#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
+#include "tuner-simple.h"
+#include "tda9887.h"
+#include "s5h1411.h"
MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages [dvb]");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
#define dprintk(level,fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg)
.no_tuner = 1,
};
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 45600,
+ .no_tuner = 1,
+};
+
+static struct mt352_config dvico_fusionhdtv_mt352_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 4560,
+ .no_tuner = 1,
+ .demod_init = dvico_fusionhdtv_demod_init,
+};
+
static struct zl10353_config dvico_fusionhdtv_plus_v1_1 = {
.demod_address = 0x0f,
};
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
- dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
+ dprintk(1, "%s: index = %d\n", __func__, index);
if (index == 0)
cx_clear(MO_GP0_IO, 8);
else
return 0;
}
+static int cx88_pci_nano_callback(void *ptr, int command, int arg)
+{
+ struct cx88_core *core = ptr;
+
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* Send the tuner in then out of reset */
+ dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
+
+ switch (core->boardnr) {
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ /* GPIO-4 xc3028 tuner */
+
+ cx_set(MO_GP0_IO, 0x00001000);
+ cx_clear(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ cx_set(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ break;
+ }
+
+ break;
+ case XC2028_RESET_CLK:
+ dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
+ break;
+ default:
+ dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
+ command, arg);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct cx24123_config geniatech_dvbs_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
.mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
};
+static struct s5h1409_config dvico_hdtv5_pci_nano_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_OFF,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+ .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config kworld_atsc_120_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_OFF,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+ .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
.i2c_address = 0x64,
.if_khz = 5380,
.tuner_callback = cx88_tuner_callback,
};
+static struct zl10353_config cx88_geniatech_x8000_mt = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+};
+
+static struct s5h1411_config dvico_fusionhdtv7_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_ON,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING
+};
+
+static struct xc5000_config dvico_fusionhdtv7_tuner_config = {
+ .i2c_address = 0xc2 >> 1,
+ .if_khz = 5380,
+ .tuner_callback = cx88_tuner_callback,
+};
+
+static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
+{
+ struct dvb_frontend *fe;
+ struct xc2028_ctrl ctl;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->core->i2c_adap,
+ .i2c_addr = addr,
+ .ctrl = &ctl,
+ .callback = cx88_tuner_callback,
+ };
+
+ if (!dev->dvb.frontend) {
+ printk(KERN_ERR "%s/2: dvb frontend not attached. "
+ "Can't attach xc3028\n",
+ dev->core->name);
+ return -EINVAL;
+ }
+
+ /*
+ * Some xc3028 devices may be hidden by an I2C gate. This is known
+ * to happen with some s5h1409-based devices.
+ * Now that I2C gate is open, sets up xc3028 configuration
+ */
+ cx88_setup_xc3028(dev->core, &ctl);
+
+ fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+ if (!fe) {
+ printk(KERN_ERR "%s/2: xc3028 attach failed\n",
+ dev->core->name);
+ dvb_frontend_detach(dev->dvb.frontend);
+ dvb_unregister_frontend(dev->dvb.frontend);
+ dev->dvb.frontend = NULL;
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "%s/2: xc3028 attached\n",
+ dev->core->name);
+
+ return 0;
+}
+
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
&hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap, DVB_PLL_FMD1216ME);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&dev->vp3054->adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap, DVB_PLL_FMD1216ME);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
#else
printk(KERN_ERR "%s/2: built without vp3054 support\n", dev->core->name);
&dvico_fusionhdtv_hybrid,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_THOMSON_FE6600);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_THOMSON_FE6600);
}
break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ dev->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend == NULL)
+ dev->dvb.frontend = dvb_attach(mt352_attach,
+ &dvico_fusionhdtv_mt352_xc3028,
+ &dev->core->i2c_adap);
+ /*
+ * On this board, the demod provides the I2C bus pullup.
+ * We must not permit gate_ctrl to be performed, or
+ * the xc3028 cannot communicate on the bus.
+ */
+ if (dev->dvb.frontend)
+ dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+ if (attach_xc3028(0x61, dev) < 0)
+ return -EINVAL;
+ break;
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_THOMSON_DTT761X);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_THOMSON_DTT761X);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_MICROTUNE_4042);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_MICROTUNE_4042FI5);
}
}
break;
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_THOMSON_DTT761X);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_THOMSON_DTT761X);
}
}
break;
&fusionhdtv_5_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_LG_TDVS_H06XF);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_LG_TDVS_H06XF);
+ dvb_attach(tda9887_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x43);
}
}
break;
&pchdtv_hd5500,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_LG_TDVS_H06XF);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_LG_TDVS_H06XF);
+ dvb_attach(tda9887_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x43);
}
}
break;
&ati_hdtvwonder,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_TUV1236D);
+ dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap, 0x61,
+ TUNER_PHILIPS_TUV1236D);
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
&pinnacle_pctv_hd_800i_tuner_config);
}
break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ &dvico_hdtv5_pci_nano_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->core->i2c_adap,
+ .i2c_addr = 0x61,
+ .callback = cx88_pci_nano_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ .scode_table = XC3028_FE_OREN538,
+ };
+
+ fe = dvb_attach(xc2028_attach,
+ dev->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+ dev->dvb.frontend = dvb_attach(zl10353_attach,
+ &cx88_geniatech_x8000_mt,
+ &dev->core->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0)
+ return -EINVAL;
+ break;
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ dev->ts_gen_cntrl = 0x00;
+
+ dev->dvb.frontend = dvb_attach(zl10353_attach,
+ &cx88_geniatech_x8000_mt,
+ &dev->core->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0)
+ return -EINVAL;
+ break;
+ case CX88_BOARD_KWORLD_ATSC_120:
+ dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ &kworld_atsc_120_config,
+ &dev->core->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0)
+ return -EINVAL;
+ break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ dev->dvb.frontend = dvb_attach(s5h1411_attach,
+ &dvico_fusionhdtv7_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ /* tuner_config.video_dev must point to
+ * i2c_adap.algo_data
+ */
+ dvico_fusionhdtv7_tuner_config.priv =
+ dev->core->i2c_adap.algo_data;
+ dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap,
+ &dvico_fusionhdtv7_tuner_config);
+ }
+ break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
- printk(KERN_ERR "%s/2: frontend initialization failed\n", dev->core->name);
- return -1;
+ printk(KERN_ERR
+ "%s/2: frontend initialization failed\n",
+ dev->core->name);
+ return -EINVAL;
}
/* Ensure all frontends negotiate bus access */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* register everything */
- return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
+ return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
+ &dev->pci->dev, adapter_nr);
}
/* ----------------------------------------------------------- */
{
struct cx88_core *core = drv->core;
int err = 0;
- dprintk( 1, "%s\n", __FUNCTION__);
+ dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
{
struct cx88_core *core = drv->core;
int err = 0;
- dprintk( 1, "%s\n", __FUNCTION__);
+ dprintk( 1, "%s\n", __func__);
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
struct cx8802_dev *dev = drv->core->dvbdev;
int err;
- dprintk( 1, "%s\n", __FUNCTION__);
+ dprintk( 1, "%s\n", __func__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->boardnr,
core->name,
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
- videobuf_queue_pci_init(&dev->dvb.dvbq, &dvb_qops,
- dev->pci, &dev->slock,
+ videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops,
+ &dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
sizeof(struct cx88_buffer),
struct cx8802_dev *dev = drv->core->dvbdev;
/* dvb */
- videobuf_dvb_unregister(&dev->dvb);
+ if (dev->dvb.frontend)
+ videobuf_dvb_unregister(&dev->dvb);
vp3054_i2c_remove(dev);
projects / linux-2.6-omap-h63xx.git / blobdiff