#include "cx22702.h"
#include "or51132.h"
#include "lgdt330x.h"
+#include "s5h1409.h"
+#include "xc5000.h"
#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
.lnb_polarity = 1,
};
+static struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_PARALLEL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+ .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
+ .i2c_address = 0x64,
+ .if_khz = 5380,
+ .tuner_callback = cx88_tuner_callback,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
- switch (dev->core->board) {
+ switch (dev->core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
+ /* MT352 is on a secondary I2C bus made from some GPIO lines */
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
- &((struct vp3054_i2c_state *)dev->card_priv)->adap);
+ &dev->vp3054->adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap, DVB_PLL_FMD1216ME);
}
#else
- printk("%s: built without vp3054 support\n", dev->core->name);
+ printk(KERN_ERR "%s/2: built without vp3054 support\n", dev->core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ &pinnacle_pctv_hd_800i_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ /* tuner_config.video_dev must point to
+ * i2c_adap.algo_data
+ */
+ pinnacle_pctv_hd_800i_tuner_config.priv =
+ dev->core->i2c_adap.algo_data;
+ dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap,
+ &pinnacle_pctv_hd_800i_tuner_config);
+ }
+ break;
default:
- printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
+ printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
break;
}
if (NULL == dev->dvb.frontend) {
- printk("%s: frontend initialization failed\n",dev->core->name);
+ printk(KERN_ERR "%s/2: frontend initialization failed\n", dev->core->name);
return -1;
}
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* We arrive here with either the cx23416 or the cx22702
* on the bus. Take the bus from the cx23416 and enable the
int err = 0;
dprintk( 1, "%s\n", __FUNCTION__);
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Do Nothing, leave the cx22702 on the bus. */
break;
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- core->board,
+ core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
- if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB))
+ if (!(core->board.mpeg & CX88_MPEG_DVB))
goto fail_core;
/* If vp3054 isn't enabled, a stub will just return 0 */
goto fail_core;
/* dvb stuff */
- printk("%s/2: cx2388x based dvb card\n", core->name);
- videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
+ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
+ videobuf_queue_pci_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
dev);
err = dvb_register(dev);
if (err != 0)
- printk("%s dvb_register failed err = %d\n", __FUNCTION__, err);
+ printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
+ core->name, err);
fail_core:
return err;
static int dvb_init(void)
{
- printk(KERN_INFO "cx2388x dvb driver version %d.%d.%d loaded\n",
+ printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);