#define DRV_VERSION "0.9.27"
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
/* dev and priv zeroed in alloc_etherdev */
dev = alloc_etherdev (sizeof (*tp));
if (dev == NULL) {
- printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev));
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
return -ENOMEM;
}
SET_MODULE_OWNER(dev);
#ifdef USE_IO_OPS
/* make sure PCI base addr 0 is PIO */
if (!(pio_flags & IORESOURCE_IO)) {
- printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
/* check for weird/broken PCI region reporting */
if (pio_len < RTL_MIN_IO_SIZE) {
- printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
rc = -ENODEV;
goto err_out;
}
#else
/* make sure PCI base addr 1 is MMIO */
if (!(mmio_flags & IORESOURCE_MEM)) {
- printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
if (mmio_len < RTL_MIN_IO_SIZE) {
- printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
rc = -ENODEV;
goto err_out;
}
#endif
- rc = pci_request_regions (pdev, "8139too");
+ rc = pci_request_regions (pdev, DRV_NAME);
if (rc)
goto err_out;
disable_dev_on_err = 1;
#ifdef USE_IO_OPS
ioaddr = ioport_map(pio_start, pio_len);
if (!ioaddr) {
- printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
rc = -EIO;
goto err_out;
}
/* ioremap MMIO region */
ioaddr = pci_iomap(pdev, 1, 0);
if (ioaddr == NULL) {
- printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
+ dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out;
}
/* check for missing/broken hardware */
if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
- printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
rc = -EIO;
goto err_out;
}
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
- printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n",
- pci_name(pdev));
- printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig));
+ dev_printk (KERN_DEBUG, &pdev->dev,
+ "unknown chip version, assuming RTL-8139\n");
+ dev_printk (KERN_DEBUG, &pdev->dev,
+ "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
tp->chipset = 0;
match:
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
- printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
- pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
- printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n");
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+ pdev->vendor, pdev->device, pci_rev);
+ dev_info(&pdev->dev,
+ "Use the \"8139cp\" driver for improved performance and stability.\n");
}
i = rtl8139_init_board (pdev, &dev);
int retval;
void __iomem *ioaddr = tp->mmio_addr;
- retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;