ACPICA: Add function to decode reference obj types to strings

[linux-2.6-omap-h63xx.git] / drivers / net / bnx2.c

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ebde67d4297451aa9019f97105f31c76f268f7f..2486a656f12d9f47ff27ead587e084a3c337a1a3 100644 (file)
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -35,8 +35,8 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
 #include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define BCM_VLAN 1
 #endif
 #include <net/ip.h>
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME                "bnx2"
 #define PFX DRV_MODULE_NAME    ": "
-#define DRV_MODULE_VERSION     "1.7.9"
-#define DRV_MODULE_RELDATE     "July 18, 2008"
+#define DRV_MODULE_VERSION     "1.8.0"
+#define DRV_MODULE_RELDATE     "Aug 14, 2008"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2876,6 +2876,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                struct sw_bd *rx_buf;
                struct sk_buff *skb;
                dma_addr_t dma_addr;
+               u16 vtag = 0;
+               int hw_vlan __maybe_unused = 0;
 
                sw_ring_cons = RX_RING_IDX(sw_cons);
                sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -2919,7 +2921,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                if (len <= bp->rx_copy_thresh) {
                        struct sk_buff *new_skb;
 
-                       new_skb = netdev_alloc_skb(bp->dev, len + 2);
+                       new_skb = netdev_alloc_skb(bp->dev, len + 6);
                        if (new_skb == NULL) {
                                bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
                                                  sw_ring_prod);
@@ -2928,9 +2930,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 
                        /* aligned copy */
                        skb_copy_from_linear_data_offset(skb,
-                                                        BNX2_RX_OFFSET - 2,
-                                     new_skb->data, len + 2);
-                       skb_reserve(new_skb, 2);
+                                                        BNX2_RX_OFFSET - 6,
+                                     new_skb->data, len + 6);
+                       skb_reserve(new_skb, 6);
                        skb_put(new_skb, len);
 
                        bnx2_reuse_rx_skb(bp, rxr, skb,
@@ -2941,6 +2943,25 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                           dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
                        goto next_rx;
 
+               if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
+                   !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
+                       vtag = rx_hdr->l2_fhdr_vlan_tag;
+#ifdef BCM_VLAN
+                       if (bp->vlgrp)
+                               hw_vlan = 1;
+                       else
+#endif
+                       {
+                               struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+                                       __skb_push(skb, 4);
+
+                               memmove(ve, skb->data + 4, ETH_ALEN * 2);
+                               ve->h_vlan_proto = htons(ETH_P_8021Q);
+                               ve->h_vlan_TCI = htons(vtag);
+                               len += 4;
+                       }
+               }
+
                skb->protocol = eth_type_trans(skb, bp->dev);
 
                if ((len > (bp->dev->mtu + ETH_HLEN)) &&
@@ -2962,10 +2983,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                }
 
 #ifdef BCM_VLAN
-               if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
-                       vlan_hwaccel_receive_skb(skb, bp->vlgrp,
-                               rx_hdr->l2_fhdr_vlan_tag);
-               }
+               if (hw_vlan)
+                       vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
                else
 #endif
                        netif_receive_skb(skb);
@@ -3237,10 +3256,10 @@ bnx2_set_rx_mode(struct net_device *dev)
                                  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
        sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
 #ifdef BCM_VLAN
-       if (!bp->vlgrp && !(bp->flags & BNX2_FLAG_ASF_ENABLE))
+       if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
                rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #else
-       if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+       if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
                rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #endif
        if (dev->flags & IFF_PROMISC) {
@@ -5963,10 +5982,12 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
                vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
        }
 
+#ifdef BCM_VLAN
        if (bp->vlgrp && vlan_tx_tag_present(skb)) {
                vlan_tag_flags |=
                        (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
        }
+#endif
        if ((mss = skb_shinfo(skb)->gso_size)) {
                u32 tcp_opt_len, ip_tcp_len;
                struct iphdr *iph;