typhoon: trivial endianness annotations

[linux-2.6-omap-h63xx.git] / drivers / net / dl2k.c

diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 04e3710c908269e3510a9492296ee041e75e717b..5066beb2e7bc43e3e4e6b6e30a47e198dc647467 100644 (file)
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -10,9 +10,9 @@
     (at your option) any later version.
 */
 
-#define DRV_NAME       "D-Link DL2000-based linux driver"
-#define DRV_VERSION    "v1.18"
-#define DRV_RELDATE    "2006/06/27"
+#define DRV_NAME       "DL2000/TC902x-based linux driver"
+#define DRV_VERSION    "v1.19"
+#define DRV_RELDATE    "2007/08/12"
 #include "dl2k.h"
 #include <linux/dma-mapping.h>
 
@@ -97,6 +97,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
        static int version_printed;
        void *ring_space;
        dma_addr_t ring_dma;
+       DECLARE_MAC_BUF(mac);
 
        if (!version_printed++)
                printk ("%s", version);
@@ -116,7 +117,6 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
                err = -ENOMEM;
                goto err_out_res;
        }
-       SET_MODULE_OWNER (dev);
        SET_NETDEV_DEV(dev, &pdev->dev);
 
 #ifdef MEM_MAPPING
@@ -257,10 +257,8 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 
        card_idx++;
 
-       printk (KERN_INFO "%s: %s, %02x:%02x:%02x:%02x:%02x:%02x, IRQ %d\n",
-               dev->name, np->name,
-               dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-               dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], irq);
+       printk (KERN_INFO "%s: %s, %s, IRQ %d\n",
+               dev->name, np->name, print_mac(mac, dev->dev_addr), irq);
        if (tx_coalesce > 1)
                printk(KERN_INFO "tx_coalesce:\t%d packets\n",
                                tx_coalesce);
@@ -292,7 +290,7 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
        return err;
 }
 
-int
+static int
 find_miiphy (struct net_device *dev)
 {
        int i, phy_found = 0;
@@ -316,7 +314,7 @@ find_miiphy (struct net_device *dev)
        return 0;
 }
 
-int
+static int
 parse_eeprom (struct net_device *dev)
 {
        int i, j;
@@ -339,17 +337,24 @@ parse_eeprom (struct net_device *dev)
 #ifdef MEM_MAPPING
        ioaddr = dev->base_addr;
 #endif
-       /* Check CRC */
-       crc = ~ether_crc_le (256 - 4, sromdata);
-       if (psrom->crc != crc) {
-               printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name);
-               return -1;
+       if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) {  /* D-Link Only */
+               /* Check CRC */
+               crc = ~ether_crc_le (256 - 4, sromdata);
+               if (psrom->crc != crc) {
+                       printk (KERN_ERR "%s: EEPROM data CRC error.\n",
+                                       dev->name);
+                       return -1;
+               }
        }
 
        /* Set MAC address */
        for (i = 0; i < 6; i++)
                dev->dev_addr[i] = psrom->mac_addr[i];
 
+       if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) {
+               return 0;
+       }
+
        /* Parse Software Information Block */
        i = 0x30;
        psib = (u8 *) sromdata;
@@ -1091,7 +1096,7 @@ clear_stats (struct net_device *dev)
 }
 
 
-int
+static int
 change_mtu (struct net_device *dev, int new_mtu)
 {
        struct netdev_private *np = netdev_priv(dev);
@@ -1326,7 +1331,7 @@ rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 #define EEP_BUSY 0x8000
 /* Read the EEPROM word */
 /* We use I/O instruction to read/write eeprom to avoid fail on some machines */
-int
+static int
 read_eeprom (long ioaddr, int eep_addr)
 {
        int i = 1000;