#include <media/tveeprom.h>
#include <media/saa7115.h>
#include <media/v4l2-chip-ident.h>
+#include "tuner-xc2028.h"
/* var to keep track of the number of array elements in use */
int ivtv_cards_active = 0;
"\t\t\t20 = Club3D ZAP-TV1x01\n"
"\t\t\t21 = AverTV MCE 116 Plus\n"
"\t\t\t22 = ASUS Falcon2\n"
+ "\t\t\t23 = AverMedia PVR-150 Plus\n"
+ "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
itv->v4l2_cap = itv->card->v4l2_capabilities;
itv->card_name = itv->card->name;
+ itv->card_i2c = itv->card->i2c;
/* If this is a PVR500 then it should be possible to detect whether it is the
first or second unit by looking at the subsystem device ID: is bit 4 is
This detection is needed since the eeprom reports incorrectly that a radio is
present on the second unit. */
if (tv.model / 1000 == 23) {
+ static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = {
+ .radio = { 0x60, I2C_CLIENT_END },
+ .demod = { 0x43, I2C_CLIENT_END },
+ .tv = { 0x61, I2C_CLIENT_END },
+ };
+
itv->card_name = "WinTV PVR 500";
+ itv->card_i2c = &ivtv_i2c_radio;
if (pci_slot == 8 || pci_slot == 9) {
int is_first = (pci_slot & 1) == 0;
IVTV_ERR("Defaulting to %s card\n", itv->card->name);
IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
- IVTV_ERR("Prefix your subject line with [UNKNOWN CARD].\n");
+ IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
}
itv->v4l2_cap = itv->card->v4l2_capabilities;
itv->card_name = itv->card->name;
+ itv->card_i2c = itv->card->i2c;
}
/* Precondition: the ivtv structure has been memset to 0. Only
atomic_set(&itv->yuv_info.next_dma_frame, -1);
itv->yuv_info.lace_mode = ivtv_yuv_mode;
itv->yuv_info.lace_threshold = ivtv_yuv_threshold;
+ itv->yuv_info.max_frames_buffered = 3;
return 0;
}
return 0;
}
-static void ivtv_request_module(struct ivtv *itv, const char *name)
+static u32 ivtv_request_module(struct ivtv *itv, u32 hw,
+ const char *name, u32 id)
{
+ if ((hw & id) == 0)
+ return hw;
if (request_module(name) != 0) {
IVTV_ERR("Failed to load module %s\n", name);
- } else {
- IVTV_DEBUG_INFO("Loaded module %s\n", name);
+ return hw & ~id;
}
+ IVTV_DEBUG_INFO("Loaded module %s\n", name);
+ return hw;
}
static void ivtv_load_and_init_modules(struct ivtv *itv)
{
u32 hw = itv->card->hw_all;
- int i;
+ unsigned i;
/* load modules */
#ifndef CONFIG_VIDEO_TUNER
- if (hw & IVTV_HW_TUNER) {
- if (itv->options.tuner == TUNER_XC2028) {
- IVTV_INFO("Xceive tuner not yet supported, only composite and S-Video inputs will be available\n");
- itv->tunerid = 1;
- }
- else {
- ivtv_request_module(itv, "tuner");
- }
- }
+ hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER);
#endif
#ifndef CONFIG_VIDEO_CX25840
- if (hw & IVTV_HW_CX25840)
- ivtv_request_module(itv, "cx25840");
+ hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840);
#endif
#ifndef CONFIG_VIDEO_SAA711X
- if (hw & IVTV_HW_SAA711X)
- ivtv_request_module(itv, "saa7115");
+ hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X);
#endif
#ifndef CONFIG_VIDEO_SAA7127
- if (hw & IVTV_HW_SAA7127)
- ivtv_request_module(itv, "saa7127");
+ hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127);
#endif
- if (hw & IVTV_HW_SAA717X)
- ivtv_request_module(itv, "saa717x");
+ hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X);
#ifndef CONFIG_VIDEO_UPD64031A
- if (hw & IVTV_HW_UPD64031A)
- ivtv_request_module(itv, "upd64031a");
+ hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A);
#endif
#ifndef CONFIG_VIDEO_UPD64083
- if (hw & IVTV_HW_UPD6408X)
- ivtv_request_module(itv, "upd64083");
+ hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X);
#endif
#ifndef CONFIG_VIDEO_MSP3400
- if (hw & IVTV_HW_MSP34XX)
- ivtv_request_module(itv, "msp3400");
+ hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX);
#endif
#ifndef CONFIG_VIDEO_VP27SMPX
- if (hw & IVTV_HW_VP27SMPX)
- ivtv_request_module(itv, "vp27smpx");
+ hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX);
#endif
- if (hw & IVTV_HW_TVAUDIO)
- ivtv_request_module(itv, "tvaudio");
#ifndef CONFIG_VIDEO_WM8775
- if (hw & IVTV_HW_WM8775)
- ivtv_request_module(itv, "wm8775");
+ hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775);
#endif
#ifndef CONFIG_VIDEO_WM8739
- if (hw & IVTV_HW_WM8739)
- ivtv_request_module(itv, "wm8739");
+ hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739);
#endif
#ifndef CONFIG_VIDEO_CS53L32A
- if (hw & IVTV_HW_CS53L32A)
- ivtv_request_module(itv, "cs53l32a");
+ hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A);
#endif
#ifndef CONFIG_VIDEO_M52790
- if (hw & IVTV_HW_M52790)
- ivtv_request_module(itv, "m52790");
+ hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790);
#endif
/* check which i2c devices are actually found */
if (!(device & hw))
continue;
- if (device == IVTV_HW_GPIO) {
- /* GPIO is always available */
- itv->hw_flags |= IVTV_HW_GPIO;
+ if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) {
+ /* GPIO and TVEEPROM do not use i2c probing */
+ itv->hw_flags |= device;
continue;
}
+ ivtv_i2c_register(itv, i);
if (ivtv_i2c_hw_addr(itv, device) > 0)
itv->hw_flags |= device;
}
const struct pci_device_id *pci_id)
{
int retval = 0;
- int yuv_buf_size;
int vbi_buf_size;
struct ivtv *itv;
}
itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC);
- if (itv == 0) {
+ if (itv == NULL) {
spin_unlock(&ivtv_cards_lock);
return -ENOMEM;
}
IVTV_DEBUG_INFO("Active card count: %d.\n", ivtv_cards_active);
if (itv->card->hw_all & IVTV_HW_TVEEPROM) {
-#ifdef CONFIG_VIDEO_TVEEPROM_MODULE
- ivtv_request_module(itv, "tveeprom");
-#endif
/* Based on the model number the cardtype may be changed.
The PCI IDs are not always reliable. */
ivtv_process_eeprom(itv);
itv->is_50hz = 1;
itv->is_out_50hz = 1;
}
+
+ itv->yuv_info.osd_full_w = 720;
+ itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480;
+ itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
+ itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
+
itv->params.video_gop_size = itv->is_60hz ? 15 : 12;
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000;
-
- /* 0x15180 == 720 * 480 / 4, 0x19500 == 720 * 576 / 4 */
- yuv_buf_size = itv->is_60hz ? 0x15180 : 0x19500;
- itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = yuv_buf_size / 2;
- itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = yuv_buf_size / 8;
+ itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000;
+ itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000;
/* Setup VBI Raw Size. Should be big enough to hold PAL.
It is possible to switch between PAL and NTSC, so we need to
if (itv->options.radio > 0)
itv->v4l2_cap |= V4L2_CAP_RADIO;
- if (itv->options.tuner > -1 && itv->tunerid == 0) {
+ if (itv->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = itv->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
+ setup.tuner_callback = (setup.type == TUNER_XC2028) ?
+ ivtv_reset_tuner_gpio : NULL;
ivtv_call_i2c_clients(itv, TUNER_SET_TYPE_ADDR, &setup);
+ if (setup.type == TUNER_XC2028) {
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ };
+ struct v4l2_priv_tun_config cfg = {
+ .tuner = itv->options.tuner,
+ .priv = &ctrl,
+ };
+ ivtv_call_i2c_clients(itv, TUNER_SET_CONFIG, &cfg);
+ }
}
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
projects / linux-2.6-omap-h63xx.git / blobdiff