/*******************************************************************************
-
+
Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the Free
- Software Foundation; either version 2 of the License, or (at your option)
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
any later version.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
-
+
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
+ this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
+
The full GNU General Public License is included in this distribution in the
file called LICENSE.
-
+
Contact Information:
Linux NICS <linux.nics@intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
* TODO:
* o several entry points race with dev->close
* o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
*/
#include <linux/config.h>
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.14-k4"DRV_EXT
+#define DRV_VERSION "3.5.10-k2"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
cuc_dump_complete = 0x0000A005,
cuc_dump_reset_complete = 0x0000A007,
};
-
+
enum port {
software_reset = 0x0000,
selftest = 0x0001,
u16 leds;
u16 eeprom_wc;
u16 eeprom[256];
+ spinlock_t mdio_lock;
};
static inline void e100_write_flush(struct nic *nic)
(void)readb(&nic->csr->scb.status);
}
-static inline void e100_enable_irq(struct nic *nic)
+static void e100_enable_irq(struct nic *nic)
{
unsigned long flags;
e100_write_flush(nic);
}
-static inline void e100_disable_irq(struct nic *nic)
+static void e100_disable_irq(struct nic *nic)
{
unsigned long flags;
ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
-
+
writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
-
+
/* Eeprom drives a dummy zero to EEDO after receiving
* complete address. Use this to adjust addr_len. */
ctrl = readb(&nic->csr->eeprom_ctrl_lo);
*addr_len -= (i - 16);
i = 17;
}
-
+
data = (data << 1) | (ctrl & eedo ? 1 : 0);
}
#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
-static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
{
unsigned long flags;
unsigned int i;
return err;
}
-static inline int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
{
struct cb *cb;
{
u32 data_out = 0;
unsigned int i;
+ unsigned long flags;
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (readl(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
- for(i = 0; i < 100; i++) {
+ for (i = 0; i < 100; i++) {
udelay(20);
- if((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
+ if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
break;
}
-
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
DPRINTK(HW, DEBUG,
"%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
}
-static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
/* *INDENT-OFF* */
static struct {
* driver can change the algorithm.
*
* INTDELAY - This loads the dead-man timer with its inital value.
-* When this timer expires the interrupt is asserted, and the
+* When this timer expires the interrupt is asserted, and the
* timer is reset each time a new packet is received. (see
* BUNDLEMAX below to set the limit on number of chained packets)
* The current default is 0x600 or 1536. Experiments show that
* the value should probably stay within the 0x200 - 0x1000.
*
-* BUNDLEMAX -
+* BUNDLEMAX -
* This sets the maximum number of frames that will be bundled. In
* some situations, such as the TCP windowing algorithm, it may be
* better to limit the growth of the bundle size than let it go as
* an interrupt for every frame received. If you do not want to put
* a limit on the bundle size, set this value to xFFFF.
*
-* BUNDLESMALL -
+* BUNDLESMALL -
* This contains a bit-mask describing the minimum size frame that
* will be bundled. The default masks the lower 7 bits, which means
* that any frame less than 128 bytes in length will not be bundled,
*
* The current default is 0xFF80, which masks out the lower 7 bits.
* This means that any frame which is x7F (127) bytes or smaller
-* will cause an immediate interrupt. Because this value must be a
+* will cause an immediate interrupt. Because this value must be a
* bit mask, there are only a few valid values that can be used. To
* turn this feature off, the driver can write the value xFFFF to the
* lower word of this instruction (in the same way that the other
* standard Ethernet frames are <= 2047 bytes in length.
*************************************************************************/
-/* if you wish to disable the ucode functionality, while maintaining the
+/* if you wish to disable the ucode functionality, while maintaining the
* workarounds it provides, set the following defines to:
* BUNDLESMALL 0
* BUNDLEMAX 1
for (i = 0; i < UCODE_SIZE; i++)
cb->u.ucode[i] = cpu_to_le32(ucode[i]);
- cb->command = cpu_to_le16(cb_ucode);
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
return;
}
noloaducode:
- cb->command = cpu_to_le16(cb_nop);
+ cb->command = cpu_to_le16(cb_nop | cb_el);
+}
+
+static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interupts, something could have been set */
+ writeb(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
}
- if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
(mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) {
/* enable/disable MDI/MDI-X auto-switching.
MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */
if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) ||
- (nic->mac == mac_82551_10) || (nic->mii.force_media) ||
- !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))
+ (nic->mac == mac_82551_10) || (nic->mii.force_media) ||
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))
mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0);
else
mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH);
return err;
if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
return err;
- if((err = e100_exec_cb(nic, NULL, e100_load_ucode)))
+ if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
return err;
if((err = e100_exec_cb(nic, NULL, e100_configure)))
return err;
}
}
-
+
if(e100_exec_cmd(nic, cuc_dump_reset, 0))
DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
}
mii_check_link(&nic->mii);
/* Software generated interrupt to recover from (rare) Rx
- * allocation failure.
- * Unfortunately have to use a spinlock to not re-enable interrupts
- * accidentally, due to hardware that shares a register between the
- * interrupt mask bit and the SW Interrupt generation bit */
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
spin_lock_irq(&nic->cmd_lock);
writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
spin_unlock_irq(&nic->cmd_lock);
mod_timer(&nic->watchdog, jiffies + E100_WATCHDOG_PERIOD);
}
-static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
struct sk_buff *skb)
{
cb->command = nic->tx_command;
return 0;
}
-static inline int e100_tx_clean(struct nic *nic)
+static int e100_tx_clean(struct nic *nic)
{
struct cb *cb;
int tx_cleaned = 0;
}
#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
-static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
{
if(!(rx->skb = dev_alloc_skb(RFD_BUF_LEN + NET_IP_ALIGN)))
return -ENOMEM;
return 0;
}
-static inline int e100_rx_indicate(struct nic *nic, struct rx *rx,
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
unsigned int *work_done, unsigned int work_to_do)
{
struct sk_buff *skb = rx->skb;
return 0;
}
-static inline void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
unsigned int work_to_do)
{
struct rx *rx;
struct rx *rx_to_start = NULL;
/* are we already rnr? then pay attention!!! this ensures that
- * the state machine progression never allows a start with a
+ * the state machine progression never allows a start with a
* partially cleaned list, avoiding a race between hardware
* and rx_to_clean when in NAPI mode */
if(RU_SUSPENDED == nic->ru_running)
{
struct nic *nic = netdev_priv(netdev);
- /* Reset outside of interrupt context, to avoid request_irq
+ /* Reset outside of interrupt context, to avoid request_irq
* in interrupt context */
schedule_work(&nic->tx_timeout_task);
}
struct param_range *rfds = &nic->params.rfds;
struct param_range *cbs = &nic->params.cbs;
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
if(netif_running(netdev))
/* locks must be initialized before calling hw_reset */
spin_lock_init(&nic->cb_lock);
spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
/* Reset the device before pci_set_master() in case device is in some
* funky state and has an interrupt pending - hint: we don't have the
nic->flags |= wol_magic;
/* ack any pending wake events, disable PME */
- pci_enable_wake(pdev, 0, 0);
+ err = pci_enable_wake(pdev, 0, 0);
+ if (err)
+ DPRINTK(PROBE, ERR, "Error clearing wake event\n");
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev))) {
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
+ int retval;
if(netif_running(netdev))
e100_down(nic);
netif_device_detach(netdev);
pci_save_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), nic->flags & (wol_magic | e100_asf(nic)));
+ retval = pci_enable_wake(pdev, pci_choose_state(pdev, state),
+ nic->flags & (wol_magic | e100_asf(nic)));
+ if (retval)
+ DPRINTK(PROBE,ERR, "Error enabling wake\n");
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ retval = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ if (retval)
+ DPRINTK(PROBE,ERR, "Error %d setting power state\n", retval);
return 0;
}
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
+ int retval;
- pci_set_power_state(pdev, PCI_D0);
+ retval = pci_set_power_state(pdev, PCI_D0);
+ if (retval)
+ DPRINTK(PROBE,ERR, "Error waking adapter\n");
pci_restore_state(pdev);
/* ack any pending wake events, disable PME */
- pci_enable_wake(pdev, 0, 0);
- if(e100_hw_init(nic))
- DPRINTK(HW, ERR, "e100_hw_init failed\n");
+ retval = pci_enable_wake(pdev, 0, 0);
+ if (retval)
+ DPRINTK(PROBE,ERR, "Error clearing wake events\n");
netif_device_attach(netdev);
if(netif_running(netdev))
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
+ int retval;
#ifdef CONFIG_PM
- pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
+ retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
#else
- pci_enable_wake(pdev, 0, nic->flags & (wol_magic));
+ retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic));
#endif
+ if (retval)
+ DPRINTK(PROBE,ERR, "Error enabling wake\n");
}
.suspend = e100_suspend,
.resume = e100_resume,
#endif
- .shutdown = e100_shutdown,
+ .shutdown = e100_shutdown,
};
static int __init e100_init_module(void)
projects / linux-2.6-omap-h63xx.git / blobdiff