Information and updates available at
http://www.scyld.com/network/epic100.html
+ [this link no longer provides anything useful -jgarzik]
---------------------------------------------------------------------
- Linux kernel-specific changes:
-
- LK1.1.2 (jgarzik):
- * Merge becker version 1.09 (4/08/2000)
-
- LK1.1.3:
- * Major bugfix to 1.09 driver (Francis Romieu)
-
- LK1.1.4 (jgarzik):
- * Merge becker test version 1.09 (5/29/2000)
-
- LK1.1.5:
- * Fix locking (jgarzik)
- * Limit 83c175 probe to ethernet-class PCI devices (rgooch)
-
- LK1.1.6:
- * Merge becker version 1.11
- * Move pci_enable_device before any PCI BAR len checks
-
- LK1.1.7:
- * { fill me in }
-
- LK1.1.8:
- * ethtool driver info support (jgarzik)
-
- LK1.1.9:
- * ethtool media get/set support (jgarzik)
-
- LK1.1.10:
- * revert MII transceiver init change (jgarzik)
-
- LK1.1.11:
- * implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik)
- * replace some MII-related magic numbers with constants
-
- LK1.1.12:
- * fix power-up sequence
-
- LK1.1.13:
- * revert version 1.1.12, power-up sequence "fix"
-
- LK1.1.14 (Kryzsztof Halasa):
- * fix spurious bad initializations
- * pound phy a la SMSC's app note on the subject
-
- AC1.1.14ac
- * fix power up/down for ethtool that broke in 1.11
-
*/
#define DRV_NAME "epic100"
-#define DRV_VERSION "1.11+LK1.1.14+AC1.1.14"
-#define DRV_RELDATE "June 2, 2004"
+#define DRV_VERSION "2.0"
+#define DRV_RELDATE "June 27, 2006"
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
#define TX_FIFO_THRESH 256
#define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
struct epic_chip_info {
const char *name;
- int io_size; /* Needed for I/O region check or ioremap(). */
int drv_flags; /* Driver use, intended as capability flags. */
};
/* indexed by chip_t */
static const struct epic_chip_info pci_id_tbl[] = {
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN },
- { "SMSC EPIC/100 83c170",
- EPIC_TOTAL_SIZE, TYPE2_INTR },
- { "SMSC EPIC/C 83c175",
- EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
+ { "SMSC EPIC/100 83c170", TYPE2_INTR },
+ { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
};
goto out;
irq = pdev->irq;
- if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) {
- printk (KERN_ERR "card %d: no PCI region space\n", card_idx);
+ if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
+ dev_err(&pdev->dev, "no PCI region space\n");
ret = -ENODEV;
goto err_out_disable;
}
dev = alloc_etherdev(sizeof (*ep));
if (!dev) {
- printk (KERN_ERR "card %d: no memory for eth device\n", card_idx);
+ dev_err(&pdev->dev, "no memory for eth device\n");
goto err_out_free_res;
}
SET_MODULE_OWNER(dev);
ioaddr = pci_resource_start (pdev, 1);
ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
if (!ioaddr) {
- printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx);
+ dev_err(&pdev->dev, "ioremap failed\n");
goto err_out_free_netdev;
}
#endif
((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4));
if (debug > 2) {
- printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n",
- pci_name(pdev));
+ dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
for (i = 0; i < 64; i++)
printk(" %4.4x%s", read_eeprom(ioaddr, i),
i % 16 == 15 ? "\n" : "");
int mii_status = mdio_read(dev, phy, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
ep->phys[phy_idx++] = phy;
- printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control "
- "%4.4x status %4.4x.\n",
- pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status);
+ dev_info(&pdev->dev,
+ "MII transceiver #%d control "
+ "%4.4x status %4.4x.\n",
+ phy, mdio_read(dev, phy, 0), mii_status);
}
}
ep->mii_phy_cnt = phy_idx;
if (phy_idx != 0) {
phy = ep->phys[0];
ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
- printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link "
+ dev_info(&pdev->dev,
+ "Autonegotiation advertising %4.4x link "
"partner %4.4x.\n",
- pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5));
+ ep->mii.advertising, mdio_read(dev, phy, 5));
} else if ( ! (ep->chip_flags & NO_MII)) {
- printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n",
- pci_name(pdev));
+ dev_warn(&pdev->dev,
+ "***WARNING***: No MII transceiver found!\n");
/* Use the known PHY address of the EPII. */
ep->phys[0] = 3;
}
/* The lower four bits are the media type. */
if (duplex) {
ep->mii.force_media = ep->mii.full_duplex = 1;
- printk(KERN_INFO DRV_NAME "(%s): Forced full duplex operation requested.\n",
- pci_name(pdev));
+ dev_info(&pdev->dev, "Forced full duplex requested.\n");
}
dev->if_port = ep->default_port = option;
/* Soft reset the chip. */
outl(0x4001, ioaddr + GENCTL);
- if ((retval = request_irq(dev->irq, &epic_interrupt, SA_SHIRQ, dev->name, dev)))
+ if ((retval = request_irq(dev->irq, &epic_interrupt, IRQF_SHARED, dev->name, dev)))
return retval;
epic_init_ring(dev);
projects / linux-2.6-omap-h63xx.git / blobdiff