pci: use pci_ioremap_bar() in drivers/ide

[linux-2.6-omap-h63xx.git] / drivers / net / ixgbe / ixgbe_phy.h

diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 199e8f670f3a589cd50a680cdcc2869263e4b36a..9bfe3f2b1d8f499f743890a846790150b9c5757a 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2007 Intel Corporation.
+  Copyright(c) 1999 - 2008 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,6 @@
   the file called "COPYING".
 
   Contact Information:
-  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
@@ -30,21 +29,52 @@
 #define _IXGBE_PHY_H_
 
 #include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR    0xA0
 
-s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw);
-s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
-s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up);
-s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg,
-                              bool autoneg_wait_to_complete);
-s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
-s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
-s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
-                              u32 device_type, u16 *phy_data);
-
-/* PHY specific */
-s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw);
-s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up);
-s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg,
-                                 bool autoneg_wait_to_complete);
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER         0x0
+#define IXGBE_SFF_IDENTIFIER_SFP     0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0   0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1   0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
+#define IXGBE_SFF_1GBE_COMP_CODES    0x6
+#define IXGBE_SFF_10GBE_COMP_CODES   0x3
+#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+
+/* Bitmasks */
+#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_1GBASESX_CAPABLE           0x1
+#define IXGBE_SFF_10GBASESR_CAPABLE          0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE          0x20
+#define IXGBE_I2C_EEPROM_READ_MASK           0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK         0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS         0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL         0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS  0x3
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT    12
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT    8
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT    4
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO     0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL      0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO    0x00176A00
+
+
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+                               u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+                                u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+                                       ixgbe_link_speed speed,
+                                       bool autoneg,
+                                       bool autoneg_wait_to_complete);
 
 #endif /* _IXGBE_PHY_H_ */