* enabled. 82557 pads with 7Eh, while the later controllers pad
* with 00h.
*
- * IV. Recieve
+ * IV. Receive
*
* The Receive Frame Area (RFA) comprises a ring of Receive Frame
* Descriptors (RFD) + data buffer, thus forming the simplified mode
* and Rx indication and re-allocation happen in the same context,
* therefore no locking is required. A software-generated interrupt
* is generated from the watchdog to recover from a failed allocation
- * senario where all Rx resources have been indicated and none re-
+ * scenario where all Rx resources have been indicated and none re-
* placed.
*
* V. Miscellaneous
};
struct rfd {
- u16 status;
- u16 command;
- u32 link;
- u32 rbd;
- u16 actual_size;
- u16 size;
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
};
struct rx {
#define E100_MAX_MULTICAST_ADDRS 64
struct multi {
- u16 count;
+ __le16 count;
u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
};
/* Important: keep total struct u32-aligned */
#define UCODE_SIZE 134
struct cb {
- u16 status;
- u16 command;
- u32 link;
+ __le16 status;
+ __le16 command;
+ __le32 link;
union {
u8 iaaddr[ETH_ALEN];
- u32 ucode[UCODE_SIZE];
+ __le32 ucode[UCODE_SIZE];
struct config config;
struct multi multi;
struct {
u8 threshold;
u8 tbd_count;
struct {
- u32 buf_addr;
- u16 size;
+ __le32 buf_addr;
+ __le16 size;
u16 eol;
} tbd;
} tcb;
- u32 dump_buffer_addr;
+ __le32 dump_buffer_addr;
} u;
struct cb *next, *prev;
dma_addr_t dma_addr;
};
struct stats {
- u32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
tx_multiple_collisions, tx_total_collisions;
- u32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
rx_short_frame_errors;
- u32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
- u16 xmt_tco_frames, rcv_tco_frames;
- u32 complete;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
};
struct mem {
struct cb *cb_to_use;
struct cb *cb_to_send;
struct cb *cb_to_clean;
- u16 tx_command;
+ __le16 tx_command;
/* End: frequently used values: keep adjacent for cache effect */
enum {
u16 leds;
u16 eeprom_wc;
- u16 eeprom[256];
+ __le16 eeprom[256];
spinlock_t mdio_lock;
};
return 0;
}
-static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data)
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
{
u32 cmd_addr_data[3];
u8 ctrl;
/* Three cmds: write/erase enable, write data, write/erase disable */
cmd_addr_data[0] = op_ewen << (addr_len - 2);
cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
- cpu_to_le16(data);
+ le16_to_cpu(data);
cmd_addr_data[2] = op_ewds << (addr_len - 2);
/* Bit-bang cmds to write word to eeprom */
};
/* General technique stolen from the eepro100 driver - very clever */
-static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
{
u32 cmd_addr_data;
u16 data = 0;
iowrite8(0, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- return le16_to_cpu(data);
+ return cpu_to_le16(data);
};
/* Load entire EEPROM image into driver cache and validate checksum */
for(addr = 0; addr < nic->eeprom_wc; addr++) {
nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
if(addr < nic->eeprom_wc - 1)
- checksum += cpu_to_le16(nic->eeprom[addr]);
+ checksum += le16_to_cpu(nic->eeprom[addr]);
}
/* The checksum, stored in the last word, is calculated such that
* the sum of words should be 0xBABA */
- checksum = le16_to_cpu(0xBABA - checksum);
- if(checksum != nic->eeprom[nic->eeprom_wc - 1]) {
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
if (!eeprom_bad_csum_allow)
return -EAGAIN;
/* The checksum, stored in the last word, is calculated such that
* the sum of words should be 0xBABA */
for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
- checksum += cpu_to_le16(nic->eeprom[addr]);
- nic->eeprom[nic->eeprom_wc - 1] = le16_to_cpu(0xBABA - checksum);
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
nic->eeprom[nic->eeprom_wc - 1]);
/* Quadwords to DMA into FIFO before starting frame transmit */
nic->tx_threshold = 0xE0;
- /* no interrupt for every tx completion, delay = 256us if not 557*/
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
/* Template for a freshly allocated RFD */
nic->blank_rfd.command = 0;
- nic->blank_rfd.rbd = 0xFFFFFFFF;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
/* MII setup */
struct net_device *dev = nic->netdev;
struct net_device_stats *ns = &dev->stats;
struct stats *s = &nic->mem->stats;
- u32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
- (nic->mac < mac_82559_D101M) ? (u32 *)&s->xmt_tco_frames :
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
&s->complete;
/* Device's stats reporting may take several microseconds to
- * complete, so where always waiting for results of the
+ * complete, so we're always waiting for results of the
* previous command. */
- if(*complete == le32_to_cpu(cuc_dump_reset_complete)) {
+ if(*complete == cpu_to_le32(cuc_dump_reset_complete)) {
*complete = 0;
nic->tx_frames = le32_to_cpu(s->tx_good_frames);
nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
- if(pci_dma_mapping_error(rx->dma_addr)) {
+ if (pci_dma_mapping_error(rx->dma_addr)) {
dev_kfree_skb_any(rx->skb);
rx->skb = NULL;
rx->dma_addr = 0;
/* Link the RFD to end of RFA by linking previous RFD to
* this one. We are safe to touch the previous RFD because
* it is protected by the before last buffer's el bit being set */
- if(rx->prev->skb) {
+ if (rx->prev->skb) {
struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
- put_unaligned(cpu_to_le32(rx->dma_addr),
- (u32 *)&prev_rfd->link);
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
}
return 0;
if(restart_required) {
// ack the rnr?
- writeb(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
e100_start_receiver(nic, nic->rx_to_clean);
if(work_done)
(*work_done)++;
struct nic *nic = netdev_priv(netdev);
unregister_netdev(netdev);
e100_free(nic);
- iounmap(nic->csr);
+ pci_iounmap(pdev, nic->csr);
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
}
-#ifdef CONFIG_PM
static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
+ e100_down(nic);
netif_device_detach(netdev);
pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- free_irq(pdev->irq, netdev);
-
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
+#ifdef CONFIG_PM
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e100_shutdown(struct pci_dev *pdev)
{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
-
- if ((nic->flags & wol_magic) | e100_asf(nic)) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
- }
-
- free_irq(pdev->irq, netdev);
-
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ e100_suspend(pdev, PMSG_SUSPEND);
}
/* ------------------ PCI Error Recovery infrastructure -------------- */
/**
* e100_io_error_detected - called when PCI error is detected.
* @pdev: Pointer to PCI device
- * @state: The current pci conneection state
+ * @state: The current pci connection state
*/
static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
- /* Similar to calling e100_down(), but avoids adpater I/O. */
+ /* Similar to calling e100_down(), but avoids adapter I/O. */
netdev->stop(netdev);
- /* Detach; put netif into state similar to hotplug unplug. */
+ /* Detach; put netif into a state similar to hotplug unplug. */
napi_enable(&nic->napi);
netif_device_detach(netdev);
pci_disable_device(pdev);
projects / linux-2.6-omap-h63xx.git / blobdiff