ucc_geth: Remove UGETH_FILTERING dead code

[linux-2.6-omap-h63xx.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 11f143f4adf6d379682833679bb9ffa7cb99346c..adb4073ce1517227bc2dddced6b4510c5768572e 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -61,6 +61,7 @@ config DUMMY
 config BONDING
        tristate "Bonding driver support"
        depends on INET
+       depends on IPV6 || IPV6=n
        ---help---
          Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
          Channels together. This is called 'Etherchannel' by Cisco,
@@ -978,6 +979,20 @@ config SMC911X
          called smc911x.  If you want to compile it as a module, say M 
          here and read <file:Documentation/kbuild/modules.txt>
 
+config SMSC911X
+       tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+       depends on ARM || SUPERH
+       select CRC32
+       select MII
+       select PHYLIB
+       ---help---
+         Say Y here if you want support for SMSC LAN911x and LAN921x families
+         of ethernet controllers.
+
+         To compile this driver as a module, choose M here and read
+         <file:Documentation/networking/net-modules.txt>. The module
+         will be called smsc911x.
+
 config NET_VENDOR_RACAL
        bool "Racal-Interlan (Micom) NI cards"
        depends on ISA
@@ -1414,19 +1429,6 @@ config TC35815
        depends on NET_PCI && PCI && MIPS
        select PHYLIB
 
-config EEPRO100
-       tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
-       depends on NET_PCI && PCI
-       select MII
-       help
-         If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
-         card, say Y and read the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here. The module
-         will be called eepro100.
-
-
 config E100
        tristate "Intel(R) PRO/100+ support"
        depends on NET_PCI && PCI
@@ -1636,6 +1638,22 @@ config EPIC100
          More specific information and updates are available from
          <http://www.scyld.com/network/epic100.html>.
 
+config SMSC9420
+       tristate "SMSC LAN9420 PCI ethernet adapter support"
+       depends on NET_PCI && PCI
+       select CRC32
+       select PHYLIB
+       select SMSC_PHY
+       help
+         This is a driver for SMSC's LAN9420 PCI ethernet adapter.
+         Say Y if you want it compiled into the kernel,
+         and read the Ethernet-HOWTO, available from
+         <http://www.linuxdoc.org/docs.html#howto>.
+
+         This driver is also available as a module. The module will be
+         called smsc9420.  If you want to compile it as a module, say M
+         here and read <file:Documentation/kbuild/modules.txt>
+
 config SUNDANCE
        tristate "Sundance Alta support"
        depends on NET_PCI && PCI
@@ -1825,9 +1843,10 @@ config FEC2
 
 config FEC_MPC52xx
        tristate "MPC52xx FEC driver"
-       depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+       depends on PPC_MPC52xx && PPC_BESTCOMM
        select CRC32
        select PHYLIB
+       select PPC_BESTCOMM_FEC
        ---help---
          This option enables support for the MPC5200's on-chip
          Fast Ethernet Controller
@@ -1980,10 +1999,10 @@ config IP1000
          will be called ipg.  This is recommended.
 
 config IGB
-       tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support"
+       tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
        depends on PCI
        ---help---
-         This driver supports Intel(R) 82575 gigabit ethernet family of
+         This driver supports Intel(R) 82575/82576 gigabit ethernet family of
          adapters.  For more information on how to identify your adapter, go
          to the Adapter & Driver ID Guide at:
 
@@ -2275,10 +2294,6 @@ config UGETH_MAGIC_PACKET
        bool "Magic Packet detection support"
        depends on UCC_GETH
 
-config UGETH_FILTERING
-       bool "Mac address filtering support"
-       depends on UCC_GETH
-
 config UGETH_TX_ON_DEMAND
        bool "Transmit on Demand support"
        depends on UCC_GETH
@@ -2449,6 +2464,16 @@ config IXGBE_DCA
          driver.  DCA is a method for warming the CPU cache before data
          is used, with the intent of lessening the impact of cache misses.
 
+config IXGBE_DCB
+       bool "Data Center Bridging (DCB) Support"
+       default n
+       depends on IXGBE && DCB
+       ---help---
+         Say Y here if you want to use Data Center Bridging (DCB) in the
+         driver.
+
+         If unsure, say N.
+
 config IXGB
        tristate "Intel(R) PRO/10GbE support"
        depends on PCI