e1000: Remove unneeded and unwanted memsets

[linux-2.6-omap-h63xx.git] / drivers / net / e1000 / e1000_hw.h

diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 112447fd8bf2d558f66a6de96559e2b9cac15db3..f247f264a57b7b83e255a44647d0844f2997d238 100644 (file)
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -128,11 +128,13 @@ typedef enum {
 /* PCI bus widths */
 typedef enum {
     e1000_bus_width_unknown = 0,
+    /* These PCIe values should literally match the possible return values
+     * from config space */
+    e1000_bus_width_pciex_1 = 1,
+    e1000_bus_width_pciex_2 = 2,
+    e1000_bus_width_pciex_4 = 4,
     e1000_bus_width_32,
     e1000_bus_width_64,
-    e1000_bus_width_pciex_1,
-    e1000_bus_width_pciex_2,
-    e1000_bus_width_pciex_4,
     e1000_bus_width_reserved
 } e1000_bus_width;
 
@@ -326,6 +328,7 @@ int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
+
 void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
 
 /* EEPROM Functions */
@@ -390,7 +393,6 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
                                   uint16_t length);
 boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
 boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-
 int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
 int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
 int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw);
@@ -576,6 +578,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
  * E1000_RAR_ENTRIES - 1 multicast addresses.
  */
 #define E1000_RAR_ENTRIES 15
+
 #define E1000_RAR_ENTRIES_ICH8LAN  6
 
 #define MIN_NUMBER_OF_DESCRIPTORS  8
@@ -1335,9 +1338,9 @@ struct e1000_hw_stats {
     uint64_t gotch;
     uint64_t rnbc;
     uint64_t ruc;
+    uint64_t rfc;
     uint64_t roc;
     uint64_t rlerrc;
-    uint64_t rfc;
     uint64_t rjc;
     uint64_t mgprc;
     uint64_t mgpdc;
@@ -1961,9 +1964,9 @@ struct e1000_hw {
 #define E1000_RXDCTL_GRAN    0x01000000 /* RXDCTL Granularity */
 
 /* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
 #define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
 #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
 #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
@@ -3172,6 +3175,7 @@ struct e1000_host_command_info {
 #define IGP3_VR_CTRL \
         PHY_REG(776, 18) /* Voltage regulator control register */
 #define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK       0x0300 /* Shutdown VR Mask */
 
 #define IGP3_CAPABILITY \
         PHY_REG(776, 19) /* IGP3 Capability Register */