//#define BONDING_DEBUG 1
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
/*------------------------------- Link status -------------------------------*/
+/*
+ * Set the carrier state for the master according to the state of its
+ * slaves. If any slaves are up, the master is up. In 802.3ad mode,
+ * do special 802.3ad magic.
+ *
+ * Returns zero if carrier state does not change, nonzero if it does.
+ */
+static int bond_set_carrier(struct bonding *bond)
+{
+ struct slave *slave;
+ int i;
+
+ if (bond->slave_cnt == 0)
+ goto down;
+
+ if (bond->params.mode == BOND_MODE_8023AD)
+ return bond_3ad_set_carrier(bond);
+
+ bond_for_each_slave(bond, slave, i) {
+ if (slave->link == BOND_LINK_UP) {
+ if (!netif_carrier_ok(bond->dev)) {
+ netif_carrier_on(bond->dev);
+ return 1;
+ }
+ return 0;
+ }
+ }
+
+down:
+ if (netif_carrier_ok(bond->dev)) {
+ netif_carrier_off(bond->dev);
+ return 1;
+ }
+ return 0;
+}
+
/*
* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
+ int rv;
best_slave = bond_find_best_slave(bond);
if (best_slave != bond->curr_active_slave) {
bond_change_active_slave(bond, best_slave);
+ rv = bond_set_carrier(bond);
+ if (!rv)
+ return;
+
+ if (netif_carrier_ok(bond->dev)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: first active interface up!\n",
+ bond->dev->name);
+ } else {
+ printk(KERN_INFO DRV_NAME ": %s: "
+ "now running without any active interface !\n",
+ bond->dev->name);
+ }
}
}
}
#define BOND_INTERSECT_FEATURES \
- (NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM|\
- NETIF_F_TSO|NETIF_F_UFO)
+ (NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_TSO | NETIF_F_UFO)
/*
* Compute the common dev->feature set available to all slaves. Some
features &= (slave->dev->features & BOND_INTERSECT_FEATURES);
if ((features & NETIF_F_SG) &&
- !(features & (NETIF_F_IP_CSUM |
- NETIF_F_NO_CSUM |
- NETIF_F_HW_CSUM)))
+ !(features & NETIF_F_ALL_CSUM))
features &= ~NETIF_F_SG;
/*
if (((!bond->curr_active_slave) ||
(bond->curr_active_slave->dev->priv_flags & IFF_SLAVE_INACTIVE)) &&
(new_slave->link != BOND_LINK_DOWN)) {
- dprintk("This is the first active slave\n");
/* first slave or no active slave yet, and this link
is OK, so make this interface the active one */
bond_change_active_slave(bond, new_slave);
+ printk(KERN_INFO DRV_NAME
+ ": %s: first active interface up!\n",
+ bond->dev->name);
+ netif_carrier_on(bond->dev);
+
} else {
dprintk("This is just a backup slave\n");
bond_set_slave_inactive_flags(new_slave);
break;
} /* switch(bond_mode) */
+ bond_set_carrier(bond);
+
write_unlock_bh(&bond->lock);
res = bond_create_slave_symlinks(bond_dev, slave_dev);
bond_alb_deinit_slave(bond, slave);
}
- if (oldcurrent == slave) {
+ if (oldcurrent == slave)
bond_select_active_slave(bond);
- if (!bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
- }
-
if (bond->slave_cnt == 0) {
+ bond_set_carrier(bond);
+
/* if the last slave was removed, zero the mac address
* of the master so it will be set by the application
* to the mac address of the first slave
write_lock_bh(&bond->lock);
+ netif_carrier_off(bond_dev);
+
if (bond->slave_cnt == 0) {
goto out;
}
bond_select_active_slave(bond);
- if (oldcurrent && !bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
-
write_unlock(&bond->curr_slave_lock);
- }
+ } else
+ bond_set_carrier(bond);
re_arm:
if (bond->params.miimon) {
bond_select_active_slave(bond);
- if (oldcurrent && !bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
-
write_unlock(&bond->curr_slave_lock);
}
bond->current_arp_slave = NULL;
}
+ bond_set_carrier(bond);
+
if (slave == bond->curr_active_slave) {
printk(KERN_INFO DRV_NAME
": %s: %s is up and now the "
"active interface\n",
bond_dev->name,
slave->dev->name);
+ netif_carrier_on(bond->dev);
} else {
printk(KERN_INFO DRV_NAME
": %s: backup interface %s is "
(curr) ? curr->dev->name : "None");
}
- seq_printf(seq, "MII Status: %s\n", (curr) ? "up" : "down");
+ seq_printf(seq, "MII Status: %s\n", netif_carrier_ok(bond->dev) ?
+ "up" : "down");
seq_printf(seq, "MII Polling Interval (ms): %d\n", bond->params.miimon);
seq_printf(seq, "Up Delay (ms): %d\n",
bond->params.updelay * bond->params.miimon);
* bond_netdev_event: handle netdev notifier chain events.
*
* This function receives events for the netdev chain. The caller (an
- * ioctl handler calling notifier_call_chain) holds the necessary
+ * ioctl handler calling blocking_notifier_call_chain) holds the necessary
* locks for us to safely manipulate the slave devices (RTNL lock,
* dev_probe_lock).
*/
*/
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
- /* don't acquire bond device's xmit_lock when
+ /* don't acquire bond device's netif_tx_lock when
* transmitting */
bond_dev->features |= NETIF_F_LLTX;
if (newbond)
*newbond = bond_dev->priv;
+ netif_carrier_off(bond_dev);
+
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(bond_dev->priv);
goto done;
projects / linux-2.6-omap-h63xx.git / blobdiff