/*
- * drivers/net/phy/fixed.c
+ * Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
*
- * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
*
- * Author: Vitaly Bordug
- *
- * Copyright (c) 2006 MontaVista Software, Inc.
+ * Copyright (c) 2006-2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
*/
+
#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
#include <linux/mii.h>
-#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
+#define MII_REGS_NUM 29
-#define MII_REGS_NUM 7
-
-/*
- The idea is to emulate normal phy behavior by responding with
- pre-defined values to mii BMCR read, so that read_status hook could
- take all the needed info.
-*/
-
-struct fixed_phy_status {
- u8 link;
- u16 speed;
- u8 duplex;
+struct fixed_mdio_bus {
+ int irqs[PHY_MAX_ADDR];
+ struct mii_bus mii_bus;
+ struct list_head phys;
};
-/*-----------------------------------------------------------------------------
- * Private information hoder for mii_bus
- *-----------------------------------------------------------------------------*/
-struct fixed_info {
- u16 *regs;
- u8 regs_num;
- struct fixed_phy_status phy_status;
- struct phy_device *phydev; /* pointer to the container */
- /* link & speed cb */
- int(*link_update)(struct net_device*, struct fixed_phy_status*);
-
+struct fixed_phy {
+ int id;
+ u16 regs[MII_REGS_NUM];
+ struct phy_device *phydev;
+ struct fixed_phy_status status;
+ int (*link_update)(struct net_device *, struct fixed_phy_status *);
+ struct list_head node;
};
-/*-----------------------------------------------------------------------------
- * If something weird is required to be done with link/speed,
- * network driver is able to assign a function to implement this.
- * May be useful for PHY's that need to be software-driven.
- *-----------------------------------------------------------------------------*/
-int fixed_mdio_set_link_update(struct phy_device* phydev,
- int(*link_update)(struct net_device*, struct fixed_phy_status*))
-{
- struct fixed_info *fixed;
-
- if(link_update == NULL)
- return -EINVAL;
-
- if(phydev) {
- if(phydev->bus) {
- fixed = phydev->bus->priv;
- fixed->link_update = link_update;
- return 0;
- }
- }
- return -EINVAL;
-}
-EXPORT_SYMBOL(fixed_mdio_set_link_update);
+static struct platform_device *pdev;
+static struct fixed_mdio_bus platform_fmb = {
+ .phys = LIST_HEAD_INIT(platform_fmb.phys),
+};
-/*-----------------------------------------------------------------------------
- * This is used for updating internal mii regs from the status
- *-----------------------------------------------------------------------------*/
-static int fixed_mdio_update_regs(struct fixed_info *fixed)
+static int fixed_phy_update_regs(struct fixed_phy *fp)
{
- u16 *regs = fixed->regs;
- u16 bmsr = 0;
+ u16 bmsr = BMSR_ANEGCAPABLE;
u16 bmcr = 0;
+ u16 lpagb = 0;
+ u16 lpa = 0;
- if(!regs) {
- printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
- return -EINVAL;
- }
-
- if(fixed->phy_status.link)
- bmsr |= BMSR_LSTATUS;
-
- if(fixed->phy_status.duplex) {
+ if (fp->status.duplex) {
bmcr |= BMCR_FULLDPLX;
- switch ( fixed->phy_status.speed ) {
+ switch (fp->status.speed) {
+ case 1000:
+ bmsr |= BMSR_ESTATEN;
+ bmcr |= BMCR_SPEED1000;
+ lpagb |= LPA_1000FULL;
+ break;
case 100:
bmsr |= BMSR_100FULL;
bmcr |= BMCR_SPEED100;
- break;
-
+ lpa |= LPA_100FULL;
+ break;
case 10:
bmsr |= BMSR_10FULL;
- break;
+ lpa |= LPA_10FULL;
+ break;
+ default:
+ printk(KERN_WARNING "fixed phy: unknown speed\n");
+ return -EINVAL;
}
} else {
- switch ( fixed->phy_status.speed ) {
+ switch (fp->status.speed) {
+ case 1000:
+ bmsr |= BMSR_ESTATEN;
+ bmcr |= BMCR_SPEED1000;
+ lpagb |= LPA_1000HALF;
+ break;
case 100:
bmsr |= BMSR_100HALF;
bmcr |= BMCR_SPEED100;
- break;
-
+ lpa |= LPA_100HALF;
+ break;
case 10:
- bmsr |= BMSR_100HALF;
- break;
+ bmsr |= BMSR_10HALF;
+ lpa |= LPA_10HALF;
+ break;
+ default:
+ printk(KERN_WARNING "fixed phy: unknown speed\n");
+ return -EINVAL;
}
}
- regs[MII_BMCR] = bmcr;
- regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx*/
+ if (fp->status.link)
+ bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
+ if (fp->status.pause)
+ lpa |= LPA_PAUSE_CAP;
+
+ if (fp->status.asym_pause)
+ lpa |= LPA_PAUSE_ASYM;
+
+ fp->regs[MII_PHYSID1] = fp->id >> 16;
+ fp->regs[MII_PHYSID2] = fp->id;
+
+ fp->regs[MII_BMSR] = bmsr;
+ fp->regs[MII_BMCR] = bmcr;
+ fp->regs[MII_LPA] = lpa;
+ fp->regs[MII_STAT1000] = lpagb;
return 0;
}
-static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
+static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
{
- struct fixed_info *fixed = bus->priv;
-
- /* if user has registered link update callback, use it */
- if(fixed->phydev)
- if(fixed->phydev->attached_dev) {
- if(fixed->link_update) {
- fixed->link_update(fixed->phydev->attached_dev,
- &fixed->phy_status);
- fixed_mdio_update_regs(fixed);
- }
- }
+ struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus,
+ mii_bus);
+ struct fixed_phy *fp;
- if ((unsigned int)location >= fixed->regs_num)
+ if (reg_num >= MII_REGS_NUM)
return -1;
- return fixed->regs[location];
-}
-static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val)
-{
- /* do nothing for now*/
- return 0;
-}
+ list_for_each_entry(fp, &fmb->phys, node) {
+ if (fp->id == phy_id) {
+ /* Issue callback if user registered it. */
+ if (fp->link_update) {
+ fp->link_update(fp->phydev->attached_dev,
+ &fp->status);
+ fixed_phy_update_regs(fp);
+ }
+ return fp->regs[reg_num];
+ }
+ }
-static int fixed_mii_reset(struct mii_bus *bus)
-{
- /*nothing here - no way/need to reset it*/
- return 0;
+ return 0xFFFF;
}
-static int fixed_config_aneg(struct phy_device *phydev)
+static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
+ u16 val)
{
- /* :TODO:03/13/2006 09:45:37 PM::
- The full autoneg funcionality can be emulated,
- but no need to have anything here for now
- */
return 0;
}
-/*-----------------------------------------------------------------------------
- * the manual bind will do the magic - with phy_id_mask == 0
- * match will never return true...
- *-----------------------------------------------------------------------------*/
-static struct phy_driver fixed_mdio_driver = {
- .name = "Fixed PHY",
- .features = PHY_BASIC_FEATURES,
- .config_aneg = fixed_config_aneg,
- .read_status = genphy_read_status,
- .driver = { .owner = THIS_MODULE,},
-};
-
-/*-----------------------------------------------------------------------------
- * This func is used to create all the necessary stuff, bind
- * the fixed phy driver and register all it on the mdio_bus_type.
- * speed is either 10 or 100, duplex is boolean.
- * number is used to create multiple fixed PHYs, so that several devices can
- * utilize them simultaneously.
- *-----------------------------------------------------------------------------*/
-static int fixed_mdio_register_device(int number, int speed, int duplex)
+/*
+ * If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ */
+int fixed_phy_set_link_update(struct phy_device *phydev,
+ int (*link_update)(struct net_device *,
+ struct fixed_phy_status *))
{
- struct mii_bus *new_bus;
- struct fixed_info *fixed;
- struct phy_device *phydev;
- int err = 0;
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp;
- struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+ if (!link_update || !phydev || !phydev->bus)
+ return -EINVAL;
- if (NULL == dev)
- return -ENOMEM;
+ list_for_each_entry(fp, &fmb->phys, node) {
+ if (fp->id == phydev->phy_id) {
+ fp->link_update = link_update;
+ fp->phydev = phydev;
+ return 0;
+ }
+ }
- new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
- if (NULL == new_bus) {
- kfree(dev);
- return -ENOMEM;
- }
- fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
+int fixed_phy_add(unsigned int irq, int phy_id,
+ struct fixed_phy_status *status)
+{
+ int ret;
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp;
- if (NULL == fixed) {
- kfree(dev);
- kfree(new_bus);
+ fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+ if (!fp)
return -ENOMEM;
- }
- fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
- fixed->regs_num = MII_REGS_NUM;
- fixed->phy_status.speed = speed;
- fixed->phy_status.duplex = duplex;
- fixed->phy_status.link = 1;
-
- new_bus->name = "Fixed MII Bus",
- new_bus->read = &fixed_mii_read,
- new_bus->write = &fixed_mii_write,
- new_bus->reset = &fixed_mii_reset,
-
- /*set up workspace*/
- fixed_mdio_update_regs(fixed);
- new_bus->priv = fixed;
-
- new_bus->dev = dev;
- dev_set_drvdata(dev, new_bus);
-
- /* create phy_device and register it on the mdio bus */
- phydev = phy_device_create(new_bus, 0, 0);
-
- /*
- Put the phydev pointer into the fixed pack so that bus read/write code could
- be able to access for instance attached netdev. Well it doesn't have to do
- so, only in case of utilizing user-specified link-update...
- */
- fixed->phydev = phydev;
-
- if(NULL == phydev) {
- err = -ENOMEM;
- goto device_create_fail;
- }
+ memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
- phydev->irq = PHY_IGNORE_INTERRUPT;
- phydev->dev.bus = &mdio_bus_type;
-
- if(number)
- snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
- "fixed_%d@%d:%d", number, speed, duplex);
- else
- snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
- "fixed@%d:%d", speed, duplex);
- phydev->bus = new_bus;
-
- err = device_register(&phydev->dev);
- if(err) {
- printk(KERN_ERR "Phy %s failed to register\n",
- phydev->dev.bus_id);
- goto bus_register_fail;
- }
+ fmb->irqs[phy_id] = irq;
- /*
- the mdio bus has phy_id match... In order not to do it
- artificially, we are binding the driver here by hand;
- it will be the same for all the fixed phys anyway.
- */
- phydev->dev.driver = &fixed_mdio_driver.driver;
-
- err = phydev->dev.driver->probe(&phydev->dev);
- if(err < 0) {
- printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id);
- goto probe_fail;
- }
+ fp->id = phy_id;
+ fp->status = *status;
- err = device_bind_driver(&phydev->dev);
- if (err)
- goto probe_fail;
+ ret = fixed_phy_update_regs(fp);
+ if (ret)
+ goto err_regs;
- return 0;
+ list_add_tail(&fp->node, &fmb->phys);
-probe_fail:
- device_unregister(&phydev->dev);
-bus_register_fail:
- kfree(phydev);
-device_create_fail:
- kfree(dev);
- kfree(new_bus);
- kfree(fixed);
+ return 0;
- return err;
+err_regs:
+ kfree(fp);
+ return ret;
}
+EXPORT_SYMBOL_GPL(fixed_phy_add);
-
-MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
-MODULE_AUTHOR("Vitaly Bordug");
-MODULE_LICENSE("GPL");
-
-static int __init fixed_init(void)
+static int __init fixed_mdio_bus_init(void)
{
-#if 0
+ struct fixed_mdio_bus *fmb = &platform_fmb;
int ret;
- int duplex = 0;
-#endif
-
- /* register on the bus... Not expected to be matched with anything there... */
- phy_driver_register(&fixed_mdio_driver);
-
- /* So let the fun begin...
- We will create several mdio devices here, and will bound the upper
- driver to them.
- Then the external software can lookup the phy bus by searching
- fixed@speed:duplex, e.g. fixed@100:1, to be connected to the
- virtual 100M Fdx phy.
-
- In case several virtual PHYs required, the bus_id will be in form
- fixed_<num>@<speed>:<duplex>, which make it able even to define
- driver-specific link control callback, if for instance PHY is completely
- SW-driven.
-
- */
+ pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto err_pdev;
+ }
-#ifdef CONFIG_FIXED_MII_DUPLEX
-#if 0
- duplex = 1;
-#endif
-#endif
+ snprintf(fmb->mii_bus.id, MII_BUS_ID_SIZE, "0");
+ fmb->mii_bus.name = "Fixed MDIO Bus";
+ fmb->mii_bus.dev = &pdev->dev;
+ fmb->mii_bus.read = &fixed_mdio_read;
+ fmb->mii_bus.write = &fixed_mdio_write;
+ fmb->mii_bus.irq = fmb->irqs;
-#ifdef CONFIG_FIXED_MII_100_FDX
- fixed_mdio_register_device(0, 100, 1);
-#endif
+ ret = mdiobus_register(&fmb->mii_bus);
+ if (ret)
+ goto err_mdiobus_reg;
-#ifdef CONFIG_FIXED_MII_10_FDX
- fixed_mdio_register_device(0, 10, 1);
-#endif
return 0;
+
+err_mdiobus_reg:
+ platform_device_unregister(pdev);
+err_pdev:
+ return ret;
}
+module_init(fixed_mdio_bus_init);
-static void __exit fixed_exit(void)
+static void __exit fixed_mdio_bus_exit(void)
{
- phy_driver_unregister(&fixed_mdio_driver);
- /* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp, *tmp;
+
+ mdiobus_unregister(&fmb->mii_bus);
+ platform_device_unregister(pdev);
+
+ list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
+ list_del(&fp->node);
+ kfree(fp);
+ }
}
+module_exit(fixed_mdio_bus_exit);
-module_init(fixed_init);
-module_exit(fixed_exit);
+MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
+MODULE_AUTHOR("Vitaly Bordug");
+MODULE_LICENSE("GPL");
projects / linux-2.6-omap-h63xx.git / blobdiff