#include "videocodec.h"
#include "zoran.h"
#include "zoran_device.h"
+#include "zoran_card.h"
#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
ZR36057_ISR_GIRQ1 | \
extern const struct zoran_format zoran_formats[];
-extern int *zr_debug;
-
-#define dprintk(num, format, args...) \
- do { \
- if (*zr_debug >= num) \
- printk(format, ##args); \
- } while (0)
-
-static int lml33dpath = 0; /* 1 will use digital path in capture
+static int lml33dpath; /* default = 0
+ * 1 will use digital path in capture
* mode instead of analog. It can be
* used for picture adjustments using
* tool like xawtv while watching image
* load on Bt819 input, there will be
* some image imperfections */
-module_param(lml33dpath, bool, 0);
+module_param(lml33dpath, bool, 0644);
MODULE_PARM_DESC(lml33dpath,
"Use digital path capture mode (on LML33 cards)");
static void
dump_guests (struct zoran *zr)
{
- if (*zr_debug > 2) {
+ if (zr36067_debug > 2) {
int i, guest[8];
for (i = 1; i < 8; i++) { // Don't read jpeg codec here
jpeg_codec_sleep (struct zoran *zr,
int sleep)
{
- GPIO(zr, zr->card.gpio[GPIO_JPEG_SLEEP], !sleep);
+ GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep);
if (!sleep) {
dprintk(3,
KERN_DEBUG
0);
udelay(2);
} else {
- GPIO(zr, zr->card.gpio[GPIO_JPEG_RESET], 0);
+ GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0);
udelay(2);
- GPIO(zr, zr->card.gpio[GPIO_JPEG_RESET], 1);
+ GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1);
udelay(2);
}
set_frame (struct zoran *zr,
int val)
{
- GPIO(zr, zr->card.gpio[GPIO_JPEG_FRAME], val);
+ GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val);
}
static void
GPIO(zr, 5, 1);
break;
default:
- GPIO(zr, zr->card.gpio[GPIO_VID_DIR],
- zr->card.gpio_pol[GPIO_VID_DIR] ? !val : val);
+ GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR],
+ zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val);
break;
}
}
return isr;
}
-/* hack */
-extern void zr36016_write (struct videocodec *codec,
- u16 reg,
- u32 val);
-
void
jpeg_start (struct zoran *zr)
{
zr36057_enable_jpg (struct zoran *zr,
enum zoran_codec_mode mode)
{
- static int zero = 0;
+ static int zero;
static int one = 1;
struct vfe_settings cap;
int field_size =
zr->num_errors++;
/* Report error */
- if (*zr_debug > 1 && zr->num_errors <= 8) {
+ if (zr36067_debug > 1 && zr->num_errors <= 8) {
long frame;
frame =
zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
- if (*zr_debug > 1 &&
+ if (zr36067_debug > 1 &&
(!zr->frame_num || zr->JPEG_error)) {
printk(KERN_INFO
"%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
zr->JPEG_missed;
}
- if (*zr_debug > 2 && zr->frame_num < 6) {
+ if (zr36067_debug > 2 && zr->frame_num < 6) {
int i;
printk("%s: seq=%ld stat_com:",
ZR_DEVNAME(zr), zr->jpg_seq_num);
return -EIO;
if (zr->card.type == LML33 &&
- (cmd == DECODER_SET_NORM || DECODER_SET_INPUT)) {
+ (cmd == DECODER_SET_NORM || cmd == DECODER_SET_INPUT)) {
int res;
// Bt819 needs to reset its FIFO buffer using #FRST pin and