Revert "proc: revert /proc/uptime to ->read_proc hook"

[linux-2.6-omap-h63xx.git] / drivers / net / s2io.c

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index f5c57c059bca15c7d9e35f0b26c39fb0551bc718..16868b7a5d0aad2146b203200298d945947a631d 100644 (file)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2852,7 +2852,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget)
        s2io_chk_rx_buffers(nic, ring);
 
        if (pkts_processed < budget_org) {
-               netif_rx_complete(napi);
+               napi_complete(napi);
                /*Re Enable MSI-Rx Vector*/
                addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
                addr += 7 - ring->ring_no;
@@ -2889,7 +2889,7 @@ static int s2io_poll_inta(struct napi_struct *napi, int budget)
                        break;
        }
        if (pkts_processed < budget_org) {
-               netif_rx_complete(napi);
+               napi_complete(napi);
                /* Re enable the Rx interrupts for the ring */
                writeq(0, &bar0->rx_traffic_mask);
                readl(&bar0->rx_traffic_mask);
@@ -3862,7 +3862,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
        ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
        /* We fail init if error or we get less vectors than min required */
        if (ret) {
-               DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
+               DBG_PRINT(ERR_DBG, "s2io: Enabling MSI-X failed\n");
                kfree(nic->entries);
                nic->mac_control.stats_info->sw_stat.mem_freed
                        += (nic->num_entries * sizeof(struct msix_entry));
@@ -4342,7 +4342,7 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
                val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
                writeb(val8, addr);
                val8 = readb(addr);
-               netif_rx_schedule(&ring->napi);
+               napi_schedule(&ring->napi);
        } else {
                rx_intr_handler(ring, 0);
                s2io_chk_rx_buffers(sp, ring);
@@ -4789,7 +4789,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
 
                if (config->napi) {
                        if (reason & GEN_INTR_RXTRAFFIC) {
-                               netif_rx_schedule(&sp->napi);
+                               napi_schedule(&sp->napi);
                                writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
                                writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
                                readl(&bar0->rx_traffic_int);
@@ -7220,7 +7220,6 @@ static int s2io_card_up(struct s2io_nic * sp)
 
        /* Initialise napi */
        if (config->napi) {
-               int i;
                if (config->intr_type ==  MSI_X) {
                        for (i = 0; i < sp->config.rx_ring_num; i++)
                                napi_enable(&sp->mac_control.rings[i].napi);
@@ -7542,6 +7541,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
 
        sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
 send_up:
+       skb_record_rx_queue(skb, ring_no);
        queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
 aggregate:
        sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
@@ -8009,8 +8009,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
                if (ret) {
 
                        DBG_PRINT(ERR_DBG,
-                         "%s: MSI-X requested but failed to enable\n",
-                         dev->name);
+                         "s2io: MSI-X requested but failed to enable\n");
                        sp->config.intr_type = INTA;
                }
        }