bool autoneg,
bool autoneg_wait_to_complete);
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up);
static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
bool autoneg,
bool autoneg_wait_to_complete);
hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
+ /* PHY ops are filled in by default properly for Fiber only */
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
+ hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
+ hw->mac.ops.get_link_settings =
+ &ixgbe_get_copper_link_settings_82598;
+
+ /* Call PHY identify routine to get the phy type */
+ ixgbe_identify_phy(hw);
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
+ hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
+ hw->phy.ops.setup_link_speed =
+ &ixgbe_setup_tnx_phy_link_speed;
+ break;
+ default:
+ break;
+ }
+ }
+
return 0;
}
autoc_reg |= hw->mac.link_mode_select;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ IXGBE_WRITE_FLUSH(hw);
msleep(50);
}
* ixgbe_hw This will write the AUTOC register based on the new
* stored values
*/
- hw->phy.ops.setup(hw);
+ hw->mac.ops.setup_link(hw);
}
return status;
**/
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
{
- s32 status;
- u32 speed = 0;
- bool link_up = false;
-
- /* Set up MAC */
- hw->phy.ops.setup(hw);
+ s32 status = 0;
/* Restart autonegotiation on PHY */
- status = hw->phy.ops.setup(hw);
-
- /* Synchronize MAC to PHY speed */
- if (status == 0)
- status = hw->phy.ops.check(hw, &speed, &link_up);
-
- return status;
-}
+ if (hw->phy.ops.setup_link)
+ status = hw->phy.ops.setup_link(hw);
-/**
- * ixgbe_check_copper_link_82598 - Syncs MAC & PHY link settings
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true if link is up, false otherwise
- *
- * Reads the mac link, phy link, and synchronizes the MAC to PHY.
- **/
-static s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up)
-{
- s32 status;
- u32 phy_speed = 0;
- bool phy_link = false;
+ /* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
+ hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
+ hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
- /* This is the speed and link the MAC is set at */
- hw->phy.ops.check(hw, speed, link_up);
-
- /*
- * Check current speed and link status of the PHY register.
- * This is a vendor specific register and may have to
- * be changed for other copper PHYs.
- */
- status = hw->phy.ops.check(hw, &phy_speed, &phy_link);
-
- if ((status == 0) && (phy_link)) {
- /*
- * Check current link status of the MACs link's register
- * matches that of the speed in the PHY register
- */
- if (*speed != phy_speed) {
- /*
- * The copper PHY requires 82598 attach type to be XAUI
- * for 10G and BX for 1G
- */
- hw->mac.link_attach_type =
- (IXGBE_AUTOC_10G_XAUI | IXGBE_AUTOC_1G_BX);
-
- /* Synchronize the MAC speed to the PHY speed */
- status = hw->phy.ops.setup_speed(hw, phy_speed, false,
- false);
- if (status == 0)
- hw->phy.ops.check(hw, speed, link_up);
- else
- status = IXGBE_ERR_LINK_SETUP;
- }
- } else {
- *link_up = phy_link;
- }
+ /* Set up MAC */
+ hw->mac.ops.setup_link(hw);
return status;
}
bool autoneg,
bool autoneg_wait_to_complete)
{
- s32 status;
- bool link_up = 0;
+ s32 status = 0;
/* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
+ if (hw->phy.ops.setup_link_speed)
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+
+ /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
+ hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
+ hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
- /* Synchronize MAC to PHY speed */
- if (status == 0)
- status = hw->phy.ops.check(hw, &speed, &link_up);
+ /* Set up MAC */
+ hw->mac.ops.setup_link(hw);
return status;
}
static struct ixgbe_mac_operations mac_ops_82598 = {
.reset = &ixgbe_reset_hw_82598,
.get_media_type = &ixgbe_get_media_type_82598,
+ .setup_link = &ixgbe_setup_mac_link_82598,
+ .check_link = &ixgbe_check_mac_link_82598,
+ .setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
+ .get_link_settings = &ixgbe_get_link_settings_82598,
};
-static struct ixgbe_phy_operations phy_ops_82598EB = {
- .setup = &ixgbe_setup_copper_link_82598,
- .check = &ixgbe_check_copper_link_82598,
- .setup_speed = &ixgbe_setup_copper_link_speed_82598,
- .get_settings = &ixgbe_get_copper_link_settings_82598,
-};
-
-struct ixgbe_info ixgbe_82598EB_info = {
- .mac = ixgbe_mac_82598EB,
- .get_invariants = &ixgbe_get_invariants_82598,
- .mac_ops = &mac_ops_82598,
- .phy_ops = &phy_ops_82598EB,
-};
-
-static struct ixgbe_phy_operations phy_ops_82598AT = {
- .setup = &ixgbe_setup_tnx_phy_link,
- .check = &ixgbe_check_tnx_phy_link,
- .setup_speed = &ixgbe_setup_tnx_phy_link_speed,
- .get_settings = &ixgbe_get_copper_link_settings_82598,
-};
-
-struct ixgbe_info ixgbe_82598AT_info = {
- .mac = ixgbe_mac_82598EB,
- .get_invariants = &ixgbe_get_invariants_82598,
- .mac_ops = &mac_ops_82598,
- .phy_ops = &phy_ops_82598AT,
-};
-
-static struct ixgbe_phy_operations phy_ops_82598AF = {
- .setup = &ixgbe_setup_mac_link_82598,
- .check = &ixgbe_check_mac_link_82598,
- .setup_speed = &ixgbe_setup_mac_link_speed_82598,
- .get_settings = &ixgbe_get_link_settings_82598,
-};
-
-struct ixgbe_info ixgbe_82598AF_info = {
+struct ixgbe_info ixgbe_82598_info = {
.mac = ixgbe_mac_82598EB,
.get_invariants = &ixgbe_get_invariants_82598,
.mac_ops = &mac_ops_82598,
- .phy_ops = &phy_ops_82598AF,
};
projects / linux-2.6-omap-h63xx.git / blobdiff