/*******************************************************************************
- Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Contact Information:
Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#include <asm/uaccess.h>
-extern char e1000_driver_name[];
-extern char e1000_driver_version[];
-
-extern int e1000_up(struct e1000_adapter *adapter);
-extern void e1000_down(struct e1000_adapter *adapter);
-extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
-extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
-extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_update_stats(struct e1000_adapter *adapter);
-
struct e1000_stats {
char stat_string[ETH_GSTRING_LEN];
int sizeof_stat;
{ "tx_bytes", E1000_STAT(net_stats.tx_bytes) },
{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
- { "rx_dropped", E1000_STAT(net_stats.rx_dropped) },
{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
{ "multicast", E1000_STAT(net_stats.multicast) },
{ "collisions", E1000_STAT(net_stats.collisions) },
{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
{ "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) },
{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
- { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) },
{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
{ "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) },
{ "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) },
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
};
-#ifdef CONFIG_E1000_MQ
-#define E1000_QUEUE_STATS_LEN \
- (((struct e1000_adapter *)netdev->priv)->num_tx_queues + \
- ((struct e1000_adapter *)netdev->priv)->num_rx_queues) \
- * (sizeof(struct e1000_queue_stats) / sizeof(uint64_t))
-#else
#define E1000_QUEUE_STATS_LEN 0
-#endif
#define E1000_GLOBAL_STATS_LEN \
sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if(hw->media_type == e1000_media_type_copper) {
+ if (hw->media_type == e1000_media_type_copper) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
ecmd->advertising = ADVERTISED_TP;
- if(hw->autoneg == 1) {
+ if (hw->autoneg == 1) {
ecmd->advertising |= ADVERTISED_Autoneg;
/* the e1000 autoneg seems to match ethtool nicely */
ecmd->port = PORT_TP;
ecmd->phy_address = hw->phy_addr;
- if(hw->mac_type == e1000_82543)
+ if (hw->mac_type == e1000_82543)
ecmd->transceiver = XCVR_EXTERNAL;
else
ecmd->transceiver = XCVR_INTERNAL;
ecmd->port = PORT_FIBRE;
- if(hw->mac_type >= e1000_82545)
+ if (hw->mac_type >= e1000_82545)
ecmd->transceiver = XCVR_INTERNAL;
else
ecmd->transceiver = XCVR_EXTERNAL;
}
- if(netif_carrier_ok(adapter->netdev)) {
+ if (netif_carrier_ok(adapter->netdev)) {
e1000_get_speed_and_duplex(hw, &adapter->link_speed,
&adapter->link_duplex);
/* unfortunatly FULL_DUPLEX != DUPLEX_FULL
* and HALF_DUPLEX != DUPLEX_HALF */
- if(adapter->link_duplex == FULL_DUPLEX)
+ if (adapter->link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->autoneg = 1;
- if(hw->media_type == e1000_media_type_fiber)
+ if (hw->media_type == e1000_media_type_fiber)
hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
- else
+ else
hw->autoneg_advertised = ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_TP;
ecmd->advertising = hw->autoneg_advertised;
} else
- if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex))
+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex))
return -EINVAL;
/* reset the link */
- if(netif_running(adapter->netdev)) {
+ if (netif_running(adapter->netdev)) {
e1000_down(adapter);
e1000_reset(adapter);
e1000_up(adapter);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- pause->autoneg =
+ pause->autoneg =
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-
- if(hw->fc == e1000_fc_rx_pause)
+
+ if (hw->fc == e1000_fc_rx_pause)
pause->rx_pause = 1;
- else if(hw->fc == e1000_fc_tx_pause)
+ else if (hw->fc == e1000_fc_tx_pause)
pause->tx_pause = 1;
- else if(hw->fc == e1000_fc_full) {
+ else if (hw->fc == e1000_fc_full) {
pause->rx_pause = 1;
pause->tx_pause = 1;
}
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
-
+
adapter->fc_autoneg = pause->autoneg;
- if(pause->rx_pause && pause->tx_pause)
+ if (pause->rx_pause && pause->tx_pause)
hw->fc = e1000_fc_full;
- else if(pause->rx_pause && !pause->tx_pause)
+ else if (pause->rx_pause && !pause->tx_pause)
hw->fc = e1000_fc_rx_pause;
- else if(!pause->rx_pause && pause->tx_pause)
+ else if (!pause->rx_pause && pause->tx_pause)
hw->fc = e1000_fc_tx_pause;
- else if(!pause->rx_pause && !pause->tx_pause)
+ else if (!pause->rx_pause && !pause->tx_pause)
hw->fc = e1000_fc_none;
hw->original_fc = hw->fc;
- if(adapter->fc_autoneg == AUTONEG_ENABLE) {
- if(netif_running(adapter->netdev)) {
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
e1000_down(adapter);
e1000_up(adapter);
} else
e1000_reset(adapter);
- }
- else
+ } else
return ((hw->media_type == e1000_media_type_fiber) ?
e1000_setup_link(hw) : e1000_force_mac_fc(hw));
-
+
return 0;
}
struct e1000_adapter *adapter = netdev_priv(netdev);
adapter->rx_csum = data;
- if(netif_running(netdev)) {
+ if (netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
} else
e1000_reset(adapter);
return 0;
}
-
+
static uint32_t
e1000_get_tx_csum(struct net_device *netdev)
{
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if(adapter->hw.mac_type < e1000_82543) {
+ if (adapter->hw.mac_type < e1000_82543) {
if (!data)
return -EINVAL;
return 0;
e1000_set_tso(struct net_device *netdev, uint32_t data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if((adapter->hw.mac_type < e1000_82544) ||
- (adapter->hw.mac_type == e1000_82547))
+ if ((adapter->hw.mac_type < e1000_82544) ||
+ (adapter->hw.mac_type == e1000_82547))
return data ? -EINVAL : 0;
if (data)
netdev->features |= NETIF_F_TSO;
else
netdev->features &= ~NETIF_F_TSO;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = TRUE;
return 0;
-}
+}
#endif /* NETIF_F_TSO */
static uint32_t
adapter->msg_enable = data;
}
-static int
+static int
e1000_get_regs_len(struct net_device *netdev)
{
#define E1000_REGS_LEN 32
regs_buff[11] = E1000_READ_REG(hw, TIDV);
regs_buff[12] = adapter->hw.phy_type; /* PHY type (IGP=1, M88=0) */
- if(hw->phy_type == e1000_phy_igp) {
+ if (hw->phy_type == e1000_phy_igp) {
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
IGP01E1000_PHY_AGC_A);
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
- if(hw->mac_type >= e1000_82540 &&
+ if (hw->mac_type >= e1000_82540 &&
hw->media_type == e1000_media_type_copper) {
regs_buff[26] = E1000_READ_REG(hw, MANC);
}
int ret_val = 0;
uint16_t i;
- if(eeprom->len == 0)
+ if (eeprom->len == 0)
return -EINVAL;
eeprom->magic = hw->vendor_id | (hw->device_id << 16);
eeprom_buff = kmalloc(sizeof(uint16_t) *
(last_word - first_word + 1), GFP_KERNEL);
- if(!eeprom_buff)
+ if (!eeprom_buff)
return -ENOMEM;
- if(hw->eeprom.type == e1000_eeprom_spi)
+ if (hw->eeprom.type == e1000_eeprom_spi)
ret_val = e1000_read_eeprom(hw, first_word,
last_word - first_word + 1,
eeprom_buff);
else {
for (i = 0; i < last_word - first_word + 1; i++)
- if((ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ if ((ret_val = e1000_read_eeprom(hw, first_word + i, 1,
&eeprom_buff[i])))
break;
}
int max_len, first_word, last_word, ret_val = 0;
uint16_t i;
- if(eeprom->len == 0)
+ if (eeprom->len == 0)
return -EOPNOTSUPP;
- if(eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
return -EFAULT;
max_len = hw->eeprom.word_size * 2;
first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if(!eeprom_buff)
+ if (!eeprom_buff)
return -ENOMEM;
ptr = (void *)eeprom_buff;
- if(eeprom->offset & 1) {
+ if (eeprom->offset & 1) {
/* need read/modify/write of first changed EEPROM word */
/* only the second byte of the word is being modified */
ret_val = e1000_read_eeprom(hw, first_word, 1,
&eeprom_buff[0]);
ptr++;
}
- if(((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
/* need read/modify/write of last changed EEPROM word */
/* only the first byte of the word is being modified */
ret_val = e1000_read_eeprom(hw, last_word, 1,
ret_val = e1000_write_eeprom(hw, first_word,
last_word - first_word + 1, eeprom_buff);
- /* Update the checksum over the first part of the EEPROM if needed
+ /* Update the checksum over the first part of the EEPROM if needed
* and flush shadow RAM for 82573 conrollers */
- if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
+ if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
(hw->mac_type == e1000_82573)))
e1000_update_eeprom_checksum(hw);
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+ uint16_t eeprom_data;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 8257{1|2|3} controllers */
+ e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
+ switch (adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+ break;
+ default:
+ sprintf(firmware_version, "N/A");
+ }
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->n_stats = E1000_STATS_LEN;
drvinfo->testinfo_len = E1000_TEST_LEN;
ring->rx_jumbo_pending = 0;
}
-static int
+static int
e1000_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
struct e1000_rx_ring *rxdr, *rx_old, *rx_new;
int i, err, tx_ring_size, rx_ring_size;
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
txdr = adapter->tx_ring;
rxdr = adapter->rx_ring;
- if((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
E1000_MAX_RXD : E1000_MAX_82544_RXD));
- E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+ E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD);
txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ?
E1000_MAX_TXD : E1000_MAX_82544_TXD));
- E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+ E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
for (i = 0; i < adapter->num_tx_queues; i++)
txdr[i].count = txdr->count;
for (i = 0; i < adapter->num_rx_queues; i++)
rxdr[i].count = rxdr->count;
- if(netif_running(adapter->netdev)) {
+ if (netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
kfree(rx_old);
adapter->rx_ring = rx_new;
adapter->tx_ring = tx_new;
- if((err = e1000_up(adapter)))
+ if ((err = e1000_up(adapter)))
return err;
}
uint32_t pat, value; \
uint32_t test[] = \
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for(pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \
+ for (pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \
E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \
value = E1000_READ_REG(&adapter->hw, R); \
- if(value != (test[pat] & W & M)) { \
+ if (value != (test[pat] & W & M)) { \
DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
E1000_##R, value, (test[pat] & W & M)); \
uint32_t value; \
E1000_WRITE_REG(&adapter->hw, R, W & M); \
value = E1000_READ_REG(&adapter->hw, R); \
- if((W & M) != (value & M)) { \
+ if ((W & M) != (value & M)) { \
DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
"expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
/* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
+ case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
case e1000_82573:
value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle);
E1000_WRITE_REG(&adapter->hw, STATUS, toggle);
after = E1000_READ_REG(&adapter->hw, STATUS) & toggle;
- if(value != after) {
+ if (value != after) {
DPRINTK(DRV, ERR, "failed STATUS register test got: "
"0x%08X expected: 0x%08X\n", after, value);
*data = 1;
REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
- if(adapter->hw.mac_type >= e1000_82543) {
+ if (adapter->hw.mac_type >= e1000_82543) {
REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
- for(i = 0; i < E1000_RAR_ENTRIES; i++) {
+ for (i = 0; i < E1000_RAR_ENTRIES; i++) {
REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
0xFFFFFFFF);
REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
}
- for(i = 0; i < E1000_MC_TBL_SIZE; i++)
+ for (i = 0; i < E1000_MC_TBL_SIZE; i++)
REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
*data = 0;
*data = 0;
/* Read and add up the contents of the EEPROM */
- for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
- if((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) {
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) {
*data = 1;
break;
}
}
/* If Checksum is not Correct return error else test passed */
- if((checksum != (uint16_t) EEPROM_SUM) && !(*data))
+ if ((checksum != (uint16_t) EEPROM_SUM) && !(*data))
*data = 2;
return *data;
*data = 0;
/* Hook up test interrupt handler just for this test */
- if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
+ if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
shared_int = FALSE;
- } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
netdev->name, netdev)){
*data = 1;
return -1;
msec_delay(10);
/* Test each interrupt */
- for(; i < 10; i++) {
+ for (; i < 10; i++) {
/* Interrupt to test */
mask = 1 << i;
- if(!shared_int) {
+ if (!shared_int) {
/* Disable the interrupt to be reported in
* the cause register and then force the same
* interrupt and see if one gets posted. If
E1000_WRITE_REG(&adapter->hw, IMC, mask);
E1000_WRITE_REG(&adapter->hw, ICS, mask);
msec_delay(10);
-
- if(adapter->test_icr & mask) {
+
+ if (adapter->test_icr & mask) {
*data = 3;
break;
}
E1000_WRITE_REG(&adapter->hw, ICS, mask);
msec_delay(10);
- if(!(adapter->test_icr & mask)) {
+ if (!(adapter->test_icr & mask)) {
*data = 4;
break;
}
- if(!shared_int) {
+ if (!shared_int) {
/* Disable the other interrupts to be reported in
* the cause register and then force the other
* interrupts and see if any get posted. If
E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF);
msec_delay(10);
- if(adapter->test_icr) {
+ if (adapter->test_icr) {
*data = 5;
break;
}
struct pci_dev *pdev = adapter->pdev;
int i;
- if(txdr->desc && txdr->buffer_info) {
- for(i = 0; i < txdr->count; i++) {
- if(txdr->buffer_info[i].dma)
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
pci_unmap_single(pdev, txdr->buffer_info[i].dma,
txdr->buffer_info[i].length,
PCI_DMA_TODEVICE);
- if(txdr->buffer_info[i].skb)
+ if (txdr->buffer_info[i].skb)
dev_kfree_skb(txdr->buffer_info[i].skb);
}
}
- if(rxdr->desc && rxdr->buffer_info) {
- for(i = 0; i < rxdr->count; i++) {
- if(rxdr->buffer_info[i].dma)
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
rxdr->buffer_info[i].length,
PCI_DMA_FROMDEVICE);
- if(rxdr->buffer_info[i].skb)
+ if (rxdr->buffer_info[i].skb)
dev_kfree_skb(rxdr->buffer_info[i].skb);
}
}
- if(txdr->desc) {
+ if (txdr->desc) {
pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
txdr->desc = NULL;
}
- if(rxdr->desc) {
+ if (rxdr->desc) {
pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
rxdr->desc = NULL;
}
txdr->buffer_info = NULL;
kfree(rxdr->buffer_info);
rxdr->buffer_info = NULL;
+
return;
}
/* Setup Tx descriptor ring and Tx buffers */
- if(!txdr->count)
- txdr->count = E1000_DEFAULT_TXD;
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
size = txdr->count * sizeof(struct e1000_buffer);
- if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
+ if (!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
ret_val = 1;
goto err_nomem;
}
txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
E1000_ROUNDUP(txdr->size, 4096);
- if(!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) {
+ if (!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) {
ret_val = 2;
goto err_nomem;
}
E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
- for(i = 0; i < txdr->count; i++) {
+ for (i = 0; i < txdr->count; i++) {
struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
struct sk_buff *skb;
unsigned int size = 1024;
- if(!(skb = alloc_skb(size, GFP_KERNEL))) {
+ if (!(skb = alloc_skb(size, GFP_KERNEL))) {
ret_val = 3;
goto err_nomem;
}
/* Setup Rx descriptor ring and Rx buffers */
- if(!rxdr->count)
- rxdr->count = E1000_DEFAULT_RXD;
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
size = rxdr->count * sizeof(struct e1000_buffer);
- if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
+ if (!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
ret_val = 4;
goto err_nomem;
}
memset(rxdr->buffer_info, 0, size);
rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
- if(!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
+ if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
ret_val = 5;
goto err_nomem;
}
(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- for(i = 0; i < rxdr->count; i++) {
+ for (i = 0; i < rxdr->count; i++) {
struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
struct sk_buff *skb;
- if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
+ if (!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
GFP_KERNEL))) {
ret_val = 6;
goto err_nomem;
/* Check Phy Configuration */
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
- if(phy_reg != 0x4100)
+ if (phy_reg != 0x4100)
return 9;
e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
- if(phy_reg != 0x0070)
+ if (phy_reg != 0x0070)
return 10;
e1000_read_phy_reg(&adapter->hw, 29, &phy_reg);
- if(phy_reg != 0x001A)
+ if (phy_reg != 0x001A)
return 11;
return 0;
adapter->hw.autoneg = FALSE;
- if(adapter->hw.phy_type == e1000_phy_m88) {
+ if (adapter->hw.phy_type == e1000_phy_m88) {
/* Auto-MDI/MDIX Off */
e1000_write_phy_reg(&adapter->hw,
M88E1000_PHY_SPEC_CTRL, 0x0808);
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
/* autoneg off */
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
+ } else if (adapter->hw.phy_type == e1000_phy_gg82563) {
+ e1000_write_phy_reg(&adapter->hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x1CE);
}
/* force 1000, set loopback */
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
E1000_CTRL_FD); /* Force Duplex to FULL */
- if(adapter->hw.media_type == e1000_media_type_copper &&
+ if (adapter->hw.media_type == e1000_media_type_copper &&
adapter->hw.phy_type == e1000_phy_m88) {
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
} else {
/* Set the ILOS bit on the fiber Nic is half
* duplex link is detected. */
stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
- if((stat_reg & E1000_STATUS_FD) == 0)
+ if ((stat_reg & E1000_STATUS_FD) == 0)
ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
}
/* Disable the receiver on the PHY so when a cable is plugged in, the
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
*/
- if(adapter->hw.phy_type == e1000_phy_m88)
+ if (adapter->hw.phy_type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
udelay(500);
switch (adapter->hw.mac_type) {
case e1000_82543:
- if(adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.media_type == e1000_media_type_copper) {
/* Attempt to setup Loopback mode on Non-integrated PHY.
* Some PHY registers get corrupted at random, so
* attempt this 10 times.
*/
- while(e1000_nonintegrated_phy_loopback(adapter) &&
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
count++ < 10);
- if(count < 11)
+ if (count < 11)
return 0;
}
break;
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_80003es2lan:
return e1000_integrated_phy_loopback(adapter);
break;
static int
e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
+ struct e1000_hw *hw = &adapter->hw;
uint32_t rctl;
- if(adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) {
- if(adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3)
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
return e1000_set_phy_loopback(adapter);
- else {
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+#define E1000_SERDES_LB_ON 0x410
+ e1000_set_phy_loopback(adapter);
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
+ msec_delay(10);
+ return 0;
+ break;
+ default:
+ rctl = E1000_READ_REG(hw, RCTL);
rctl |= E1000_RCTL_LBM_TCVR;
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_REG(hw, RCTL, rctl);
return 0;
}
- } else if(adapter->hw.media_type == e1000_media_type_copper)
+ } else if (hw->media_type == e1000_media_type_copper)
return e1000_set_phy_loopback(adapter);
return 7;
static void
e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
+ struct e1000_hw *hw = &adapter->hw;
uint32_t rctl;
uint16_t phy_reg;
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl = E1000_READ_REG(hw, RCTL);
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_REG(hw, RCTL, rctl);
- if(adapter->hw.media_type == e1000_media_type_copper ||
- ((adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) &&
- (adapter->hw.mac_type == e1000_82545 ||
- adapter->hw.mac_type == e1000_82546 ||
- adapter->hw.mac_type == e1000_82545_rev_3 ||
- adapter->hw.mac_type == e1000_82546_rev_3))) {
- adapter->hw.autoneg = TRUE;
- e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
- if(phy_reg & MII_CR_LOOPBACK) {
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+#define E1000_SERDES_LB_OFF 0x400
+ E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
+ msec_delay(10);
+ break;
+ }
+ /* Fall Through */
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = TRUE;
+ if (hw->phy_type == e1000_phy_gg82563) {
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x180);
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
- e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
- e1000_phy_reset(&adapter->hw);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
}
+ break;
}
}
e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
{
memset(skb->data, 0xFF, frame_size);
- frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size;
+ frame_size &= ~1;
memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
static int
e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
{
- frame_size = (frame_size % 2) ? (frame_size - 1) : frame_size;
- if(*(skb->data + 3) == 0xFF) {
- if((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
(*(skb->data + frame_size / 2 + 12) == 0xAF)) {
return 0;
}
E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
- /* Calculate the loop count based on the largest descriptor ring
+ /* Calculate the loop count based on the largest descriptor ring
* The idea is to wrap the largest ring a number of times using 64
* send/receive pairs during each loop
*/
- if(rxdr->count <= txdr->count)
+ if (rxdr->count <= txdr->count)
lc = ((txdr->count / 64) * 2) + 1;
else
lc = ((rxdr->count / 64) * 2) + 1;
k = l = 0;
- for(j = 0; j <= lc; j++) { /* loop count loop */
- for(i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
1024);
- pci_dma_sync_single_for_device(pdev,
+ pci_dma_sync_single_for_device(pdev,
txdr->buffer_info[k].dma,
txdr->buffer_info[k].length,
PCI_DMA_TODEVICE);
- if(unlikely(++k == txdr->count)) k = 0;
+ if (unlikely(++k == txdr->count)) k = 0;
}
E1000_WRITE_REG(&adapter->hw, TDT, k);
msec_delay(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;
do { /* receive the sent packets */
- pci_dma_sync_single_for_cpu(pdev,
+ pci_dma_sync_single_for_cpu(pdev,
rxdr->buffer_info[l].dma,
rxdr->buffer_info[l].length,
PCI_DMA_FROMDEVICE);
-
+
ret_val = e1000_check_lbtest_frame(
rxdr->buffer_info[l].skb,
1024);
- if(!ret_val)
+ if (!ret_val)
good_cnt++;
- if(unlikely(++l == rxdr->count)) l = 0;
- /* time + 20 msecs (200 msecs on 2.4) is more than
- * enough time to complete the receives, if it's
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
* exceeded, break and error off
*/
} while (good_cnt < 64 && jiffies < (time + 20));
- if(good_cnt != 64) {
+ if (good_cnt != 64) {
ret_val = 13; /* ret_val is the same as mis-compare */
- break;
+ break;
}
- if(jiffies >= (time + 2)) {
+ if (jiffies >= (time + 2)) {
ret_val = 14; /* error code for time out error */
break;
}
*data = 1;
} else {
e1000_check_for_link(&adapter->hw);
- if(adapter->hw.autoneg) /* if auto_neg is set wait for it */
+ if (adapter->hw.autoneg) /* if auto_neg is set wait for it */
msec_delay(4000);
- if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
+ if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
*data = 1;
}
}
return *data;
}
-static int
+static int
e1000_diag_test_count(struct net_device *netdev)
{
return E1000_TEST_LEN;
struct e1000_adapter *adapter = netdev_priv(netdev);
boolean_t if_running = netif_running(netdev);
- if(eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
/* save speed, duplex, autoneg settings */
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
- if(e1000_link_test(adapter, &data[4]))
+ if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
- if(if_running)
+ if (if_running)
e1000_down(adapter);
else
e1000_reset(adapter);
- if(e1000_reg_test(adapter, &data[0]))
+ if (e1000_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
e1000_reset(adapter);
- if(e1000_eeprom_test(adapter, &data[1]))
+ if (e1000_eeprom_test(adapter, &data[1]))
eth_test->flags |= ETH_TEST_FL_FAILED;
e1000_reset(adapter);
- if(e1000_intr_test(adapter, &data[2]))
+ if (e1000_intr_test(adapter, &data[2]))
eth_test->flags |= ETH_TEST_FL_FAILED;
e1000_reset(adapter);
- if(e1000_loopback_test(adapter, &data[3]))
+ if (e1000_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
/* restore speed, duplex, autoneg settings */
adapter->hw.autoneg = autoneg;
e1000_reset(adapter);
- if(if_running)
+ if (if_running)
e1000_up(adapter);
} else {
/* Online tests */
- if(e1000_link_test(adapter, &data[4]))
+ if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
/* Offline tests aren't run; pass by default */
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- switch(adapter->hw.device_id) {
+ switch (adapter->hw.device_id) {
case E1000_DEV_ID_82542:
case E1000_DEV_ID_82543GC_FIBER:
case E1000_DEV_ID_82543GC_COPPER:
case E1000_DEV_ID_82546EB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
wol->supported = 0;
wol->wolopts = 0;
return;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a) {
+ wol->supported = 0;
+ return;
+ }
+ /* KSP3 does not suppport UCAST wake-ups for any interface */
+ wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ wol->wolopts = 0;
+ goto do_defaults;
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
/* Wake events only supported on port A for dual fiber */
- if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
+ if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
wol->supported = 0;
wol->wolopts = 0;
return;
default:
wol->supported = WAKE_UCAST | WAKE_MCAST |
WAKE_BCAST | WAKE_MAGIC;
-
wol->wolopts = 0;
- if(adapter->wol & E1000_WUFC_EX)
+
+do_defaults:
+ if (adapter->wol & E1000_WUFC_EX)
wol->wolopts |= WAKE_UCAST;
- if(adapter->wol & E1000_WUFC_MC)
+ if (adapter->wol & E1000_WUFC_MC)
wol->wolopts |= WAKE_MCAST;
- if(adapter->wol & E1000_WUFC_BC)
+ if (adapter->wol & E1000_WUFC_BC)
wol->wolopts |= WAKE_BCAST;
- if(adapter->wol & E1000_WUFC_MAG)
+ if (adapter->wol & E1000_WUFC_MAG)
wol->wolopts |= WAKE_MAGIC;
return;
}
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- switch(adapter->hw.device_id) {
+ switch (adapter->hw.device_id) {
case E1000_DEV_ID_82542:
case E1000_DEV_ID_82543GC_FIBER:
case E1000_DEV_ID_82543GC_COPPER:
case E1000_DEV_ID_82544EI_FIBER:
case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
return wol->wolopts ? -EOPNOTSUPP : 0;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a)
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
/* Wake events only supported on port A for dual fiber */
- if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
+ if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
return wol->wolopts ? -EOPNOTSUPP : 0;
/* Fall Through */
default:
- if(wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
adapter->wol = 0;
- if(wol->wolopts & WAKE_UCAST)
+ if (wol->wolopts & WAKE_UCAST)
adapter->wol |= E1000_WUFC_EX;
- if(wol->wolopts & WAKE_MCAST)
+ if (wol->wolopts & WAKE_MCAST)
adapter->wol |= E1000_WUFC_MC;
- if(wol->wolopts & WAKE_BCAST)
+ if (wol->wolopts & WAKE_BCAST)
adapter->wol |= E1000_WUFC_BC;
- if(wol->wolopts & WAKE_MAGIC)
+ if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= E1000_WUFC_MAG;
}
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
- if(test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
e1000_led_off(&adapter->hw);
else
e1000_led_on(&adapter->hw);
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
+ if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
- if(adapter->hw.mac_type < e1000_82571) {
- if(!adapter->blink_timer.function) {
+ if (adapter->hw.mac_type < e1000_82571) {
+ if (!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
adapter->blink_timer.function = e1000_led_blink_callback;
adapter->blink_timer.data = (unsigned long) adapter;
e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if(netif_running(netdev)) {
+ if (netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
}
return 0;
}
-static int
+static int
e1000_get_stats_count(struct net_device *netdev)
{
return E1000_STATS_LEN;
}
-static void
-e1000_get_ethtool_stats(struct net_device *netdev,
+static void
+e1000_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_E1000_MQ
- uint64_t *queue_stat;
- int stat_count = sizeof(struct e1000_queue_stats) / sizeof(uint64_t);
- int j, k;
-#endif
int i;
e1000_update_stats(adapter);
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
}
-#ifdef CONFIG_E1000_MQ
- for (j = 0; j < adapter->num_tx_queues; j++) {
- queue_stat = (uint64_t *)&adapter->tx_ring[j].tx_stats;
- for (k = 0; k < stat_count; k++)
- data[i + k] = queue_stat[k];
- i += k;
- }
- for (j = 0; j < adapter->num_rx_queues; j++) {
- queue_stat = (uint64_t *)&adapter->rx_ring[j].rx_stats;
- for (k = 0; k < stat_count; k++)
- data[i + k] = queue_stat[k];
- i += k;
- }
-#endif
/* BUG_ON(i != E1000_STATS_LEN); */
}
-static void
+static void
e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
{
-#ifdef CONFIG_E1000_MQ
- struct e1000_adapter *adapter = netdev_priv(netdev);
-#endif
uint8_t *p = data;
int i;
- switch(stringset) {
+ switch (stringset) {
case ETH_SS_TEST:
- memcpy(data, *e1000_gstrings_test,
+ memcpy(data, *e1000_gstrings_test,
E1000_TEST_LEN*ETH_GSTRING_LEN);
break;
case ETH_SS_STATS:
ETH_GSTRING_LEN);
p += ETH_GSTRING_LEN;
}
-#ifdef CONFIG_E1000_MQ
- for (i = 0; i < adapter->num_tx_queues; i++) {
- sprintf(p, "tx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- sprintf(p, "rx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
-#endif
/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
break;
}
projects / linux-2.6-omap-h63xx.git / blobdiff