#define DRV_NAME "ne3210"
-static int ne3210_open(struct net_device *dev);
-static int ne3210_close(struct net_device *dev);
-
static void ne3210_reset_8390(struct net_device *dev);
static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
return -ENOMEM;
}
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, device);
device->driver_data = dev;
ioaddr = edev->base_addr;
inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
#endif
-
port_index = inb(ioaddr + NE3210_CFG2) >> 6;
- printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr:",
- edev->slot, ifmap[port_index]);
for(i = 0; i < ETHER_ADDR_LEN; i++)
- printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
-
+ dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
+ printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
+ edev->slot, ifmap[port_index], dev->dev_addr);
/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
- printk(".\nne3210.c: using IRQ %d, ", dev->irq);
+ printk("ne3210.c: using IRQ %d, ", dev->irq);
retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
if (retval) {
ei_status.block_output = &ne3210_block_output;
ei_status.get_8390_hdr = &ne3210_get_8390_hdr;
- dev->open = &ne3210_open;
- dev->stop = &ne3210_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ei_poll;
-#endif
+ dev->netdev_ops = &ei_netdev_ops;
+
dev->if_port = ifmap_val[port_index];
if ((retval = register_netdev (dev)))
memcpy_toio(shmem, buf, count);
}
-static int ne3210_open(struct net_device *dev)
-{
- ei_open(dev);
- return 0;
-}
-
-static int ne3210_close(struct net_device *dev)
-{
-
- if (ei_debug > 1)
- printk("%s: Shutting down ethercard.\n", dev->name);
-
- ei_close(dev);
- return 0;
-}
-
static struct eisa_device_id ne3210_ids[] = {
{ "EGL0101" },
{ "NVL1801" },