enum Window3 { /* Window 3: MAC/config bits. */
Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
};
-union wn3_config {
- int i;
- struct w3_config_fields {
- unsigned int ram_size:3, ram_width:1, ram_speed:2, rom_size:2;
- int pad8:8;
- unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1, autoselect:1;
- int pad24:7;
- } u;
+enum wn3_config {
+ Ram_size = 7,
+ Ram_width = 8,
+ Ram_speed = 0x30,
+ Rom_size = 0xc0,
+ Ram_split_shift = 16,
+ Ram_split = 3 << Ram_split_shift,
+ Xcvr_shift = 20,
+ Xcvr = 7 << Xcvr_shift,
+ Autoselect = 0x1000000,
};
enum Window4 {
static int corkscrew_rx(struct net_device *dev);
static void corkscrew_timeout(struct net_device *dev);
static int boomerang_rx(struct net_device *dev);
-static irqreturn_t corkscrew_interrupt(int irq, void *dev_id,
- struct pt_regs *regs);
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id);
static int corkscrew_close(struct net_device *dev);
static void update_stats(int addr, struct net_device *dev);
static struct net_device_stats *corkscrew_get_stats(struct net_device *dev);
netdev_boot_setup_check(dev);
}
- SET_MODULE_OWNER(dev);
-
#ifdef __ISAPNP__
if(nopnp == 1)
goto no_pnp;
unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
int i;
int irq;
+ DECLARE_MAC_BUF(mac);
if (idev) {
irq = pnp_irq(idev, 0);
/* Read the station address from the EEPROM. */
EL3WINDOW(0);
for (i = 0; i < 0x18; i++) {
- short *phys_addr = (short *) dev->dev_addr;
+ __be16 *phys_addr = (__be16 *) dev->dev_addr;
int timer;
outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
/* Pause for at least 162 us. for the read to take place. */
checksum = (checksum ^ (checksum >> 8)) & 0xff;
if (checksum != 0x00)
printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
- for (i = 0; i < 6; i++)
- printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(" %s", print_mac(mac, dev->dev_addr));
if (eeprom[16] == 0x11c7) { /* Corkscrew */
if (request_dma(dev->dma, "3c515")) {
printk(", DMA %d allocation failed", dev->dma);
{
char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
- union wn3_config config;
+ __u32 config;
EL3WINDOW(3);
vp->available_media = inw(ioaddr + Wn3_Options);
- config.i = inl(ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
if (corkscrew_debug > 1)
printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n",
- config.i, inw(ioaddr + Wn3_Options));
+ config, inw(ioaddr + Wn3_Options));
printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
- 8 << config.u.ram_size,
- config.u.ram_width ? "word" : "byte",
- ram_split[config.u.ram_split],
- config.u.autoselect ? "autoselect/" : "",
- media_tbl[config.u.xcvr].name);
- dev->if_port = config.u.xcvr;
- vp->default_media = config.u.xcvr;
- vp->autoselect = config.u.autoselect;
+ 8 << config & Ram_size,
+ config & Ram_width ? "word" : "byte",
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect/" : "",
+ media_tbl[(config & Xcvr) >> Xcvr_shift].name);
+ vp->default_media = (config & Xcvr) >> Xcvr_shift;
+ vp->autoselect = config & Autoselect ? 1 : 0;
+ dev->if_port = vp->default_media;
}
if (vp->media_override != 7) {
printk(KERN_INFO " Media override to transceiver type %d (%s).\n",
{
int ioaddr = dev->base_addr;
struct corkscrew_private *vp = netdev_priv(dev);
- union wn3_config config;
+ __u32 config;
int i;
/* Before initializing select the active media port. */
EL3WINDOW(3);
if (vp->full_duplex)
outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
- config.i = inl(ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
if (vp->media_override != 7) {
if (corkscrew_debug > 1)
} else
dev->if_port = vp->default_media;
- config.u.xcvr = dev->if_port;
- outl(config.i, ioaddr + Wn3_Config);
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
if (corkscrew_debug > 1) {
printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
- dev->name, config.i);
+ dev->name, config);
}
outw(TxReset, ioaddr + EL3_CMD);
ok = 1;
}
if (!ok) {
- union wn3_config config;
+ __u32 config;
do {
dev->if_port =
ioaddr + Wn4_Media);
EL3WINDOW(3);
- config.i = inl(ioaddr + Wn3_Config);
- config.u.xcvr = dev->if_port;
- outl(config.i, ioaddr + Wn3_Config);
+ config = inl(ioaddr + Wn3_Config);
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
outw(dev->if_port == 3 ? StartCoax : StopCoax,
ioaddr + EL3_CMD);
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
-static irqreturn_t corkscrew_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
{
/* Use the now-standard shared IRQ implementation. */
struct net_device *dev = dev_id;
printk("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
- skb->dev = dev;
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
/* 'skb_put()' points to the start of sk_buff data area. */
insl(ioaddr + RX_FIFO,
copying to a properly sized skbuff. */
if (pkt_len < rx_copybreak
&& (skb = dev_alloc_skb(pkt_len + 4)) != 0) {
- skb->dev = dev;
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
/* 'skb_put()' points to the start of sk_buff data area. */
memcpy(skb_put(skb, pkt_len),
projects / linux-2.6-omap-h63xx.git / blobdiff