Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

[linux-2.6-omap-h63xx.git] / drivers / mtd / nand / nand_base.c

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7acb1a0e7409fbf950a06e97f8e58b3a1be38559..d1129bae6c27d20731ef0ead6b86a863e590e7f4 100644 (file)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -797,6 +797,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
        return 0;
 }
 
+/**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:       mtd info structure
+ * @chip:      nand chip info structure
+ * @dataofs    offset of requested data within the page
+ * @readlen    data length
+ * @buf:       buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+       int start_step, end_step, num_steps;
+       uint32_t *eccpos = chip->ecc.layout->eccpos;
+       uint8_t *p;
+       int data_col_addr, i, gaps = 0;
+       int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+       int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+       /* Column address wihin the page aligned to ECC size (256bytes). */
+       start_step = data_offs / chip->ecc.size;
+       end_step = (data_offs + readlen - 1) / chip->ecc.size;
+       num_steps = end_step - start_step + 1;
+
+       /* Data size aligned to ECC ecc.size*/
+       datafrag_len = num_steps * chip->ecc.size;
+       eccfrag_len = num_steps * chip->ecc.bytes;
+
+       data_col_addr = start_step * chip->ecc.size;
+       /* If we read not a page aligned data */
+       if (data_col_addr != 0)
+               chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+       p = bufpoi + data_col_addr;
+       chip->read_buf(mtd, p, datafrag_len);
+
+       /* Calculate  ECC */
+       for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+               chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+       /* The performance is faster if to position offsets
+          according to ecc.pos. Let make sure here that
+          there are no gaps in ecc positions */
+       for (i = 0; i < eccfrag_len - 1; i++) {
+               if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+                       eccpos[i + start_step * chip->ecc.bytes + 1]) {
+                       gaps = 1;
+                       break;
+               }
+       }
+       if (gaps) {
+               chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+               chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+       } else {
+               /* send the command to read the particular ecc bytes */
+               /* take care about buswidth alignment in read_buf */
+               aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+               aligned_len = eccfrag_len;
+               if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+                       aligned_len++;
+               if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+                       aligned_len++;
+
+               chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+               chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+       }
+
+       for (i = 0; i < eccfrag_len; i++)
+               chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+       p = bufpoi + data_col_addr;
+       for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+               int stat;
+
+               stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+               if (stat == -1)
+                       mtd->ecc_stats.failed++;
+               else
+                       mtd->ecc_stats.corrected += stat;
+       }
+       return 0;
+}
+
 /**
  * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
  * @mtd:       mtd info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
                        /* Now read the page into the buffer */
                        if (unlikely(ops->mode == MTD_OOB_RAW))
                                ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+                       else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+                               ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
                        else
                                ret = chip->ecc.read_page(mtd, chip, bufpoi);
                        if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
                        /* Transfer not aligned data */
                        if (!aligned) {
-                               chip->pagebuf = realpage;
+                               if (!NAND_SUBPAGE_READ(chip) && !oob)
+                                       chip->pagebuf = realpage;
                                memcpy(buf, chip->buffers->databuf + col, bytes);
                        }
 
@@ -2229,6 +2313,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 {
        struct nand_flash_dev *type = NULL;
        int i, dev_id, maf_idx;
+       int tmp_id, tmp_manf;
 
        /* Select the device */
        chip->select_chip(mtd, 0);
@@ -2240,6 +2325,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
        *maf_id = chip->read_byte(mtd);
        dev_id = chip->read_byte(mtd);
 
+       /* Try again to make sure, as some systems the bus-hold or other
+        * interface concerns can cause random data which looks like a
+        * possibly credible NAND flash to appear. If the two results do
+        * not match, ignore the device completely.
+        */
+
+       chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+       /* Read manufacturer and device IDs */
+
+       tmp_manf = chip->read_byte(mtd);
+       tmp_id = chip->read_byte(mtd);
+
+       if (tmp_manf != *maf_id || tmp_id != dev_id) {
+               printk(KERN_INFO "%s: second ID read did not match "
+                      "%02x,%02x against %02x,%02x\n", __func__,
+                      *maf_id, dev_id, tmp_manf, tmp_id);
+               return ERR_PTR(-ENODEV);
+       }
+
        /* Lookup the flash id */
        for (i = 0; nand_flash_ids[i].name != NULL; i++) {
                if (dev_id == nand_flash_ids[i].id) {
@@ -2500,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
                chip->ecc.calculate = nand_calculate_ecc;
                chip->ecc.correct = nand_correct_data;
                chip->ecc.read_page = nand_read_page_swecc;
+               chip->ecc.read_subpage = nand_read_subpage;
                chip->ecc.write_page = nand_write_page_swecc;
                chip->ecc.read_oob = nand_read_oob_std;
                chip->ecc.write_oob = nand_write_oob_std;