/***************************************************************************
- * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera *
+ * Plug-in for PAS106B image sensor connected to the SN9C1xx PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
#include "sn9c102_sensor.h"
-static struct sn9c102_sensor pas106b;
-
-
static int pas106b_init(struct sn9c102_device* cam)
{
int err = 0;
- err += sn9c102_write_reg(cam, 0x00, 0x10);
- err += sn9c102_write_reg(cam, 0x00, 0x11);
- err += sn9c102_write_reg(cam, 0x00, 0x14);
- err += sn9c102_write_reg(cam, 0x20, 0x17);
- err += sn9c102_write_reg(cam, 0x20, 0x19);
- err += sn9c102_write_reg(cam, 0x09, 0x18);
+ err = sn9c102_write_const_regs(cam, {0x00, 0x10}, {0x00, 0x11},
+ {0x00, 0x14}, {0x20, 0x17},
+ {0x20, 0x19}, {0x09, 0x18});
err += sn9c102_i2c_write(cam, 0x02, 0x0c);
err += sn9c102_i2c_write(cam, 0x05, 0x5a);
static int pas106b_set_crop(struct sn9c102_device* cam,
const struct v4l2_rect* rect)
{
- struct sn9c102_sensor* s = &pas106b;
+ struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
int err = 0;
u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
}
-static struct sn9c102_sensor pas106b = {
+static const struct sn9c102_sensor pas106b = {
.name = "PAS106B",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+ .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
.interface = SN9C102_I2C_2WIRES,
int sn9c102_probe_pas106b(struct sn9c102_device* cam)
{
- int r0 = 0, r1 = 0, err = 0;
+ int r0 = 0, r1 = 0;
unsigned int pid = 0;
/*
Minimal initialization to enable the I2C communication
NOTE: do NOT change the values!
*/
- err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */
- err += sn9c102_write_reg(cam, 0x00, 0x01); /* sensor power on */
- err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */
- if (err)
+ if (sn9c102_write_const_regs(cam,
+ {0x01, 0x01}, /* sensor power down */
+ {0x00, 0x01}, /* sensor power on */
+ {0x28, 0x17})) /* sensor clock at 24 MHz */
return -EIO;
r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00);
r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01);
-
if (r0 < 0 || r1 < 0)
return -EIO;