#include <linux/dvb/frontend.h>
#include "dvb_frontend.h"
+
#define PREFIX "xc2028"
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable verbose debug messages");
+
+static char audio_std[8];
+module_param_string(audio_std, audio_std, sizeof(audio_std), 0);
+MODULE_PARM_DESC(audio_std,
+ "Audio standard. XC3028 audio decoder explicitly "
+ "needs to know what audio\n"
+ "standard is needed for some video standards with audio A2 or NICAM.\n"
+ "The valid values are:\n"
+ "A2\n"
+ "A2/A\n"
+ "A2/B\n"
+ "NICAM\n"
+ "NICAM/A\n"
+ "NICAM/B\n");
+
static LIST_HEAD(xc2028_list);
+static DEFINE_MUTEX(xc2028_list_mutex);
+
/* struct for storing firmware table */
struct firmware_description {
unsigned int type;
v4l2_std_id id;
+ __u16 int_freq;
unsigned char *ptr;
unsigned int size;
};
+struct firmware_properties {
+ unsigned int type;
+ v4l2_std_id id;
+ v4l2_std_id std_req;
+ __u16 int_freq;
+ unsigned int scode_table;
+ int scode_nr;
+};
+
struct xc2028_data {
struct list_head xc2028_list;
struct tuner_i2c_props i2c_props;
int (*tuner_callback) (void *dev,
int command, int arg);
- struct device *dev;
void *video_dev;
int count;
__u32 frequency;
struct firmware_description *firm;
int firm_size;
+ __u16 firm_version;
- __u16 version;
+ __u16 hwmodel;
+ __u16 hwvers;
struct xc2028_ctrl ctrl;
- v4l2_std_id firm_type; /* video stds supported
- by current firmware */
- fe_bandwidth_t bandwidth; /* Firmware bandwidth:
- 6M, 7M or 8M */
- int need_load_generic; /* The generic firmware
- were loaded? */
-
- int max_len; /* Max firmware chunk */
-
- enum tuner_mode mode;
- struct i2c_client *i2c_client;
+ struct firmware_properties cur_fw;
struct mutex lock;
};
-#define i2c_send(rc, priv, buf, size) do { \
- rc = tuner_i2c_xfer_send(&priv->i2c_props, buf, size); \
- if (size != rc) \
+#define i2c_send(priv, buf, size) ({ \
+ int _rc; \
+ _rc = tuner_i2c_xfer_send(&priv->i2c_props, buf, size); \
+ if (size != _rc) \
tuner_info("i2c output error: rc = %d (should be %d)\n",\
- rc, (int)size); \
-} while (0)
-
-#define i2c_rcv(rc, priv, buf, size) do { \
- rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, size); \
- if (size != rc) \
- tuner_info("i2c input error: rc = %d (should be %d)\n", \
- rc, (int)size); \
-} while (0)
-
-#define send_seq(priv, data...) do { \
- int rc; \
+ _rc, (int)size); \
+ _rc; \
+})
+
+#define i2c_rcv(priv, buf, size) ({ \
+ int _rc; \
+ _rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, size); \
+ if (size != _rc) \
+ tuner_err("i2c input error: rc = %d (should be %d)\n", \
+ _rc, (int)size); \
+ _rc; \
+})
+
+#define i2c_send_recv(priv, obuf, osize, ibuf, isize) ({ \
+ int _rc; \
+ _rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, obuf, osize, \
+ ibuf, isize); \
+ if (isize != _rc) \
+ tuner_err("i2c input error: rc = %d (should be %d)\n", \
+ _rc, (int)isize); \
+ _rc; \
+})
+
+#define send_seq(priv, data...) ({ \
static u8 _val[] = data; \
+ int _rc; \
if (sizeof(_val) != \
- (rc = tuner_i2c_xfer_send(&priv->i2c_props, \
+ (_rc = tuner_i2c_xfer_send(&priv->i2c_props, \
_val, sizeof(_val)))) { \
- tuner_info("Error on line %d: %d\n", __LINE__, rc); \
- return -EINVAL; \
- } \
- msleep(10); \
-} while (0)
+ tuner_err("Error on line %d: %d\n", __LINE__, _rc); \
+ } else \
+ msleep(10); \
+ _rc; \
+})
-static int xc2028_get_reg(struct xc2028_data *priv, u16 reg)
+static unsigned int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val)
{
- int rc;
unsigned char buf[2];
+ unsigned char ibuf[2];
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s %04x called\n", __FUNCTION__, reg);
- buf[0] = reg;
+ buf[0] = reg >> 8;
+ buf[1] = (unsigned char) reg;
- i2c_send(rc, priv, buf, 1);
- if (rc < 0)
- return rc;
+ if (i2c_send_recv(priv, buf, 2, ibuf, 2) != 2)
+ return -EIO;
- i2c_rcv(rc, priv, buf, 2);
- if (rc < 0)
- return rc;
+ *val = (ibuf[1]) | (ibuf[0] << 8);
+ return 0;
+}
+
+#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0)
+void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
+{
+ if (type & BASE)
+ printk("BASE ");
+ if (type & INIT1)
+ printk("INIT1 ");
+ if (type & F8MHZ)
+ printk("F8MHZ ");
+ if (type & MTS)
+ printk("MTS ");
+ if (type & D2620)
+ printk("D2620 ");
+ if (type & D2633)
+ printk("D2633 ");
+ if (type & DTV6)
+ printk("DTV6 ");
+ if (type & QAM)
+ printk("QAM ");
+ if (type & DTV7)
+ printk("DTV7 ");
+ if (type & DTV78)
+ printk("DTV78 ");
+ if (type & DTV8)
+ printk("DTV8 ");
+ if (type & FM)
+ printk("FM ");
+ if (type & INPUT1)
+ printk("INPUT1 ");
+ if (type & LCD)
+ printk("LCD ");
+ if (type & NOGD)
+ printk("NOGD ");
+ if (type & MONO)
+ printk("MONO ");
+ if (type & ATSC)
+ printk("ATSC ");
+ if (type & IF)
+ printk("IF ");
+ if (type & LG60)
+ printk("LG60 ");
+ if (type & ATI638)
+ printk("ATI638 ");
+ if (type & OREN538)
+ printk("OREN538 ");
+ if (type & OREN36)
+ printk("OREN36 ");
+ if (type & TOYOTA388)
+ printk("TOYOTA388 ");
+ if (type & TOYOTA794)
+ printk("TOYOTA794 ");
+ if (type & DIBCOM52)
+ printk("DIBCOM52 ");
+ if (type & ZARLINK456)
+ printk("ZARLINK456 ");
+ if (type & CHINA)
+ printk("CHINA ");
+ if (type & F6MHZ)
+ printk("F6MHZ ");
+ if (type & INPUT2)
+ printk("INPUT2 ");
+ if (type & SCODE)
+ printk("SCODE ");
+ if (type & HAS_IF)
+ printk("HAS_IF_%d ", int_freq);
+}
+
+static v4l2_std_id parse_audio_std_option(void)
+{
+ if (strcasecmp(audio_std, "A2") == 0)
+ return V4L2_STD_A2;
+ if (strcasecmp(audio_std, "A2/A") == 0)
+ return V4L2_STD_A2_A;
+ if (strcasecmp(audio_std, "A2/B") == 0)
+ return V4L2_STD_A2_B;
+ if (strcasecmp(audio_std, "NICAM") == 0)
+ return V4L2_STD_NICAM;
+ if (strcasecmp(audio_std, "NICAM/A") == 0)
+ return V4L2_STD_NICAM_A;
+ if (strcasecmp(audio_std, "NICAM/B") == 0)
+ return V4L2_STD_NICAM_B;
- return (buf[1]) | (buf[0] << 8);
+ return 0;
}
static void free_firmware(struct xc2028_data *priv)
kfree(priv->firm);
priv->firm = NULL;
- priv->need_load_generic = 1;
+ priv->firm_size = 0;
+
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
}
static int load_all_firmwares(struct dvb_frontend *fe)
int n, n_array;
char name[33];
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
- tuner_info("Loading firmware %s\n", priv->ctrl.fname);
- rc = request_firmware(&fw, priv->ctrl.fname, priv->dev);
+ tuner_dbg("Reading firmware %s\n", priv->ctrl.fname);
+ rc = request_firmware(&fw, priv->ctrl.fname,
+ &priv->i2c_props.adap->dev);
if (rc < 0) {
if (rc == -ENOENT)
- tuner_info("Error: firmware %s not found.\n",
+ tuner_err("Error: firmware %s not found.\n",
priv->ctrl.fname);
else
- tuner_info("Error %d while requesting firmware %s \n",
+ tuner_err("Error %d while requesting firmware %s \n",
rc, priv->ctrl.fname);
return rc;
p = fw->data;
endp = p + fw->size;
- if (fw->size < sizeof(name) - 1 + 2) {
- tuner_info("Error: firmware size is zero!\n");
- rc = -EINVAL;
- goto done;
+ if (fw->size < sizeof(name) - 1 + 2 + 2) {
+ tuner_err("Error: firmware file %s has invalid size!\n",
+ priv->ctrl.fname);
+ goto corrupt;
}
memcpy(name, p, sizeof(name) - 1);
name[sizeof(name) - 1] = 0;
p += sizeof(name) - 1;
- priv->version = le16_to_cpu(*(__u16 *) p);
+ priv->firm_version = le16_to_cpu(*(__u16 *) p);
p += 2;
- tuner_info("firmware: %s, ver %d.%d\n", name,
- priv->version >> 8, priv->version & 0xff);
-
- if (p + 2 > endp)
- goto corrupt;
-
n_array = le16_to_cpu(*(__u16 *) p);
p += 2;
- tuner_info("there are %d firmwares at %s\n", n_array, priv->ctrl.fname);
+ tuner_info("Loading %d firmware images from %s, type: %s, ver %d.%d\n",
+ n_array, priv->ctrl.fname, name,
+ priv->firm_version >> 8, priv->firm_version & 0xff);
priv->firm = kzalloc(sizeof(*priv->firm) * n_array, GFP_KERNEL);
-
- if (!fw) {
- tuner_info("Not enough memory for loading firmware.\n");
+ if (priv->firm == NULL) {
+ tuner_err("Not enough memory to load firmware file.\n");
rc = -ENOMEM;
- goto done;
+ goto err;
}
-
priv->firm_size = n_array;
+
n = -1;
while (p < endp) {
__u32 type, size;
v4l2_std_id id;
+ __u16 int_freq = 0;
n++;
if (n >= n_array) {
- tuner_info("Too much firmwares at the file\n");
+ tuner_err("More firmware images in file than "
+ "were expected!\n");
goto corrupt;
}
/* Checks if there's enough bytes to read */
if (p + sizeof(type) + sizeof(id) + sizeof(size) > endp) {
- tuner_info("Lost firmware!\n");
+ tuner_err("Firmware header is incomplete!\n");
goto corrupt;
}
id = le64_to_cpu(*(v4l2_std_id *) p);
p += sizeof(id);
- size = le32_to_cpu(*(v4l2_std_id *) p);
+ if (type & HAS_IF) {
+ int_freq = le16_to_cpu(*(__u16 *) p);
+ p += sizeof(int_freq);
+ }
+
+ size = le32_to_cpu(*(__u32 *) p);
p += sizeof(size);
if ((!size) || (size + p > endp)) {
- tuner_info("Firmware type %x, id %lx corrupt\n",
- type, (unsigned long)id);
+ tuner_err("Firmware type ");
+ dump_firm_type(type);
+ printk("(%x), id %llx is corrupted "
+ "(size=%d, expected %d)\n",
+ type, (unsigned long long)id,
+ (unsigned)(endp - p), size);
goto corrupt;
}
priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
- if (!priv->firm[n].ptr) {
- tuner_info("Not enough memory.\n");
+ if (priv->firm[n].ptr == NULL) {
+ tuner_err("Not enough memory to load firmware file.\n");
rc = -ENOMEM;
goto err;
}
- tuner_info("Loading firmware type %x, id %lx, size=%d.\n",
- type, (unsigned long)id, size);
+ tuner_dbg("Reading firmware type ");
+ if (debug) {
+ dump_firm_type_and_int_freq(type, int_freq);
+ printk("(%x), id %llx, size=%d.\n",
+ type, (unsigned long long)id, size);
+ }
memcpy(priv->firm[n].ptr, p, size);
priv->firm[n].type = type;
priv->firm[n].id = id;
priv->firm[n].size = size;
+ priv->firm[n].int_freq = int_freq;
p += size;
}
if (n + 1 != priv->firm_size) {
- tuner_info("Firmware file is incomplete!\n");
+ tuner_err("Firmware file is incomplete!\n");
goto corrupt;
}
corrupt:
rc = -EINVAL;
- tuner_info("Error: firmware file is corrupted!\n");
+ tuner_err("Error: firmware file is corrupted!\n");
err:
- tuner_info("Releasing loaded firmware file.\n");
-
+ tuner_info("Releasing partially loaded firmware file.\n");
free_firmware(priv);
done:
release_firmware(fw);
- tuner_info("Firmware files loaded.\n");
+ if (rc == 0)
+ tuner_dbg("Firmware files loaded.\n");
return rc;
}
-static int load_firmware(struct dvb_frontend *fe, unsigned int type,
- v4l2_std_id * id)
+static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
+ v4l2_std_id *id)
{
struct xc2028_data *priv = fe->tuner_priv;
- int i, rc;
- unsigned char *p, *endp, buf[priv->max_len];
+ int i, best_i = -1, best_nr_matches = 0;
+ unsigned int ign_firm_type_mask = 0;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called, want type=", __FUNCTION__);
+ if (debug) {
+ dump_firm_type(type);
+ printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
+ }
if (!priv->firm) {
- printk(KERN_ERR PREFIX "Error! firmware not loaded\n");
+ tuner_err("Error! firmware not loaded\n");
return -EINVAL;
}
- if ((type == 0) && (*id == 0))
+ if (((type & ~SCODE) == 0) && (*id == 0))
*id = V4L2_STD_PAL;
+ if (type & BASE)
+ type &= BASE_TYPES;
+ else if (type & SCODE) {
+ type &= SCODE_TYPES;
+ ign_firm_type_mask = HAS_IF;
+ } else if (type & DTV_TYPES)
+ type &= DTV_TYPES;
+ else if (type & STD_SPECIFIC_TYPES)
+ type &= STD_SPECIFIC_TYPES;
+
/* Seek for exact match */
for (i = 0; i < priv->firm_size; i++) {
- if ((type == priv->firm[i].type) && (*id == priv->firm[i].id))
+ if ((type == (priv->firm[i].type & ~ign_firm_type_mask)) &&
+ (*id == priv->firm[i].id))
goto found;
}
/* Seek for generic video standard match */
for (i = 0; i < priv->firm_size; i++) {
- if ((type == priv->firm[i].type) && (*id & priv->firm[i].id))
- goto found;
+ v4l2_std_id match_mask;
+ int nr_matches;
+
+ if (type != (priv->firm[i].type & ~ign_firm_type_mask))
+ continue;
+
+ match_mask = *id & priv->firm[i].id;
+ if (!match_mask)
+ continue;
+
+ if ((*id & match_mask) == *id)
+ goto found; /* Supports all the requested standards */
+
+ nr_matches = hweight64(match_mask);
+ if (nr_matches > best_nr_matches) {
+ best_nr_matches = nr_matches;
+ best_i = i;
+ }
+ }
+
+ if (best_nr_matches > 0) {
+ tuner_dbg("Selecting best matching firmware (%d bits) for "
+ "type=", best_nr_matches);
+ dump_firm_type(type);
+ printk("(%x), id %016llx:\n", type, (unsigned long long)*id);
+ i = best_i;
+ goto found;
}
/*FIXME: Would make sense to seek for type "hint" match ? */
- tuner_info("Can't find firmware for type=%x, id=%lx\n", type,
- (long int)*id);
- return -EINVAL;
+ i = -ENOENT;
+ goto ret;
found:
*id = priv->firm[i].id;
- tuner_info("Found firmware for type=%x, id=%lx\n", type, (long int)*id);
- p = priv->firm[i].ptr;
-
- if (!p) {
- printk(KERN_ERR PREFIX "Firmware pointer were freed!");
- return -EINVAL;
+ret:
+ tuner_dbg("%s firmware for type=", (i < 0) ? "Can't find" : "Found");
+ if (debug) {
+ dump_firm_type(type);
+ printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
}
- endp = p + priv->firm[i].size;
+ return i;
+}
+
+static int load_firmware(struct dvb_frontend *fe, unsigned int type,
+ v4l2_std_id *id)
+{
+ struct xc2028_data *priv = fe->tuner_priv;
+ int pos, rc;
+ unsigned char *p, *endp, buf[priv->ctrl.max_len];
+
+ tuner_dbg("%s called\n", __FUNCTION__);
+
+ pos = seek_firmware(fe, type, id);
+ if (pos < 0)
+ return pos;
+
+ tuner_info("Loading firmware for type=");
+ dump_firm_type(priv->firm[pos].type);
+ printk("(%x), id %016llx.\n", priv->firm[pos].type,
+ (unsigned long long)*id);
+
+ p = priv->firm[pos].ptr;
+ endp = p + priv->firm[pos].size;
while (p < endp) {
__u16 size;
/* Checks if there's enough bytes to read */
if (p + sizeof(size) > endp) {
- tuner_info("missing bytes\n");
+ tuner_err("Firmware chunk size is wrong\n");
return -EINVAL;
}
rc = priv->tuner_callback(priv->video_dev,
XC2028_TUNER_RESET, 0);
if (rc < 0) {
- tuner_info("Error at RESET code %d\n",
+ tuner_err("Error at RESET code %d\n",
(*p) & 0x7f);
return -EINVAL;
}
continue;
}
+ if (size >= 0xff00) {
+ switch (size) {
+ case 0xff00:
+ rc = priv->tuner_callback(priv->video_dev,
+ XC2028_RESET_CLK, 0);
+ if (rc < 0) {
+ tuner_err("Error at RESET code %d\n",
+ (*p) & 0x7f);
+ return -EINVAL;
+ }
+ break;
+ default:
+ tuner_info("Invalid RESET code %d\n",
+ size & 0x7f);
+ return -EINVAL;
+
+ }
+ continue;
+ }
/* Checks for a sleep command */
if (size & 0x8000) {
}
if ((size + p > endp)) {
- tuner_info("missing bytes: need %d, have %d\n",
+ tuner_err("missing bytes: need %d, have %d\n",
size, (int)(endp - p));
return -EINVAL;
}
/* Sends message chunks */
while (size > 0) {
- int len = (size < priv->max_len - 1) ?
- size : priv->max_len - 1;
+ int len = (size < priv->ctrl.max_len - 1) ?
+ size : priv->ctrl.max_len - 1;
memcpy(buf + 1, p, len);
- i2c_send(rc, priv, buf, len + 1);
+ rc = i2c_send(priv, buf, len + 1);
if (rc < 0) {
- tuner_info("%d returned from send\n", rc);
+ tuner_err("%d returned from send\n", rc);
return -EINVAL;
}
size -= len;
}
}
- return -EINVAL;
+ return 0;
}
-static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode,
- v4l2_std_id std, fe_bandwidth_t bandwidth)
+static int load_scode(struct dvb_frontend *fe, unsigned int type,
+ v4l2_std_id *id, __u16 int_freq, int scode)
{
- struct xc2028_data *priv = fe->tuner_priv;
- int rc, version;
- v4l2_std_id std0 = 0;
- unsigned int type0 = 0, type = 0;
- int change_digital_bandwidth;
+ struct xc2028_data *priv = fe->tuner_priv;
+ int pos, rc;
+ unsigned char *p;
+
+ tuner_dbg("%s called\n", __FUNCTION__);
+
+ if (!int_freq) {
+ pos = seek_firmware(fe, type, id);
+ if (pos < 0)
+ return pos;
+ } else {
+ for (pos = 0; pos < priv->firm_size; pos++) {
+ if ((priv->firm[pos].int_freq == int_freq) &&
+ (priv->firm[pos].type & HAS_IF))
+ break;
+ }
+ if (pos == priv->firm_size)
+ return -ENOENT;
+ }
- tuner_info("%s called\n", __FUNCTION__);
+ p = priv->firm[pos].ptr;
+
+ if (priv->firm[pos].type & HAS_IF) {
+ if (priv->firm[pos].size != 12 * 16 || scode >= 16)
+ return -EINVAL;
+ p += 12 * scode;
+ } else {
+ /* 16 SCODE entries per file; each SCODE entry is 12 bytes and
+ * has a 2-byte size header in the firmware format. */
+ if (priv->firm[pos].size != 14 * 16 || scode >= 16 ||
+ le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12)
+ return -EINVAL;
+ p += 14 * scode + 2;
+ }
+
+ tuner_info("Loading SCODE for type=");
+ dump_firm_type_and_int_freq(priv->firm[pos].type,
+ priv->firm[pos].int_freq);
+ printk("(%x), id %016llx.\n", priv->firm[pos].type,
+ (unsigned long long)*id);
+
+ if (priv->firm_version < 0x0202)
+ rc = send_seq(priv, {0x20, 0x00, 0x00, 0x00});
+ else
+ rc = send_seq(priv, {0xa0, 0x00, 0x00, 0x00});
+ if (rc < 0)
+ return -EIO;
+
+ rc = i2c_send(priv, p, 12);
+ if (rc < 0)
+ return -EIO;
+
+ rc = send_seq(priv, {0x00, 0x8c});
+ if (rc < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int check_firmware(struct dvb_frontend *fe, unsigned int type,
+ v4l2_std_id std, __u16 int_freq)
+{
+ struct xc2028_data *priv = fe->tuner_priv;
+ struct firmware_properties new_fw;
+ int rc = 0, is_retry = 0;
+ u16 version, hwmodel;
+ v4l2_std_id std0;
+
+ tuner_dbg("%s called\n", __FUNCTION__);
if (!priv->firm) {
- if (!priv->ctrl.fname)
+ if (!priv->ctrl.fname) {
+ tuner_info("xc2028/3028 firmware name not set!\n");
return -EINVAL;
+ }
rc = load_all_firmwares(fe);
if (rc < 0)
return rc;
}
- tuner_info("I am in mode %u and I should switch to mode %i\n",
- priv->mode, new_mode);
+ if (priv->ctrl.mts && !(type & FM))
+ type |= MTS;
- /* first of all, determine whether we have switched the mode */
- if (new_mode != priv->mode) {
- priv->mode = new_mode;
- priv->need_load_generic = 1;
+retry:
+ new_fw.type = type;
+ new_fw.id = std;
+ new_fw.std_req = std;
+ new_fw.scode_table = SCODE | priv->ctrl.scode_table;
+ new_fw.scode_nr = 0;
+ new_fw.int_freq = int_freq;
+
+ tuner_dbg("checking firmware, user requested type=");
+ if (debug) {
+ dump_firm_type(new_fw.type);
+ printk("(%x), id %016llx, ", new_fw.type,
+ (unsigned long long)new_fw.std_req);
+ if (!int_freq) {
+ printk("scode_tbl ");
+ dump_firm_type(priv->ctrl.scode_table);
+ printk("(%x), ", priv->ctrl.scode_table);
+ } else
+ printk("int_freq %d, ", new_fw.int_freq);
+ printk("scode_nr %d\n", new_fw.scode_nr);
}
- change_digital_bandwidth = (priv->mode == T_DIGITAL_TV
- && bandwidth != priv->bandwidth) ? 1 : 0;
- tuner_info("old bandwidth %u, new bandwidth %u\n", priv->bandwidth,
- bandwidth);
-
- if (priv->need_load_generic) {
- /* Reset is needed before loading firmware */
- rc = priv->tuner_callback(priv->video_dev,
- XC2028_TUNER_RESET, 0);
- if (rc < 0)
- return rc;
-
- type0 = BASE;
-
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type0 |= MTS;
+ /* No need to reload base firmware if it matches */
+ if (((BASE | new_fw.type) & BASE_TYPES) ==
+ (priv->cur_fw.type & BASE_TYPES)) {
+ tuner_dbg("BASE firmware not changed.\n");
+ goto skip_base;
+ }
- if (priv->bandwidth == 8)
- type0 |= F8MHZ;
+ /* Updating BASE - forget about all currently loaded firmware */
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
- /* FIXME: How to load FM and FM|INPUT1 firmwares? */
+ /* Reset is needed before loading firmware */
+ rc = priv->tuner_callback(priv->video_dev,
+ XC2028_TUNER_RESET, 0);
+ if (rc < 0)
+ goto fail;
- rc = load_firmware(fe, type0, &std0);
- if (rc < 0) {
- tuner_info("Error %d while loading generic firmware\n",
- rc);
- return rc;
- }
+ /* BASE firmwares are all std0 */
+ std0 = 0;
+ rc = load_firmware(fe, BASE | new_fw.type, &std0);
+ if (rc < 0) {
+ tuner_err("Error %d while loading base firmware\n",
+ rc);
+ goto fail;
+ }
- priv->need_load_generic = 0;
- priv->firm_type = 0;
- if (priv->mode == T_DIGITAL_TV)
- change_digital_bandwidth = 1;
+ /* Load INIT1, if needed */
+ tuner_dbg("Load init1 firmware, if exists\n");
+
+ rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &std0);
+ if (rc == -ENOENT)
+ rc = load_firmware(fe, (BASE | INIT1 | new_fw.type) & ~F8MHZ,
+ &std0);
+ if (rc < 0 && rc != -ENOENT) {
+ tuner_err("Error %d while loading init1 firmware\n",
+ rc);
+ goto fail;
}
- tuner_info("I should change bandwidth %u\n", change_digital_bandwidth);
+skip_base:
+ /*
+ * No need to reload standard specific firmware if base firmware
+ * was not reloaded and requested video standards have not changed.
+ */
+ if (priv->cur_fw.type == (BASE | new_fw.type) &&
+ priv->cur_fw.std_req == std) {
+ tuner_dbg("Std-specific firmware already loaded.\n");
+ goto skip_std_specific;
+ }
- if (change_digital_bandwidth) {
+ /* Reloading std-specific firmware forces a SCODE update */
+ priv->cur_fw.scode_table = 0;
- /*FIXME: Should allow selecting between D2620 and D2633 */
- type |= D2620;
+ rc = load_firmware(fe, new_fw.type, &new_fw.id);
+ if (rc == -ENOENT)
+ rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id);
- /* FIXME: When should select a DTV78 firmware?
- */
- switch (bandwidth) {
- case BANDWIDTH_8_MHZ:
- type |= DTV8;
- break;
- case BANDWIDTH_7_MHZ:
- type |= DTV7;
- break;
- case BANDWIDTH_6_MHZ:
- /* FIXME: Should allow select also ATSC */
- type |= DTV6_QAM;
- break;
+ if (rc < 0)
+ goto fail;
- default:
- tuner_info("error: bandwidth not supported.\n");
- };
- priv->bandwidth = bandwidth;
+skip_std_specific:
+ if (priv->cur_fw.scode_table == new_fw.scode_table &&
+ priv->cur_fw.scode_nr == new_fw.scode_nr) {
+ tuner_dbg("SCODE firmware already loaded.\n");
+ goto check_device;
}
- /* Load INIT1, if needed */
- tuner_info("Trying to load init1 firmware\n");
- type0 = BASE | INIT1 | priv->ctrl.type;
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type0 |= MTS;
+ /* Load SCODE firmware, if exists */
+ tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr);
- /* FIXME: Should handle errors - if INIT1 found */
- rc = load_firmware(fe, type0, &std0);
+ rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
+ new_fw.int_freq, new_fw.scode_nr);
- /* FIXME: Should add support for FM radio
- */
+check_device:
+ if (xc2028_get_reg(priv, 0x0004, &version) < 0 ||
+ xc2028_get_reg(priv, 0x0008, &hwmodel) < 0) {
+ tuner_err("Unable to read tuner registers.\n");
+ goto fail;
+ }
- if (priv->ctrl.type == XC2028_FIRM_MTS)
- type |= MTS;
+ tuner_info("Device is Xceive %d version %d.%d, "
+ "firmware version %d.%d\n",
+ hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8,
+ (version & 0xf0) >> 4, version & 0xf);
- tuner_info("firmware standard to load: %08lx\n", (unsigned long)std);
- if (priv->firm_type & std) {
- tuner_info("no need to load a std-specific firmware.\n");
- return 0;
+ /* Check firmware version against what we downloaded. */
+ if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) {
+ tuner_err("Incorrect readback of firmware version.\n");
+ goto fail;
}
- rc = load_firmware(fe, type, &std);
- if (rc < 0)
- return rc;
+ /* Check that the tuner hardware model remains consistent over time. */
+ if (priv->hwmodel == 0 && (hwmodel == 2028 || hwmodel == 3028)) {
+ priv->hwmodel = hwmodel;
+ priv->hwvers = version & 0xff00;
+ } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
+ priv->hwvers != (version & 0xff00)) {
+ tuner_err("Read invalid device hardware information - tuner "
+ "hung?\n");
+ goto fail;
+ }
- version = xc2028_get_reg(priv, 0x4);
- tuner_info("Firmware version is %d.%d\n",
- (version >> 4) & 0x0f, (version) & 0x0f);
+ memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
- priv->firm_type = std;
+ /*
+ * By setting BASE in cur_fw.type only after successfully loading all
+ * firmwares, we can:
+ * 1. Identify that BASE firmware with type=0 has been loaded;
+ * 2. Tell whether BASE firmware was just changed the next time through.
+ */
+ priv->cur_fw.type |= BASE;
return 0;
+
+fail:
+ memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+ if (!is_retry) {
+ msleep(50);
+ is_retry = 1;
+ tuner_dbg("Retrying firmware load\n");
+ goto retry;
+ }
+
+ if (rc == -ENOENT)
+ rc = -EINVAL;
+ return rc;
}
static int xc2028_signal(struct dvb_frontend *fe, u16 *strength)
{
struct xc2028_data *priv = fe->tuner_priv;
- int frq_lock, signal = 0;
+ u16 frq_lock, signal = 0;
+ int rc;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
mutex_lock(&priv->lock);
- *strength = 0;
-
- frq_lock = xc2028_get_reg(priv, 0x2);
- if (frq_lock <= 0)
+ /* Sync Lock Indicator */
+ rc = xc2028_get_reg(priv, 0x0002, &frq_lock);
+ if (rc < 0 || frq_lock == 0)
goto ret;
/* Frequency is locked. Return signal quality */
- signal = xc2028_get_reg(priv, 0x40);
-
- if (signal <= 0)
- signal = frq_lock;
+ /* Get SNR of the video signal */
+ rc = xc2028_get_reg(priv, 0x0040, &signal);
+ if (rc < 0)
+ signal = -frq_lock;
ret:
mutex_unlock(&priv->lock);
*strength = signal;
- return 0;
+ return rc;
}
#define DIV 15625
-static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ ,
- enum tuner_mode new_mode,
- v4l2_std_id std, fe_bandwidth_t bandwidth)
+static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
+ enum tuner_mode new_mode,
+ unsigned int type,
+ v4l2_std_id std,
+ u16 int_freq)
{
struct xc2028_data *priv = fe->tuner_priv;
int rc = -EINVAL;
- unsigned char buf[5];
+ unsigned char buf[4];
u32 div, offset = 0;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
mutex_lock(&priv->lock);
- /* HACK: It seems that specific firmware need to be reloaded
- when freq is changed */
-
- priv->firm_type = 0;
-
- /* Reset GPIO 1 */
- rc = priv->tuner_callback(priv->video_dev, XC2028_TUNER_RESET, 0);
- if (rc < 0)
- goto ret;
-
- msleep(10);
- tuner_info("should set frequency %d kHz)\n", freq / 1000);
+ tuner_dbg("should set frequency %d kHz\n", freq / 1000);
- if (check_firmware(fe, new_mode, std, bandwidth) < 0)
+ if (check_firmware(fe, type, std, int_freq) < 0)
goto ret;
- if (new_mode == T_DIGITAL_TV)
+ /* On some cases xc2028 can disable video output, if
+ * very weak signals are received. By sending a soft
+ * reset, this is re-enabled. So, it is better to always
+ * send a soft reset before changing channels, to be sure
+ * that xc2028 will be in a safe state.
+ * Maybe this might also be needed for DTV.
+ */
+ if (new_mode == T_ANALOG_TV) {
+ rc = send_seq(priv, {0x00, 0x00});
+ } else if (priv->cur_fw.type & ATSC) {
+ offset = 1750000;
+ } else {
offset = 2750000;
+ /*
+ * We must adjust the offset by 500kHz in two cases in order
+ * to correctly center the IF output:
+ * 1) When the ZARLINK456 or DIBCOM52 tables were explicitly
+ * selected and a 7MHz channel is tuned;
+ * 2) When tuning a VHF channel with DTV78 firmware.
+ */
+ if (((priv->cur_fw.type & DTV7) &&
+ (priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) ||
+ ((priv->cur_fw.type & DTV78) && freq < 470000000))
+ offset -= 500000;
+ }
div = (freq - offset + DIV / 2) / DIV;
/* CMD= Set frequency */
-
- if (priv->version < 0x0202) {
- send_seq(priv, {0x00, 0x02, 0x00, 0x00});
- } else {
- send_seq(priv, {0x80, 0x02, 0x00, 0x00});
- }
+ if (priv->firm_version < 0x0202)
+ rc = send_seq(priv, {0x00, 0x02, 0x00, 0x00});
+ else
+ rc = send_seq(priv, {0x80, 0x02, 0x00, 0x00});
+ if (rc < 0)
+ goto ret;
rc = priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1);
if (rc < 0)
buf[1] = 0xff & (div >> 16);
buf[2] = 0xff & (div >> 8);
buf[3] = 0xff & (div);
- buf[4] = 0;
- i2c_send(rc, priv, buf, sizeof(buf));
+ rc = i2c_send(priv, buf, sizeof(buf));
if (rc < 0)
goto ret;
msleep(100);
priv->frequency = freq;
- printk("divider= %02x %02x %02x %02x (freq=%d.%02d)\n",
- buf[1], buf[2], buf[3], buf[4],
- freq / 1000000, (freq % 1000000) / 10000);
+ tuner_dbg("divisor= %02x %02x %02x %02x (freq=%d.%03d)\n",
+ buf[0], buf[1], buf[2], buf[3],
+ freq / 1000000, (freq % 1000000) / 1000);
rc = 0;
return rc;
}
-static int xc2028_set_tv_freq(struct dvb_frontend *fe,
+static int xc2028_set_analog_freq(struct dvb_frontend *fe,
struct analog_parameters *p)
{
struct xc2028_data *priv = fe->tuner_priv;
+ unsigned int type=0;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
- return generic_set_tv_freq(fe, 62500l * p->frequency, T_ANALOG_TV,
- p->std, BANDWIDTH_8_MHZ /* NOT USED */);
+ if (p->mode == V4L2_TUNER_RADIO) {
+ type |= FM;
+ if (priv->ctrl.input1)
+ type |= INPUT1;
+ return generic_set_freq(fe, (625l * p->frequency) / 10,
+ T_ANALOG_TV, type, 0, 0);
+ }
+
+ /* if std is not defined, choose one */
+ if (!p->std)
+ p->std = V4L2_STD_MN;
+
+ /* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */
+ if (!(p->std & V4L2_STD_MN))
+ type |= F8MHZ;
+
+ /* Add audio hack to std mask */
+ p->std |= parse_audio_std_option();
+
+ return generic_set_freq(fe, 62500l * p->frequency,
+ T_ANALOG_TV, type, p->std, 0);
}
static int xc2028_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
struct xc2028_data *priv = fe->tuner_priv;
+ unsigned int type=0;
+ fe_bandwidth_t bw = BANDWIDTH_8_MHZ;
+ u16 demod = 0;
+
+ tuner_dbg("%s called\n", __FUNCTION__);
- tuner_info("%s called\n", __FUNCTION__);
+ if (priv->ctrl.d2633)
+ type |= D2633;
+ else
+ type |= D2620;
- /* FIXME: Only OFDM implemented */
- if (fe->ops.info.type != FE_OFDM) {
- tuner_info("DTV type not implemented.\n");
+ switch(fe->ops.info.type) {
+ case FE_OFDM:
+ bw = p->u.ofdm.bandwidth;
+ break;
+ case FE_QAM:
+ tuner_info("WARN: There are some reports that "
+ "QAM 6 MHz doesn't work.\n"
+ "If this works for you, please report by "
+ "e-mail to: v4l-dvb-maintainer@linuxtv.org\n");
+ bw = BANDWIDTH_6_MHZ;
+ type |= QAM;
+ break;
+ case FE_ATSC:
+ bw = BANDWIDTH_6_MHZ;
+ /* The only ATSC firmware (at least on v2.7) is D2633,
+ so overrides ctrl->d2633 */
+ type |= ATSC| D2633;
+ type &= ~D2620;
+ break;
+ /* DVB-S is not supported */
+ default:
return -EINVAL;
}
- return generic_set_tv_freq(fe, p->frequency, T_DIGITAL_TV,
- 0 /* NOT USED */,
- p->u.ofdm.bandwidth);
+ switch (bw) {
+ case BANDWIDTH_8_MHZ:
+ if (p->frequency < 470000000)
+ priv->ctrl.vhfbw7 = 0;
+ else
+ priv->ctrl.uhfbw8 = 1;
+ type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV8;
+ type |= F8MHZ;
+ break;
+ case BANDWIDTH_7_MHZ:
+ if (p->frequency < 470000000)
+ priv->ctrl.vhfbw7 = 1;
+ else
+ priv->ctrl.uhfbw8 = 0;
+ type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV7;
+ type |= F8MHZ;
+ break;
+ case BANDWIDTH_6_MHZ:
+ type |= DTV6;
+ priv->ctrl.vhfbw7 = 0;
+ priv->ctrl.uhfbw8 = 0;
+ break;
+ default:
+ tuner_err("error: bandwidth not supported.\n");
+ };
+
+ /* All S-code tables need a 200kHz shift */
+ if (priv->ctrl.demod)
+ demod = priv->ctrl.demod + 200;
+
+ return generic_set_freq(fe, p->frequency,
+ T_DIGITAL_TV, type, 0, demod);
+}
+
+static int xc2028_sleep(struct dvb_frontend *fe)
+{
+ struct xc2028_data *priv = fe->tuner_priv;
+ int rc = 0;
+
+ tuner_dbg("%s called\n", __FUNCTION__);
+
+ mutex_lock(&priv->lock);
+
+ if (priv->firm_version < 0x0202)
+ rc = send_seq(priv, {0x00, 0x08, 0x00, 0x00});
+ else
+ rc = send_seq(priv, {0x80, 0x08, 0x00, 0x00});
+
+ priv->cur_fw.type = 0; /* need firmware reload */
+
+ mutex_unlock(&priv->lock);
+ return rc;
}
+
static int xc2028_dvb_release(struct dvb_frontend *fe)
{
struct xc2028_data *priv = fe->tuner_priv;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
+
+ mutex_lock(&xc2028_list_mutex);
priv->count--;
free_firmware(priv);
kfree(priv);
+ fe->tuner_priv = NULL;
}
+ mutex_unlock(&xc2028_list_mutex);
+
return 0;
}
{
struct xc2028_data *priv = fe->tuner_priv;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
*frequency = priv->frequency;
{
struct xc2028_data *priv = fe->tuner_priv;
struct xc2028_ctrl *p = priv_cfg;
+ int rc = 0;
- tuner_info("%s called\n", __FUNCTION__);
+ tuner_dbg("%s called\n", __FUNCTION__);
- priv->ctrl.type = p->type;
+ mutex_lock(&priv->lock);
- if (p->fname) {
- kfree(priv->ctrl.fname);
+ kfree(priv->ctrl.fname);
+ free_firmware(priv);
- priv->ctrl.fname = kmalloc(strlen(p->fname) + 1, GFP_KERNEL);
- if (!priv->ctrl.fname)
- return -ENOMEM;
+ memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
+ priv->ctrl.fname = NULL;
- free_firmware(priv);
- strcpy(priv->ctrl.fname, p->fname);
+ if (p->fname) {
+ priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
+ if (priv->ctrl.fname == NULL)
+ rc = -ENOMEM;
}
- if (p->max_len > 0)
- priv->max_len = p->max_len;
+ if (priv->ctrl.max_len < 9)
+ priv->ctrl.max_len = 13;
- tuner_info("%s OK\n", __FUNCTION__);
+ mutex_unlock(&priv->lock);
- return 0;
+ return rc;
}
static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = {
},
.set_config = xc2028_set_config,
- .set_analog_params = xc2028_set_tv_freq,
+ .set_analog_params = xc2028_set_analog_freq,
.release = xc2028_dvb_release,
.get_frequency = xc2028_get_frequency,
.get_rf_strength = xc2028_signal,
.set_params = xc2028_set_params,
+ .sleep = xc2028_sleep,
};
-int xc2028_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap,
- u8 i2c_addr, struct device *dev, void *video_dev,
- int (*tuner_callback) (void *dev, int command, int arg))
+struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
+ struct xc2028_config *cfg)
{
struct xc2028_data *priv;
+ void *video_dev;
- printk(KERN_INFO PREFIX "Xcv2028/3028 init called!\n");
+ if (debug)
+ printk(KERN_DEBUG PREFIX ": Xcv2028/3028 init called!\n");
- if (NULL == dev)
- return -ENODEV;
+ if (NULL == cfg || NULL == cfg->video_dev)
+ return NULL;
- if (NULL == video_dev)
- return -ENODEV;
-
- if (!tuner_callback) {
- printk(KERN_ERR PREFIX "No tuner callback!\n");
- return -EINVAL;
+ if (!fe) {
+ printk(KERN_ERR PREFIX ": No frontend!\n");
+ return NULL;
}
+ video_dev = cfg->video_dev;
+
+ mutex_lock(&xc2028_list_mutex);
+
list_for_each_entry(priv, &xc2028_list, xc2028_list) {
- if (priv->dev == dev)
- dev = NULL;
+ if (priv->video_dev == cfg->video_dev) {
+ video_dev = NULL;
+ break;
+ }
}
- if (dev) {
+ if (video_dev) {
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL)
- return -ENOMEM;
-
- fe->tuner_priv = priv;
+ if (priv == NULL) {
+ mutex_unlock(&xc2028_list_mutex);
+ return NULL;
+ }
- priv->bandwidth = BANDWIDTH_6_MHZ;
- priv->need_load_generic = 1;
- priv->mode = T_UNINITIALIZED;
- priv->i2c_props.addr = i2c_addr;
- priv->i2c_props.adap = i2c_adap;
- priv->dev = dev;
+ priv->i2c_props.addr = cfg->i2c_addr;
+ priv->i2c_props.adap = cfg->i2c_adap;
priv->video_dev = video_dev;
- priv->tuner_callback = tuner_callback;
- priv->max_len = 13;
-
+ priv->tuner_callback = cfg->callback;
+ priv->ctrl.max_len = 13;
mutex_init(&priv->lock);
list_add_tail(&priv->xc2028_list, &xc2028_list);
}
+
+ fe->tuner_priv = priv;
priv->count++;
memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
tuner_info("type set to %s\n", "XCeive xc2028/xc3028 tuner");
- return 0;
+ if (cfg->ctrl)
+ xc2028_set_config(fe, cfg->ctrl);
+
+ mutex_unlock(&xc2028_list_mutex);
+
+ return fe;
}
+
EXPORT_SYMBOL(xc2028_attach);
MODULE_DESCRIPTION("Xceive xc2028/xc3028 tuner driver");