igb: read address from RAH/RAL instead of from EEPROM

[linux-2.6-omap-h63xx.git] / drivers / net / igb / e1000_defines.h

diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index ce700689fb57a0ecd09711de176dab632754856a..54a1489233867404fcb5ca4be7fc1899fced8328 100644 (file)
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -168,18 +168,12 @@
 #define E1000_RCTL_RDMTS_HALF     0x00000000    /* rx desc min threshold size */
 #define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
 #define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
 #define E1000_RCTL_SZ_2048        0x00000000    /* rx buffer size 2048 */
 #define E1000_RCTL_SZ_1024        0x00010000    /* rx buffer size 1024 */
 #define E1000_RCTL_SZ_512         0x00020000    /* rx buffer size 512 */
 #define E1000_RCTL_SZ_256         0x00030000    /* rx buffer size 256 */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384       0x00010000    /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192        0x00020000    /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096        0x00030000    /* rx buffer size 4096 */
 #define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
 #define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
-#define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
 #define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
 
 /*
@@ -329,6 +323,7 @@
 #define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
 #define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
 #define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
 /* Extended desc bits for Linksec and timesync */
 
 /* Transmit Control */
@@ -486,6 +481,8 @@
  * manageability enabled, allowing us room for 15 multicast addresses.
  */
 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
 
 /* Error Codes */
 #define E1000_ERR_NVM      1