#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.6"
+#define DRV_VERSION "2.0.26.17"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
{"mc_err_cnt"}
};
-#define S2IO_XENA_STAT_LEN sizeof(ethtool_xena_stats_keys)/ ETH_GSTRING_LEN
-#define S2IO_ENHANCED_STAT_LEN sizeof(ethtool_enhanced_stats_keys)/ \
- ETH_GSTRING_LEN
-#define S2IO_DRIVER_STAT_LEN sizeof(ethtool_driver_stats_keys)/ ETH_GSTRING_LEN
+#define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys)
+#define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys)
+#define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys)
#define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
#define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
#define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
#define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
-#define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
+#define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings)
#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
msleep(500);
val64 = readq(&bar0->sw_reset);
+ /* Ensure that it's safe to access registers by checking
+ * RIC_RUNNING bit is reset. Check is valid only for XframeII.
+ */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ for (i = 0; i < 50; i++) {
+ val64 = readq(&bar0->adapter_status);
+ if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
+ break;
+ msleep(10);
+ }
+ if (i == 50)
+ return -ENODEV;
+ }
+
/* Enable Receiving broadcasts */
add = &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int i;
- if (!is_s2io_card_up(nic))
- return 0;
-
mac_control = &nic->mac_control;
config = &nic->config;
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
+ /* restore mac_addr entries */
+ do_s2io_restore_unicast_mc(sp);
+
/* Restore the MSIX table entries from local variables */
restore_xmsi_data(sp);
writeq(val64, &bar0->pcc_err_reg);
}
- /* restore the previously assigned mac address */
- do_s2io_prog_unicast(sp->dev, (u8 *)&sp->def_mac_addr[0].mac_addr);
-
sp->device_enabled_once = FALSE;
}
}
/* Handle software interrupt used during MSI(X) test */
-static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id)
+static irqreturn_t s2io_test_intr(int irq, void *dev_id)
{
struct s2io_nic *sp = dev_id;
}
/* Test interrupt path by forcing a a software IRQ */
-static int __devinit s2io_test_msi(struct s2io_nic *sp)
+static int s2io_test_msi(struct s2io_nic *sp)
{
struct pci_dev *pdev = sp->pdev;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
netif_carrier_off(dev);
sp->last_link_state = 0;
- napi_enable(&sp->napi);
-
if (sp->config.intr_type == MSI_X) {
int ret = s2io_enable_msi_x(sp);
return 0;
hw_init_failed:
- napi_disable(&sp->napi);
if (sp->config.intr_type == MSI_X) {
if (sp->entries) {
kfree(sp->entries);
static int s2io_close(struct net_device *dev)
{
struct s2io_nic *sp = dev->priv;
+ struct config_param *config = &sp->config;
+ u64 tmp64;
+ int offset;
/* Return if the device is already closed *
* Can happen when s2io_card_up failed in change_mtu *
return 0;
netif_stop_queue(dev);
- napi_disable(&sp->napi);
+
+ /* delete all populated mac entries */
+ for (offset = 1; offset < config->max_mc_addr; offset++) {
+ tmp64 = do_s2io_read_unicast_mc(sp, offset);
+ if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
+ do_s2io_delete_unicast_mc(sp, tmp64);
+ }
+
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
0xfeffffffffffULL;
- u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
+ u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
void __iomem *add;
+ struct config_param *config = &sp->config;
if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
/* Enable all Multicast addresses */
&bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
+ RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
S2IO_BIT_RESET);
sp->m_cast_flg = 1;
- sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
+ sp->all_multi_pos = config->max_mc_addr - 1;
} else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
/* Disable all Multicast addresses */
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
/* Update individual M_CAST address list */
if ((!sp->m_cast_flg) && dev->mc_count) {
if (dev->mc_count >
- (MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
+ (config->max_mc_addr - config->max_mac_addr)) {
DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
dev->name);
DBG_PRINT(ERR_DBG, "can be added, please enable ");
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
- (MAC_MC_ADDR_START_OFFSET + i);
+ (config->mc_start_offset + i);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
- (i + MAC_MC_ADDR_START_OFFSET);
+ (i + config->mc_start_offset);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
}
}
-/* add unicast MAC address to CAM */
-static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
+/* read from CAM unicast & multicast addresses and store it in
+ * def_mac_addr structure
+ */
+void do_s2io_store_unicast_mc(struct s2io_nic *sp)
+{
+ int offset;
+ u64 mac_addr = 0x0;
+ struct config_param *config = &sp->config;
+
+ /* store unicast & multicast mac addresses */
+ for (offset = 0; offset < config->max_mc_addr; offset++) {
+ mac_addr = do_s2io_read_unicast_mc(sp, offset);
+ /* if read fails disable the entry */
+ if (mac_addr == FAILURE)
+ mac_addr = S2IO_DISABLE_MAC_ENTRY;
+ do_s2io_copy_mac_addr(sp, offset, mac_addr);
+ }
+}
+
+/* restore unicast & multicast MAC to CAM from def_mac_addr structure */
+static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
+{
+ int offset;
+ struct config_param *config = &sp->config;
+ /* restore unicast mac address */
+ for (offset = 0; offset < config->max_mac_addr; offset++)
+ do_s2io_prog_unicast(sp->dev,
+ sp->def_mac_addr[offset].mac_addr);
+
+ /* restore multicast mac address */
+ for (offset = config->mc_start_offset;
+ offset < config->max_mc_addr; offset++)
+ do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
+}
+
+/* add a multicast MAC address to CAM */
+static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
+{
+ int i;
+ u64 mac_addr = 0;
+ struct config_param *config = &sp->config;
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ mac_addr <<= 8;
+ mac_addr |= addr[i];
+ }
+ if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
+ return SUCCESS;
+
+ /* check if the multicast mac already preset in CAM */
+ for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
+ u64 tmp64;
+ tmp64 = do_s2io_read_unicast_mc(sp, i);
+ if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
+ break;
+
+ if (tmp64 == mac_addr)
+ return SUCCESS;
+ }
+ if (i == config->max_mc_addr) {
+ DBG_PRINT(ERR_DBG,
+ "CAM full no space left for multicast MAC\n");
+ return FAILURE;
+ }
+ /* Update the internal structure with this new mac address */
+ do_s2io_copy_mac_addr(sp, i, mac_addr);
+
+ return (do_s2io_add_mac(sp, mac_addr, i));
+}
+
+/* add MAC address to CAM */
+static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
{
u64 val64;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
S2IO_BIT_RESET)) {
- DBG_PRINT(INFO_DBG, "add_mac_addr failed\n");
+ DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
return FAILURE;
}
return SUCCESS;
}
+/* deletes a specified unicast/multicast mac entry from CAM */
+static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
+{
+ int offset;
+ u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
+ struct config_param *config = &sp->config;
+
+ for (offset = 1;
+ offset < config->max_mc_addr; offset++) {
+ tmp64 = do_s2io_read_unicast_mc(sp, offset);
+ if (tmp64 == addr) {
+ /* disable the entry by writing 0xffffffffffffULL */
+ if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE)
+ return FAILURE;
+ /* store the new mac list from CAM */
+ do_s2io_store_unicast_mc(sp);
+ return SUCCESS;
+ }
+ }
+ DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
+ (unsigned long long)addr);
+ return FAILURE;
+}
+
+/* read mac entries from CAM */
+static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
+{
+ u64 tmp64 = 0xffffffffffff0000ULL, val64;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+
+ /* read mac addr */
+ val64 =
+ RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ RMAC_ADDR_CMD_MEM_OFFSET(offset);
+ writeq(val64, &bar0->rmac_addr_cmd_mem);
+
+ /* Wait till command completes */
+ if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET)) {
+ DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
+ return FAILURE;
+ }
+ tmp64 = readq(&bar0->rmac_addr_data0_mem);
+ return (tmp64 >> 16);
+}
/**
* s2io_set_mac_addr driver entry point
*/
+
static int s2io_set_mac_addr(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
/* store the MAC address in CAM */
return (do_s2io_prog_unicast(dev, dev->dev_addr));
}
-
/**
* do_s2io_prog_unicast - Programs the Xframe mac address
* @dev : pointer to the device structure.
* Return value: SUCCESS on success and an appropriate (-)ve integer
* as defined in errno.h file on failure.
*/
+
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
{
struct s2io_nic *sp = dev->priv;
register u64 mac_addr = 0, perm_addr = 0;
int i;
+ u64 tmp64;
+ struct config_param *config = &sp->config;
/*
* Set the new MAC address as the new unicast filter and reflect this
if (mac_addr == perm_addr)
return SUCCESS;
+ /* check if the mac already preset in CAM */
+ for (i = 1; i < config->max_mac_addr; i++) {
+ tmp64 = do_s2io_read_unicast_mc(sp, i);
+ if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
+ break;
+
+ if (tmp64 == mac_addr) {
+ DBG_PRINT(INFO_DBG,
+ "MAC addr:0x%llx already present in CAM\n",
+ (unsigned long long)mac_addr);
+ return SUCCESS;
+ }
+ }
+ if (i == config->max_mac_addr) {
+ DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
+ return FAILURE;
+ }
/* Update the internal structure with this new mac address */
- do_s2io_copy_mac_addr(sp, 0, mac_addr);
- return (do_s2io_add_unicast(sp, mac_addr, 0));
+ do_s2io_copy_mac_addr(sp, i, mac_addr);
+ return (do_s2io_add_mac(sp, mac_addr, i));
}
/**
struct XENA_dev_config __iomem *bar0 = sp->bar0;
unsigned long flags;
register u64 val64 = 0;
+ struct config_param *config;
+ config = &sp->config;
if (!is_s2io_card_up(sp))
return;
}
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
+ /* Disable napi */
+ if (config->napi)
+ napi_disable(&sp->napi);
+
/* disable Tx and Rx traffic on the NIC */
if (do_io)
stop_nic(sp);
DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
atomic_read(&sp->rx_bufs_left[i]));
}
+
+ /* Initialise napi */
+ if (config->napi)
+ napi_enable(&sp->napi);
+
/* Maintain the state prior to the open */
if (sp->promisc_flg)
sp->promisc_flg = 0;
*/
bar0 = sp->bar0;
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
+ RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
writeq(val64, &bar0->rmac_addr_cmd_mem);
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
+ /* initialize number of multicast & unicast MAC entries variables */
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
+ config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
+ config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
+ } else if (sp->device_type == XFRAME_II_DEVICE) {
+ config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
+ config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
+ config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
+ }
+
+ /* store mac addresses from CAM to s2io_nic structure */
+ do_s2io_store_unicast_mc(sp);
+
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */