4, 0);
bt856_setbit(client, 0xde, 3, 1);
break;
default:
return -EINVAL;
-
}
if (debug != 0)
bt856_dump(client);
- }
break;
+ }
case ENCODER_SET_OUTPUT:
{
int *iarg = arg;
- dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set output %d\n", *iarg);
/* not much choice of outputs */
- if (*iarg != 0) {
+ if (*iarg != 0)
return -EINVAL;
- }
- }
break;
+ }
case ENCODER_ENABLE_OUTPUT:
{
encoder->enable = !!*iarg;
- dprintk(1, KERN_INFO "%s: enable output %d\n",
- I2C_NAME(client), encoder->enable);
- }
+ v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable);
break;
+ }
default:
return -EINVAL;
/* ----------------------------------------------------------------------- */
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
-
-static unsigned short ignore = I2C_CLIENT_END;
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .probe = &ignore,
- .ignore = &ignore,
-};
+static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
-static struct i2c_driver i2c_driver_bt856;
+I2C_CLIENT_INSMOD;
-static int
-bt856_detect_client (struct i2c_adapter *adapter,
- int address,
- int kind)
+static int bt856_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- int i;
- struct i2c_client *client;
struct bt856 *encoder;
- dprintk(1,
- KERN_INFO
- "bt856.c: detecting bt856 client on address 0x%x\n",
- address << 1);
-
/* Check if the adapter supports the needed features */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
- return -ENOMEM;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &i2c_driver_bt856;
- strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client)));
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL);
- if (encoder == NULL) {
- kfree(client);
+ if (encoder == NULL)
return -ENOMEM;
- }
encoder->norm = VIDEO_MODE_NTSC;
encoder->enable = 1;
i2c_set_clientdata(client, encoder);
- i = i2c_attach_client(client);
- if (i) {
- kfree(client);
- kfree(encoder);
- return i;
- }
-
bt856_write(client, 0xdc, 0x18);
bt856_write(client, 0xda, 0);
bt856_write(client, 0xde, 0);
if (debug != 0)
bt856_dump(client);
-
- dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client),
- client->addr << 1);
-
return 0;
}
-static int
-bt856_attach_adapter (struct i2c_adapter *adapter)
+static int bt856_remove(struct i2c_client *client)
{
- dprintk(1,
- KERN_INFO
- "bt856.c: starting probe for adapter %s (0x%x)\n",
- I2C_NAME(adapter), adapter->id);
- return i2c_probe(adapter, &addr_data, &bt856_detect_client);
-}
-
-static int
-bt856_detach_client (struct i2c_client *client)
-{
- struct bt856 *encoder = i2c_get_clientdata(client);
- int err;
-
- err = i2c_detach_client(client);
- if (err) {
- return err;
- }
-
- kfree(encoder);
- kfree(client);
-
+ kfree(i2c_get_clientdata(client));
return 0;
}
-/* ----------------------------------------------------------------------- */
-
-static struct i2c_driver i2c_driver_bt856 = {
- .driver = {
- .name = "bt856",
- },
-
- .id = I2C_DRIVERID_BT856,
+static const struct i2c_device_id bt856_id[] = {
+ { "bt856", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bt856_id);
- .attach_adapter = bt856_attach_adapter,
- .detach_client = bt856_detach_client,
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "bt856",
+ .driverid = I2C_DRIVERID_BT856,
.command = bt856_command,
+ .probe = bt856_probe,
+ .remove = bt856_remove,
+ .id_table = bt856_id,
};
-
-static int __init
-bt856_init (void)
-{
- return i2c_add_driver(&i2c_driver_bt856);
-}
-
-static void __exit
-bt856_exit (void)
-{
- i2c_del_driver(&i2c_driver_bt856);
-}
-
-module_init(bt856_init);
-module_exit(bt856_exit);