* deficiencies
*
*/
-#include <linux/config.h>
#ifdef CONFIG_MMC_DEBUG
#define DEBUG
int dma_allocated;
unsigned char actual_bus_width;
+
+ int prev_cmd_code;
};
#define IMXMCI_PEND_IRQ_b 0
if(!loops)
return 0;
- dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
- loops, where, *pstat, stat_mask);
+ /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+ if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
return loops;
}
static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
- unsigned int blksz = 1 << data->blksz_bits;
+ unsigned int blksz = data->blksz;
unsigned int datasz = nob * blksz;
int i;
* partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
* This is required for SCR read at least.
*/
- if (datasz < 64) {
+ if (datasz < 512) {
host->dma_size = datasz;
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
/* Hack to enable read SCR */
- if(datasz < 16) {
- MMC_NOB = 1;
- MMC_BLK_LEN = 16;
- }
+ MMC_NOB = 1;
+ MMC_BLK_LEN = 512;
} else {
host->dma_dir = DMA_TO_DEVICE;
}
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
+ /* Ensure, that clock are stopped else command programming and start fails */
+ imxmci_stop_clock(host);
+
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMD_DAT_CONT_BUSY;
case MMC_RSP_R3: /* short */
cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
break;
- case MMC_RSP_R6: /* short CRC */
- cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R6;
- break;
default:
break;
}
spin_unlock_irqrestore(&host->lock, flags);
+ if(req && req->cmd)
+ host->prev_cmd_code = req->cmd->opcode;
+
host->req = NULL;
host->cmd = NULL;
host->data = NULL;
{
int i;
int burst_len;
- int flush_len;
int trans_done = 0;
unsigned int stat = *pstat;
- if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ if(host->actual_bus_width != MMC_BUS_WIDTH_4)
burst_len = 16;
else
burst_len = 64;
dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
stat);
+ udelay(20); /* required for clocks < 8MHz*/
+
if(host->dma_dir == DMA_FROM_DEVICE) {
imxmci_busy_wait_for_status(host, &stat,
STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
- 20, "imxmci_cpu_driven_data read");
+ 50, "imxmci_cpu_driven_data read");
while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) &&
- (host->data_cnt < host->dma_size)) {
- if(burst_len >= host->dma_size - host->data_cnt) {
- flush_len = burst_len;
- burst_len = host->dma_size - host->data_cnt;
- flush_len -= burst_len;
- host->data_cnt = host->dma_size;
- trans_done = 1;
- } else {
- flush_len = 0;
- host->data_cnt += burst_len;
- }
+ (host->data_cnt < 512)) {
+
+ udelay(20); /* required for clocks < 8MHz*/
for(i = burst_len; i>=2 ; i-=2) {
- *(host->data_ptr++) = MMC_BUFFER_ACCESS;
- udelay(20); /* required for clocks < 8MHz*/
+ u16 data;
+ data = MMC_BUFFER_ACCESS;
+ udelay(10); /* required for clocks < 8MHz*/
+ if(host->data_cnt+2 <= host->dma_size) {
+ *(host->data_ptr++) = data;
+ } else {
+ if(host->data_cnt < host->dma_size)
+ *(u8*)(host->data_ptr) = data;
+ }
+ host->data_cnt += 2;
}
- if(i == 1)
- *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
-
stat = MMC_STATUS;
- /* Flush extra bytes from FIFO */
- while(flush_len >= 2){
- flush_len -= 2;
- i = MMC_BUFFER_ACCESS;
- stat = MMC_STATUS;
- stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
- }
-
- dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
- burst_len, stat);
+ dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
+ host->data_cnt, burst_len, stat);
}
+
+ if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
+ trans_done = 1;
+
+ if(host->dma_size & 0x1ff)
+ stat &= ~STATUS_CRC_READ_ERR;
+
} else {
imxmci_busy_wait_for_status(host, &stat,
STATUS_APPL_BUFF_FE,
return trans_done;
}
-static void imxmci_dma_irq(int dma, void *devid, struct pt_regs *regs)
+static void imxmci_dma_irq(int dma, void *devid)
{
struct imxmci_host *host = devid;
uint32_t stat = MMC_STATUS;
tasklet_schedule(&host->tasklet);
}
-static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
+static irqreturn_t imxmci_irq(int irq, void *devid)
{
struct imxmci_host *host = devid;
uint32_t stat = MMC_STATUS;
what, stat, MMC_INT_MASK);
dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
- dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
- host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
+ dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
+ host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
}
if(!host->present || timeout)
data_dir_mask = STATUS_DATA_TRANS_DONE;
}
- imxmci_busy_wait_for_status(host, &stat,
- data_dir_mask,
- 50, "imxmci_tasklet_fnc data");
-
if(stat & data_dir_mask) {
clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
imxmci_data_done(host, stat);
imxmci_stop_clock(host);
MMC_CLK_RATE = (prescaler<<3) | clk;
- imxmci_start_clock(host);
+ /*
+ * Under my understanding, clock should not be started there, because it would
+ * initiate SDHC sequencer and send last or random command into card
+ */
+ /*imxmci_start_clock(host);*/
dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
} else {
}
}
-static struct mmc_host_ops imxmci_ops = {
+static const struct mmc_host_ops imxmci_ops = {
.request = imxmci_request,
.set_ios = imxmci_set_ios,
};
mmc->f_min = 150000;
mmc->f_max = CLK_RATE/2;
mmc->ocr_avail = MMC_VDD_32_33;
- mmc->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_BYTEBLOCK;
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
mmc->max_phys_segs = 64;
- mmc->max_sectors = 64; /* default 1 << (PAGE_CACHE_SHIFT - 9) */
mmc->max_seg_size = 64*512; /* default PAGE_CACHE_SIZE */
+ mmc->max_req_size = 64*512; /* default PAGE_CACHE_SIZE */
+ mmc->max_blk_size = 2048;
+ mmc->max_blk_count = 65535;
host = mmc_priv(mmc);
host->mmc = mmc;