# drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
menu "Mapping drivers for chip access"
depends on MTD!=n
particular board as well as the bus width, either statically
with config options or at run-time.
+ To compile this driver as a module, choose M here: the
+ module will be called physmap.
+
config MTD_PHYSMAP_START
hex "Physical start address of flash mapping"
depends on MTD_PHYSMAP
help
This is the total width of the data bus of the flash devices
in octets. For example, if you have a data bus width of 32
- bits, you would set the bus width octect value to 4. This is
+ bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
depends on PMC_MSP && MTD_CFI
select MTD_PARTITIONS
help
- This provides a 'mapping' driver which support the way
- in which user-programmable flash chips are connected on the
- PMC-Sierra MSP eval/demo boards
+ This provides a 'mapping' driver which supports the way
+ in which user-programmable flash chips are connected on the
+ PMC-Sierra MSP eval/demo boards.
choice
- prompt "Maximum mappable memory avialable for flash IO"
+ prompt "Maximum mappable memory available for flash IO"
depends on MTD_PMC_MSP_EVM
default MSP_FLASH_MAP_LIMIT_32M
Sun Microsystems boardsets. This driver will require CFI support
in the kernel, so if you did not enable CFI previously, do that now.
-config MTD_PNC2000
- tristate "CFI Flash device mapped on Photron PNC-2000"
- depends on X86 && MTD_CFI && MTD_PARTITIONS
- help
- PNC-2000 is the name of Network Camera product from PHOTRON
- Ltd. in Japan. It uses CFI-compliant flash.
-
config MTD_SC520CDP
tristate "CFI Flash device mapped on AMD SC520 CDP"
depends on X86 && MTD_CFI && MTD_CONCAT
More info at
<http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
-config MTD_LUBBOCK
- tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
- depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
- help
- This provides a driver for the on-board flash of the Intel
- 'Lubbock' XScale evaluation board.
-
-config MTD_MAINSTONE
- tristate "CFI Flash device mapped on Intel Mainstone XScale eval board"
- depends on MACH_MAINSTONE && MTD_CFI_INTELEXT
+config MTD_PXA2XX
+ tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards"
+ depends on (PXA25x || PXA27x) && MTD_CFI_INTELEXT
select MTD_PARTITIONS
help
- This provides a driver for the on-board flash of the Intel
- 'Mainstone PXA27x evaluation board.
+ This provides a driver for the NOR flash attached to a PXA2xx chip.
config MTD_OCTAGON
tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-config MTD_MTX1
- tristate "4G Systems MTX-1 Flash device"
- depends on MIPS_MTX1 && MTD_CFI
- help
- Flash memory access on 4G Systems MTX-1 Board. If you have one of
- these boards and would like to use the flash chips on it, say 'Y'.
-
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
config MTD_EBONY
tristate "Flash devices mapped on IBM 440GP Ebony"
- depends on MTD_JEDECPROBE && EBONY
+ depends on MTD_JEDECPROBE && EBONY && !PPC_MERGE
help
This enables access routines for the flash chips on the IBM 440GP
Ebony board. If you have one of these boards and would like to
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
- depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+ depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
help
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
-config MTD_MPC1211
- tristate "CFI Flash device mapped on Interface MPC-1211"
- depends on SH_MPC1211 && MTD_CFI
- help
- This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
- If you have such a board, say 'Y'.
-
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
If unsure, say N.
+config MTD_BFIN_ASYNC
+ tristate "Blackfin BF533-STAMP Flash Chip Support"
+ depends on BFIN533_STAMP && MTD_CFI
+ select MTD_PARTITIONS
+ default y
+ help
+ Map driver which allows for simultaneous utilization of
+ ethernet and CFI parallel flash.
+
+ If compiled as a module, it will be called bfin-async-flash.
+
config MTD_UCLINUX
tristate "Generic uClinux RAM/ROM filesystem support"
depends on MTD_PARTITIONS && !MMU
help
Map driver for Dy-4 SVME/DMV-182 board.
-config MTD_BAST
- tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
- depends on ARCH_BAST || MACH_VR1000
- select MTD_PARTITIONS
- select MTD_MAP_BANK_WIDTH_16
- select MTD_JEDECPROBE
- help
- Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
- Thorcom VR1000
-
- Note, this driver *cannot* over-ride the WP link on the
- board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
- int "Maximum size for BAST flash area (MiB)"
- depends on MTD_BAST
- default "4"
-
config MTD_SHARP_SL
- bool "ROM mapped on Sharp SL Series"
+ tristate "ROM mapped on Sharp SL Series"
depends on ARCH_PXA
help
This enables access to the flash chip on the Sharp SL Series of PDAs.
+config MTD_INTEL_VR_NOR
+ tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0"
+ depends on PCI
+ help
+ Map driver for a NOR flash bank located on the Expansion Bus of the
+ Intel Vermilion Range chipset.
+
config MTD_PLATRAM
tristate "Map driver for platform device RAM (mtd-ram)"
select MTD_RAM