/* bnx2.h: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
+ * Copyright (c) 2004-2007 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
u32 tx_bd_haddr_hi;
u32 tx_bd_haddr_lo;
u32 tx_bd_mss_nbytes;
+ #define TX_BD_TCP6_OFF2_SHL (14)
u32 tx_bd_vlan_tag_flags;
#define TX_BD_FLAGS_CONN_FAULT (1<<0)
+ #define TX_BD_FLAGS_TCP6_OFF0_MSK (3<<1)
+ #define TX_BD_FLAGS_TCP6_OFF0_SHL (1)
#define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1)
#define TX_BD_FLAGS_IP_CKSUM (1<<2)
#define TX_BD_FLAGS_VLAN_TAG (1<<3)
#define TX_BD_FLAGS_END (1<<6)
#define TX_BD_FLAGS_START (1<<7)
#define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8)
+ #define TX_BD_FLAGS_TCP6_OFF4_SHL (12)
#define TX_BD_FLAGS_SW_FLAGS (1<<13)
#define TX_BD_FLAGS_SW_SNAP (1<<14)
#define TX_BD_FLAGS_SW_LSO (1<<15)
#define BNX2_MISC_NEW_CORE_CTL 0x000008c8
#define BNX2_MISC_NEW_CORE_CTL_LINK_HOLDOFF_SUCCESS (1L<<0)
#define BNX2_MISC_NEW_CORE_CTL_LINK_HOLDOFF_REQ (1L<<1)
+#define BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE (1L<<16)
#define BNX2_MISC_NEW_CORE_CTL_RESERVED_CMN (0x3fffL<<2)
#define BNX2_MISC_NEW_CORE_CTL_RESERVED_TC (0xffffL<<16)
#define MII_BNX2_DSP_ADDRESS 0x17
#define MII_BNX2_DSP_EXPAND_REG 0x0f00
+#define MII_BNX2_BLK_ADDR 0x1f
+#define MII_BNX2_BLK_ADDR_IEEE0 0x0000
+#define MII_BNX2_BLK_ADDR_GP_STATUS 0x8120
+#define MII_BNX2_GP_TOP_AN_STATUS1 0x1b
+#define MII_BNX2_GP_TOP_AN_SPEED_MSK 0x3f00
+#define MII_BNX2_GP_TOP_AN_SPEED_10 0x0000
+#define MII_BNX2_GP_TOP_AN_SPEED_100 0x0100
+#define MII_BNX2_GP_TOP_AN_SPEED_1G 0x0200
+#define MII_BNX2_GP_TOP_AN_SPEED_2_5G 0x0300
+#define MII_BNX2_GP_TOP_AN_SPEED_1GKV 0x0d00
+#define MII_BNX2_GP_TOP_AN_FD 0x8
+#define MII_BNX2_BLK_ADDR_SERDES_DIG 0x8300
+#define MII_BNX2_SERDES_DIG_1000XCTL1 0x10
+#define MII_BNX2_SD_1000XCTL1_FIBER 0x01
+#define MII_BNX2_SD_1000XCTL1_AUTODET 0x10
+#define MII_BNX2_SERDES_DIG_MISC1 0x18
+#define MII_BNX2_SD_MISC1_FORCE_MSK 0xf
+#define MII_BNX2_SD_MISC1_FORCE_2_5G 0x0
+#define MII_BNX2_SD_MISC1_FORCE 0x10
+#define MII_BNX2_BLK_ADDR_OVER1G 0x8320
+#define MII_BNX2_OVER1G_UP1 0x19
+#define MII_BNX2_BLK_ADDR_BAM_NXTPG 0x8350
+#define MII_BNX2_BAM_NXTPG_CTL 0x10
+#define MII_BNX2_NXTPG_CTL_BAM 0x1
+#define MII_BNX2_NXTPG_CTL_T2 0x2
+#define MII_BNX2_BLK_ADDR_CL73_USERB0 0x8370
+#define MII_BNX2_CL73_BAM_CTL1 0x12
+#define MII_BNX2_CL73_BAM_EN 0x8000
+#define MII_BNX2_CL73_BAM_STA_MGR_EN 0x4000
+#define MII_BNX2_CL73_BAM_NP_AFT_BP_EN 0x2000
+#define MII_BNX2_BLK_ADDR_AER 0xffd0
+#define MII_BNX2_AER_AER 0x1e
+#define MII_BNX2_AER_AER_AN_MMD 0x3800
+#define MII_BNX2_BLK_ADDR_COMBO_IEEEB0 0xffe0
+
#define MIN_ETHERNET_PACKET_SIZE 60
#define MAX_ETHERNET_PACKET_SIZE 1514
#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
#define RX_COPY_THRESH 92
+#define BNX2_MISC_ENABLE_DEFAULT 0x7ffffff
+
#define DMA_READ_CHANS 5
#define DMA_WRITE_CHANS 3
u32 last_status_idx;
u32 flags;
-#define PCIX_FLAG 1
-#define PCI_32BIT_FLAG 2
-#define ONE_TDMA_FLAG 4 /* no longer used */
-#define NO_WOL_FLAG 8
-#define USING_DAC_FLAG 0x10
-#define USING_MSI_FLAG 0x20
-#define ASF_ENABLE_FLAG 0x40
+#define PCIX_FLAG 0x00000001
+#define PCI_32BIT_FLAG 0x00000002
+#define ONE_TDMA_FLAG 0x00000004 /* no longer used */
+#define NO_WOL_FLAG 0x00000008
+#define USING_MSI_FLAG 0x00000020
+#define ASF_ENABLE_FLAG 0x00000040
+#define MSI_CAP_FLAG 0x00000080
+#define ONE_SHOT_MSI_FLAG 0x00000100
+#define PCIE_FLAG 0x00000200
/* Put tx producer and consumer fields in separate cache lines. */
/* Used to synchronize phy accesses. */
spinlock_t phy_lock;
+ spinlock_t indirect_lock;
u32 phy_flags;
#define PHY_SERDES_FLAG 1
#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
#define PHY_DIS_EARLY_DAC_FLAG 0x400
+#define REMOTE_PHY_CAP_FLAG 0x800
+
+ u32 mii_bmcr;
+ u32 mii_bmsr;
+ u32 mii_bmsr1;
+ u32 mii_adv;
+ u32 mii_lpa;
+ u32 mii_up1;
u32 chip_id;
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
u16 req_line_speed;
u8 req_duplex;
+ u8 phy_port;
u8 link_up;
u16 line_speed;
u32 shmem_base;
- u32 fw_ver;
+ char fw_version[32];
int pm_cap;
int pcix_cap;
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
-#define FW_ACK_TIME_OUT_MS 100
+#define FW_ACK_TIME_OUT_MS 1000
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
#define BNX2_DRV_MSG_CODE_DIAG 0x07000000
#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000
#define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000
+#define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000
#define BNX2_DRV_MSG_DATA 0x00ff0000
#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000
#define BNX2_LINK_STATUS_SERDES_LINK (1<<20)
#define BNX2_LINK_STATUS_PARTNER_AD_2500FULL (1<<21)
#define BNX2_LINK_STATUS_PARTNER_AD_2500HALF (1<<22)
+#define BNX2_LINK_STATUS_HEART_BEAT_EXPIRED (1<<31)
#define BNX2_DRV_PULSE_MB 0x00000010
#define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff
* This is used for debugging. */
#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00080000
+#define BNX2_DRV_MB_ARG0 0x00000014
+#define BNX2_NETLINK_SET_LINK_SPEED_10HALF (1<<0)
+#define BNX2_NETLINK_SET_LINK_SPEED_10FULL (1<<1)
+#define BNX2_NETLINK_SET_LINK_SPEED_10 \
+ (BNX2_NETLINK_SET_LINK_SPEED_10HALF | \
+ BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_100HALF (1<<2)
+#define BNX2_NETLINK_SET_LINK_SPEED_100FULL (1<<3)
+#define BNX2_NETLINK_SET_LINK_SPEED_100 \
+ (BNX2_NETLINK_SET_LINK_SPEED_100HALF | \
+ BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF (1<<4)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL (1<<5)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF (1<<6)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL (1<<7)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF (1<<8)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL (1<<9)
+#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG (1<<10)
+#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE (1<<11)
+#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE (1<<12)
+#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE (1<<13)
+#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED (1<<14)
+#define BNX2_NETLINK_SET_LINK_PHY_RESET (1<<15)
+
#define BNX2_DEV_INFO_SIGNATURE 0x00000020
#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900
#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00
#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff
#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000
+#define BNX2_MFW_VER_PTR 0x00000014c
+
#define BNX2_BC_STATE_RESET_TYPE 0x000001c0
#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254
#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff
#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600)
#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700)
+#define BNX2_BC_STATE_CONDITION 0x000001c8
+#define BNX2_CONDITION_MFW_RUN_UNKNOWN 0x00000000
+#define BNX2_CONDITION_MFW_RUN_IPMI 0x00002000
+#define BNX2_CONDITION_MFW_RUN_UMP 0x00004000
+#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000
+#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000
+#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000
+
#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000
#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff
#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff
+#define BNX2_FW_EVT_CODE_MB 0x354
+#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000
+#define BNX2_FW_EVT_CODE_LINK_EVENT 0x00000001
+
+#define BNX2_DRV_ACK_CAP_MB 0x364
+#define BNX2_DRV_ACK_CAP_SIGNATURE 0x35450000
+#define BNX2_CAPABILITY_SIGNATURE_MASK 0xFFFF0000
+
+#define BNX2_FW_CAP_MB 0x368
+#define BNX2_FW_CAP_SIGNATURE 0xaa550000
+#define BNX2_FW_ACK_DRV_SIGNATURE 0x52500000
+#define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000
+#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001
+#define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002
+
+#define BNX2_RPHY_SIGNATURE 0x36c
+#define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a
+
+#define BNX2_RPHY_FLAGS 0x370
+#define BNX2_RPHY_SERDES_LINK 0x374
+#define BNX2_RPHY_COPPER_LINK 0x378
+
#define HOST_VIEW_SHMEM_BASE 0x167c00
#endif
projects / linux-2.6-omap-h63xx.git / blobdiff