/************************************************************************
- * s2io.c: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC
+ * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
* Copyright(c) 2002-2005 Neterion Inc.
* This software may be used and distributed according to the terms of
* explaination of all the variables.
* rx_ring_num : This can be used to program the number of receive rings used
* in the driver.
- * rx_ring_len: This defines the number of descriptors each ring can have. This
+ * rx_ring_sz: This defines the number of descriptors each ring can have. This
* is also an array of size 8.
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
* tx_fifo_len: This too is an array of 8. Each element defines the number of
#include <linux/ethtool.h>
#include <linux/version.h>
#include <linux/workqueue.h>
+#include <linux/if_vlan.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include "s2io.h"
#include "s2io-regs.h"
+#define DRV_VERSION "Version 2.0.9.1"
+
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
-static char s2io_driver_version[] = "Version 1.7.7";
+static char s2io_driver_version[] = DRV_VERSION;
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
* macro below identifies these cards given the subsystem_id.
*/
-#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \
- (((subid >= 0x600B) && (subid <= 0x600D)) || \
- ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0
+#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
+ (dev_type == XFRAME_I_DEVICE) ? \
+ ((((subid >= 0x600B) && (subid <= 0x600D)) || \
+ ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
#define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
+#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
+ init_timer(&timer); \
+ timer.function = handle; \
+ timer.data = (unsigned long) arg; \
+ mod_timer(&timer, (jiffies + exp)) \
+
+/* Add the vlan */
+static void s2io_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ nic_t *nic = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->tx_lock, flags);
+ nic->vlgrp = grp;
+ spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
+/* Unregister the vlan */
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+{
+ nic_t *nic = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->tx_lock, flags);
+ if (nic->vlgrp)
+ nic->vlgrp->vlan_devices[vid] = NULL;
+ spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
/*
* Constants to be programmed into the Xena's registers, to configure
* the XAUI.
#define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL
#define END_SIGN 0x0
-static u64 default_mdio_cfg[] = {
+static u64 herc_act_dtx_cfg[] = {
+ /* Set address */
+ 0x8000051536750000ULL, 0x80000515367500E0ULL,
+ /* Write data */
+ 0x8000051536750004ULL, 0x80000515367500E4ULL,
+ /* Set address */
+ 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
+ /* Write data */
+ 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
+ /* Set address */
+ 0x801205150D440000ULL, 0x801205150D4400E0ULL,
+ /* Write data */
+ 0x801205150D440004ULL, 0x801205150D4400E4ULL,
+ /* Set address */
+ 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
+ /* Write data */
+ 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
+ /* Done */
+ END_SIGN
+};
+
+static u64 xena_mdio_cfg[] = {
/* Reset PMA PLL */
0xC001010000000000ULL, 0xC0010100000000E0ULL,
0xC0010100008000E4ULL,
END_SIGN
};
-static u64 default_dtx_cfg[] = {
+static u64 xena_dtx_cfg[] = {
0x8000051500000000ULL, 0x80000515000000E0ULL,
0x80000515D93500E4ULL, 0x8001051500000000ULL,
0x80010515000000E0ULL, 0x80010515001E00E4ULL,
static unsigned int shared_splits;
static unsigned int tmac_util_period = 5;
static unsigned int rmac_util_period = 5;
+static unsigned int bimodal = 0;
#ifndef CONFIG_S2IO_NAPI
static unsigned int indicate_max_pkts;
#endif
+/* Frequency of Rx desc syncs expressed as power of 2 */
+static unsigned int rxsync_frequency = 3;
+/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
+static unsigned int intr_type = 0;
/*
* S2IO device table.
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
#ifdef CONFIG_2BUFF_MODE
- u64 tmp;
+ unsigned long tmp;
buffAdd_t *ba;
#endif
size += config->tx_cfg[i].fifo_len;
}
if (size > MAX_AVAILABLE_TXDS) {
- DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ",
- dev->name);
- DBG_PRINT(ERR_DBG, "exceeds the maximum value ");
- DBG_PRINT(ERR_DBG, "that can be used\n");
+ DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ",
+ __FUNCTION__);
+ DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
return FAILURE;
}
config->tx_cfg[i].fifo_len - 1;
mac_control->fifos[i].fifo_no = i;
mac_control->fifos[i].nic = nic;
- mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
+ mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1;
for (j = 0; j < page_num; j++) {
int k = 0;
DBG_PRINT(ERR_DBG, "failed for TxDL\n");
return -ENOMEM;
}
+ /* If we got a zero DMA address(can happen on
+ * certain platforms like PPC), reallocate.
+ * Store virtual address of page we don't want,
+ * to be freed later.
+ */
+ if (!tmp_p) {
+ mac_control->zerodma_virt_addr = tmp_v;
+ DBG_PRINT(INIT_DBG,
+ "%s: Zero DMA address for TxDL. ", dev->name);
+ DBG_PRINT(INIT_DBG,
+ "Virtual address %p\n", tmp_v);
+ tmp_v = pci_alloc_consistent(nic->pdev,
+ PAGE_SIZE, &tmp_p);
+ if (!tmp_v) {
+ DBG_PRINT(ERR_DBG,
+ "pci_alloc_consistent ");
+ DBG_PRINT(ERR_DBG, "failed for TxDL\n");
+ return -ENOMEM;
+ }
+ }
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
if (l == config->tx_cfg[i].fifo_len)
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
- tmp = (u64) ba->ba_0_org;
+ tmp = (unsigned long) ba->ba_0_org;
tmp += ALIGN_SIZE;
- tmp &= ~((u64) ALIGN_SIZE);
+ tmp &= ~((unsigned long) ALIGN_SIZE);
ba->ba_0 = (void *) tmp;
ba->ba_1_org = (void *) kmalloc
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
- tmp = (u64) ba->ba_1_org;
+ tmp = (unsigned long) ba->ba_1_org;
tmp += ALIGN_SIZE;
- tmp &= ~((u64) ALIGN_SIZE);
+ tmp &= ~((unsigned long) ALIGN_SIZE);
ba->ba_1 = (void *) tmp;
k++;
}
mac_info_t *mac_control;
struct config_param *config;
int lst_size, lst_per_page;
-
+ struct net_device *dev = nic->dev;
if (!nic)
return;
lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
+ if (!mac_control->fifos[i].list_info)
+ return;
if (!mac_control->fifos[i].list_info[mem_blks].
- list_virt_addr)
+ list_virt_addr)
break;
pci_free_consistent(nic->pdev, PAGE_SIZE,
mac_control->fifos[i].
list_info[mem_blks].
list_phy_addr);
}
+ /* If we got a zero DMA address during allocation,
+ * free the page now
+ */
+ if (mac_control->zerodma_virt_addr) {
+ pci_free_consistent(nic->pdev, PAGE_SIZE,
+ mac_control->zerodma_virt_addr,
+ (dma_addr_t)0);
+ DBG_PRINT(INIT_DBG,
+ "%s: Freeing TxDL with zero DMA addr. ",
+ dev->name);
+ DBG_PRINT(INIT_DBG, "Virtual address %p\n",
+ mac_control->zerodma_virt_addr);
+ }
kfree(mac_control->fifos[i].list_info);
}
}
}
+/**
+ * s2io_verify_pci_mode -
+ */
+
+static int s2io_verify_pci_mode(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ register u64 val64 = 0;
+ int mode;
+
+ val64 = readq(&bar0->pci_mode);
+ mode = (u8)GET_PCI_MODE(val64);
+
+ if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ return -1; /* Unknown PCI mode */
+ return mode;
+}
+
+
+/**
+ * s2io_print_pci_mode -
+ */
+static int s2io_print_pci_mode(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ register u64 val64 = 0;
+ int mode;
+ struct config_param *config = &nic->config;
+
+ val64 = readq(&bar0->pci_mode);
+ mode = (u8)GET_PCI_MODE(val64);
+
+ if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ return -1; /* Unknown PCI mode */
+
+ if (val64 & PCI_MODE_32_BITS) {
+ DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
+ } else {
+ DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
+ }
+
+ switch(mode) {
+ case PCI_MODE_PCI_33:
+ DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
+ config->bus_speed = 33;
+ break;
+ case PCI_MODE_PCI_66:
+ DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
+ config->bus_speed = 133;
+ break;
+ case PCI_MODE_PCIX_M1_66:
+ DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
+ config->bus_speed = 133; /* Herc doubles the clock rate */
+ break;
+ case PCI_MODE_PCIX_M1_100:
+ DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
+ config->bus_speed = 200;
+ break;
+ case PCI_MODE_PCIX_M1_133:
+ DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
+ config->bus_speed = 266;
+ break;
+ case PCI_MODE_PCIX_M2_66:
+ DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
+ config->bus_speed = 133;
+ break;
+ case PCI_MODE_PCIX_M2_100:
+ DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
+ config->bus_speed = 200;
+ break;
+ case PCI_MODE_PCIX_M2_133:
+ DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
+ config->bus_speed = 266;
+ break;
+ default:
+ return -1; /* Unsupported bus speed */
+ }
+
+ return mode;
+}
+
/**
* init_nic - Initialization of hardware
* @nic: device peivate variable
return -1;
}
+ /*
+ * Herc requires EOI to be removed from reset before XGXS, so..
+ */
+ if (nic->device_type & XFRAME_II_DEVICE) {
+ val64 = 0xA500000000ULL;
+ writeq(val64, &bar0->sw_reset);
+ msleep(500);
+ val64 = readq(&bar0->sw_reset);
+ }
+
/* Remove XGXS from reset state */
val64 = 0;
writeq(val64, &bar0->sw_reset);
* of 64 bit values into two registers in a particular
* sequence. Hence a macro 'SWITCH_SIGN' has been defined
* which will be defined in the array of configuration values
- * (default_dtx_cfg & default_mdio_cfg) at appropriate places
+ * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places
* to switch writing from one regsiter to another. We continue
* writing these values until we encounter the 'END_SIGN' macro.
* For example, After making a series of 21 writes into
* dtx_control register the 'SWITCH_SIGN' appears and hence we
* start writing into mdio_control until we encounter END_SIGN.
*/
- while (1) {
- dtx_cfg:
- while (default_dtx_cfg[dtx_cnt] != END_SIGN) {
- if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
- dtx_cnt++;
- goto mdio_cfg;
- }
- SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt],
+ if (nic->device_type & XFRAME_II_DEVICE) {
+ while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
+ SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
&bar0->dtx_control, UF);
- val64 = readq(&bar0->dtx_control);
+ if (dtx_cnt & 0x1)
+ msleep(1); /* Necessary!! */
dtx_cnt++;
}
- mdio_cfg:
- while (default_mdio_cfg[mdio_cnt] != END_SIGN) {
- if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+ } else {
+ while (1) {
+ dtx_cfg:
+ while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
+ if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
+ dtx_cnt++;
+ goto mdio_cfg;
+ }
+ SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
+ &bar0->dtx_control, UF);
+ val64 = readq(&bar0->dtx_control);
+ dtx_cnt++;
+ }
+ mdio_cfg:
+ while (xena_mdio_cfg[mdio_cnt] != END_SIGN) {
+ if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+ mdio_cnt++;
+ goto dtx_cfg;
+ }
+ SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt],
+ &bar0->mdio_control, UF);
+ val64 = readq(&bar0->mdio_control);
mdio_cnt++;
+ }
+ if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) &&
+ (xena_mdio_cfg[mdio_cnt] == END_SIGN)) {
+ break;
+ } else {
goto dtx_cfg;
}
- SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt],
- &bar0->mdio_control, UF);
- val64 = readq(&bar0->mdio_control);
- mdio_cnt++;
- }
- if ((default_dtx_cfg[dtx_cnt] == END_SIGN) &&
- (default_mdio_cfg[mdio_cnt] == END_SIGN)) {
- break;
- } else {
- goto dtx_cfg;
}
}
* Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
*/
- if (get_xena_rev_id(nic->pdev) < 4)
+ if ((nic->device_type == XFRAME_I_DEVICE) &&
+ (get_xena_rev_id(nic->pdev) < 4))
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
val64 = readq(&bar0->tx_fifo_partition_0);
* configured Rings.
*/
val64 = 0;
- mem_size = 64;
+ if (nic->device_type & XFRAME_II_DEVICE)
+ mem_size = 32;
+ else
+ mem_size = 64;
+
for (i = 0; i < config->rx_ring_num; i++) {
switch (i) {
case 0:
/* Program statistics memory */
writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = STAT_BC(0x320);
+ writeq(val64, &bar0->stat_byte_cnt);
+ }
+
/*
* Initializing the sampling rate for the device to calculate the
* bandwidth utilization.
* 250 interrupts per sec. Continuous interrupts are enabled
* by default.
*/
- val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) |
- TTI_DATA1_MEM_TX_URNG_A(0xA) |
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ int count = (nic->config.bus_speed * 125)/2;
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
+ } else {
+
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
+ }
+ val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
TTI_DATA1_MEM_TX_URNG_B(0x10) |
TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
- if (use_continuous_tx_intrs)
- val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ if (use_continuous_tx_intrs)
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
writeq(val64, &bar0->tti_data1_mem);
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
time++;
}
- /* RTI Initialization */
- val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) |
- RTI_DATA1_MEM_RX_URNG_A(0xA) |
- RTI_DATA1_MEM_RX_URNG_B(0x10) |
- RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+ if (nic->config.bimodal) {
+ int k = 0;
+ for (k = 0; k < config->rx_ring_num; k++) {
+ val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
+ val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
+ writeq(val64, &bar0->tti_command_mem);
- writeq(val64, &bar0->rti_data1_mem);
+ /*
+ * Once the operation completes, the Strobe bit of the command
+ * register will be reset. We poll for this particular condition
+ * We wait for a maximum of 500ms for the operation to complete,
+ * if it's not complete by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->tti_command_mem);
+ if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG,
+ "%s: TTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
+ }
+ } else {
- val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
- RTI_DATA2_MEM_RX_UFC_B(0x2) |
- RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
- writeq(val64, &bar0->rti_data2_mem);
+ /* RTI Initialization */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ /*
+ * Programmed to generate Apprx 500 Intrs per
+ * second
+ */
+ int count = (nic->config.bus_speed * 125)/4;
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
+ } else {
+ val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
+ }
+ val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
+ RTI_DATA1_MEM_RX_URNG_B(0x10) |
+ RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+
+ writeq(val64, &bar0->rti_data1_mem);
+
+ val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
+ RTI_DATA2_MEM_RX_UFC_B(0x2) ;
+ if (nic->intr_type == MSI_X)
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x40));
+ else
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x80));
+ writeq(val64, &bar0->rti_data2_mem);
- val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
- writeq(val64, &bar0->rti_command_mem);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
+ | RTI_CMD_MEM_OFFSET(i);
+ writeq(val64, &bar0->rti_command_mem);
- /*
- * Once the operation completes, the Strobe bit of the
- * command register will be reset. We poll for this
- * particular condition. We wait for a maximum of 500ms
- * for the operation to complete, if it's not complete
- * by then we return error.
- */
- time = 0;
- while (TRUE) {
- val64 = readq(&bar0->rti_command_mem);
- if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
- break;
- }
- if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
- dev->name);
- return -1;
+ /*
+ * Once the operation completes, the Strobe bit of the
+ * command register will be reset. We poll for this
+ * particular condition. We wait for a maximum of 500ms
+ * for the operation to complete, if it's not complete
+ * by then we return error.
+ */
+ time = 0;
+ while (TRUE) {
+ val64 = readq(&bar0->rti_command_mem);
+ if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
+ break;
+ }
+ if (time > 10) {
+ DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+ dev->name);
+ return -1;
+ }
+ time++;
+ msleep(50);
+ }
}
- time++;
- msleep(50);
}
/*
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
/* Disable RMAC PAD STRIPPING */
- add = (void *) &bar0->mac_cfg;
+ add = &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
writeq(val64, &bar0->pic_control);
+ /*
+ * Programming the Herc to split every write transaction
+ * that does not start on an ADB to reduce disconnects.
+ */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = WREQ_SPLIT_MASK_SET_MASK(255);
+ writeq(val64, &bar0->wreq_split_mask);
+ }
+
+ /* Setting Link stability period to 64 ms */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ val64 = MISC_LINK_STABILITY_PRD(3);
+ writeq(val64, &bar0->misc_control);
+ }
+
return SUCCESS;
}
+#define LINK_UP_DOWN_INTERRUPT 1
+#define MAC_RMAC_ERR_TIMER 2
+
+int s2io_link_fault_indication(nic_t *nic)
+{
+ if (nic->intr_type != INTA)
+ return MAC_RMAC_ERR_TIMER;
+ if (nic->device_type == XFRAME_II_DEVICE)
+ return LINK_UP_DOWN_INTERRUPT;
+ else
+ return MAC_RMAC_ERR_TIMER;
+}
/**
* en_dis_able_nic_intrs - Enable or Disable the interrupts
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
/*
- * Disabled all PCIX, Flash, MDIO, IIC and GPIO
+ * If Hercules adapter enable GPIO otherwise
+ * disabled all PCIX, Flash, MDIO, IIC and GPIO
* interrupts for now.
* TODO
*/
- writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
+ if (s2io_link_fault_indication(nic) ==
+ LINK_UP_DOWN_INTERRUPT ) {
+ temp64 = readq(&bar0->pic_int_mask);
+ temp64 &= ~((u64) PIC_INT_GPIO);
+ writeq(temp64, &bar0->pic_int_mask);
+ temp64 = readq(&bar0->gpio_int_mask);
+ temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
+ writeq(temp64, &bar0->gpio_int_mask);
+ } else {
+ writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
+ }
/*
* No MSI Support is available presently, so TTI and
* RTI interrupts are also disabled.
writeq(temp64, &bar0->general_int_mask);
/*
* All MAC block error interrupts are disabled for now
- * except the link status change interrupt.
* TODO
*/
- val64 = MAC_INT_STATUS_RMAC_INT;
- temp64 = readq(&bar0->mac_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->mac_int_mask);
-
- val64 = readq(&bar0->mac_rmac_err_mask);
- val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
- writeq(val64, &bar0->mac_rmac_err_mask);
} else if (flag == DISABLE_INTRS) {
/*
* Disable MAC Intrs in the general intr mask register
}
}
-static int check_prc_pcc_state(u64 val64, int flag, int rev_id)
+static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc)
{
int ret = 0;
if (flag == FALSE) {
- if (rev_id >= 4) {
+ if ((!herc && (rev_id >= 4)) || herc) {
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
ret = 1;
}
- } else {
+ }else {
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
}
}
} else {
- if (rev_id >= 4) {
+ if ((!herc && (rev_id >= 4)) || herc) {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
ADAPTER_STATUS_RMAC_PCC_IDLE) &&
(!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
{
- int ret = 0;
+ int ret = 0, herc;
u64 tmp64 = ~((u64) val64);
int rev_id = get_xena_rev_id(sp->pdev);
+ herc = (sp->device_type == XFRAME_II_DEVICE);
if (!
(tmp64 &
(ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
ADAPTER_STATUS_P_PLL_LOCK))) {
- ret = check_prc_pcc_state(val64, flag, rev_id);
+ ret = check_prc_pcc_state(val64, flag, rev_id, herc);
}
return ret;
&bar0->prc_rxd0_n[i]);
val64 = readq(&bar0->prc_ctrl_n[i]);
+ if (nic->config.bimodal)
+ val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
#ifndef CONFIG_2BUFF_MODE
val64 |= PRC_CTRL_RC_ENABLED;
#else
}
/* Enable select interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
- RX_MAC_INTR | MC_INTR;
- en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ if (nic->intr_type != INTA)
+ en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
+ else {
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+ en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ }
/*
* With some switches, link might be already up at this point.
/* SXE-002: Initialize link and activity LED */
subid = nic->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if (((subid & 0xFF) >= 0x07) &&
+ (nic->device_type == XFRAME_I_DEVICE)) {
val64 = readq(&bar0->gpio_control);
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+ writeq(val64, (void __iomem *)bar0 + 0x2700);
}
/*
config = &nic->config;
/* Disable all interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
- RX_MAC_INTR | MC_INTR;
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
/* Disable PRCs */
#ifndef CONFIG_S2IO_NAPI
unsigned long flags;
#endif
+ RxD_t *first_rxdp = NULL;
mac_control = &nic->mac_control;
config = &nic->config;
if (!skb) {
DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
return -ENOMEM;
}
#ifndef CONFIG_2BUFF_MODE
rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
rxdp->Host_Control = (unsigned long) (skb);
- rxdp->Control_1 |= RXD_OWN_XENA;
+ if (alloc_tab & ((1 << rxsync_frequency) - 1))
+ rxdp->Control_1 |= RXD_OWN_XENA;
off++;
off %= (MAX_RXDS_PER_BLOCK + 1);
mac_control->rings[ring_no].rx_curr_put_info.offset = off;
rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */
rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */
rxdp->Host_Control = (u64) ((unsigned long) (skb));
- rxdp->Control_1 |= RXD_OWN_XENA;
+ if (alloc_tab & ((1 << rxsync_frequency) - 1))
+ rxdp->Control_1 |= RXD_OWN_XENA;
off++;
mac_control->rings[ring_no].rx_curr_put_info.offset = off;
#endif
rxdp->Control_2 |= SET_RXD_MARKER;
+ if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
+ first_rxdp = rxdp;
+ }
atomic_inc(&nic->rx_bufs_left[ring_no]);
alloc_tab++;
}
end:
+ /* Transfer ownership of first descriptor to adapter just before
+ * exiting. Before that, use memory barrier so that ownership
+ * and other fields are seen by adapter correctly.
+ */
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |= RXD_OWN_XENA;
+ }
+
return SUCCESS;
}
int pkt_cnt = 0, org_pkts_to_process;
mac_info_t *mac_control;
struct config_param *config;
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
u64 val64;
int i;
#endif
spin_lock(&nic->rx_lock);
if (atomic_read(&nic->card_state) == CARD_DOWN) {
- DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n",
+ DBG_PRINT(INTR_DBG, "%s: %s going down for reset\n",
__FUNCTION__, dev->name);
spin_unlock(&nic->rx_lock);
+ return;
}
get_info = ring_data->rx_curr_get_info;
if (txdlp->Control_1 & TXD_T_CODE) {
unsigned long long err;
err = txdlp->Control_1 & TXD_T_CODE;
- DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
- err);
+ if ((err >> 48) == 0xA) {
+ DBG_PRINT(TX_DBG, "TxD returned due \
+to loss of link\n");
+ }
+ else {
+ DBG_PRINT(ERR_DBG, "***TxD error \
+%llx\n", err);
+ }
}
skb = (struct sk_buff *) ((unsigned long)
for (j = 0; j < frg_cnt; j++, txdlp++) {
skb_frag_t *frag =
&skb_shinfo(skb)->frags[j];
+ if (!txdlp->Buffer_Pointer)
+ break;
pci_unmap_page(nic->pdev,
(dma_addr_t)
txdlp->
register u64 val64 = 0, err_reg = 0;
/* Handling link status change error Intr */
- err_reg = readq(&bar0->mac_rmac_err_reg);
- writeq(err_reg, &bar0->mac_rmac_err_reg);
- if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
- schedule_work(&nic->set_link_task);
+ if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+ err_reg = readq(&bar0->mac_rmac_err_reg);
+ writeq(err_reg, &bar0->mac_rmac_err_reg);
+ if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
+ schedule_work(&nic->set_link_task);
+ }
}
/* Handling Ecc errors */
if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
nic->mac_control.stats_info->sw_stat.
double_ecc_errs++;
- DBG_PRINT(ERR_DBG, "%s: Device indicates ",
+ DBG_PRINT(INIT_DBG, "%s: Device indicates ",
dev->name);
- DBG_PRINT(ERR_DBG, "double ECC error!!\n");
- netif_stop_queue(dev);
- schedule_work(&nic->rst_timer_task);
+ DBG_PRINT(INIT_DBG, "double ECC error!!\n");
+ if (nic->device_type != XFRAME_II_DEVICE) {
+ /* Reset XframeI only if critical error */
+ if (val64 & (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
+ MC_ERR_REG_MIRI_ECC_DB_ERR_1)) {
+ netif_stop_queue(dev);
+ schedule_work(&nic->rst_timer_task);
+ }
+ }
} else {
nic->mac_control.stats_info->sw_stat.
single_ecc_errs++;
val64 = readq(&bar0->serr_source);
if (val64 & SERR_SOURCE_ANY) {
DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name);
- DBG_PRINT(ERR_DBG, "serious error!!\n");
+ DBG_PRINT(ERR_DBG, "serious error %llx!!\n",
+ (unsigned long long)val64);
netif_stop_queue(dev);
schedule_work(&nic->rst_timer_task);
}
u64 val64;
u16 subid, pci_cmd;
+ /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
+ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
+
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
*/
msleep(250);
- /* Restore the PCI state saved during initializarion. */
+ /* Restore the PCI state saved during initialization. */
pci_restore_state(sp->pdev);
-
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ pci_cmd);
s2io_init_pci(sp);
msleep(250);
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
+ /* Restore the MSIX table entries from local variables */
+ restore_xmsi_data(sp);
+
/* Clear certain PCI/PCI-X fields after reset */
- pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
- pci_cmd &= 0x7FFF; /* Clear parity err detect bit */
- pci_write_config_word(sp->pdev, PCI_COMMAND, pci_cmd);
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ /* Clear parity err detect bit */
+ pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
- val64 = readq(&bar0->txpic_int_reg);
- val64 &= ~BIT(62); /* Clearing PCI_STATUS error reflected here */
- writeq(val64, &bar0->txpic_int_reg);
+ /* Clearing PCIX Ecc status register */
+ pci_write_config_dword(sp->pdev, 0x68, 0x7C);
- /* Clearing PCIX Ecc status register */
- pci_write_config_dword(sp->pdev, 0x68, 0);
+ /* Clearing PCI_STATUS error reflected here */
+ writeq(BIT(62), &bar0->txpic_int_reg);
+ }
/* Reset device statistics maintained by OS */
memset(&sp->stats, 0, sizeof (struct net_device_stats));
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if (((subid & 0xFF) >= 0x07) &&
+ (sp->device_type == XFRAME_I_DEVICE)) {
val64 = readq(&bar0->gpio_control);
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+ writeq(val64, (void __iomem *)bar0 + 0x2700);
+ }
+
+ /*
+ * Clear spurious ECC interrupts that would have occured on
+ * XFRAME II cards after reset.
+ */
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ val64 = readq(&bar0->pcc_err_reg);
+ writeq(val64, &bar0->pcc_err_reg);
}
sp->device_enabled_once = FALSE;
SWAPPER_CTRL_RXD_W_FE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (sp->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#else
/*
SWAPPER_CTRL_RXD_W_SE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (sp->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#endif
val64 = readq(&bar0->swapper_ctrl);
return SUCCESS;
}
+int wait_for_msix_trans(nic_t *nic, int i)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int ret = 0, cnt = 0;
+
+ do {
+ val64 = readq(&bar0->xmsi_access);
+ if (!(val64 & BIT(15)))
+ break;
+ mdelay(1);
+ cnt++;
+ } while(cnt < 5);
+ if (cnt == 5) {
+ DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+void restore_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int i;
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
+ writeq(nic->msix_info[i].data, &bar0->xmsi_data);
+ val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ }
+}
+
+void store_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64, addr, data;
+ int i;
+
+ /* Store and display */
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ val64 = (BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ addr = readq(&bar0->xmsi_address);
+ data = readq(&bar0->xmsi_data);
+ if (addr && data) {
+ nic->msix_info[i].addr = addr;
+ nic->msix_info[i].data = data;
+ }
+ }
+}
+
+int s2io_enable_msi(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u16 msi_ctrl, msg_val;
+ struct config_param *config = &nic->config;
+ struct net_device *dev = nic->dev;
+ u64 val64, tx_mat, rx_mat;
+ int i, err;
+
+ val64 = readq(&bar0->pic_control);
+ val64 &= ~BIT(1);
+ writeq(val64, &bar0->pic_control);
+
+ err = pci_enable_msi(nic->pdev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n",
+ nic->dev->name);
+ return err;
+ }
+
+ /*
+ * Enable MSI and use MSI-1 in stead of the standard MSI-0
+ * for interrupt handling.
+ */
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+ msg_val ^= 0x1;
+ pci_write_config_word(nic->pdev, 0x4c, msg_val);
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+
+ pci_read_config_word(nic->pdev, 0x42, &msi_ctrl);
+ msi_ctrl |= 0x10;
+ pci_write_config_word(nic->pdev, 0x42, msi_ctrl);
+
+ /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<config->tx_fifo_num; i++) {
+ tx_mat |= TX_MAT_SET(i, 1);
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ rx_mat = readq(&bar0->rx_mat);
+ for (i=0; i<config->rx_ring_num; i++) {
+ rx_mat |= RX_MAT_SET(i, 1);
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+
+ dev->irq = nic->pdev->irq;
+ return 0;
+}
+
+int s2io_enable_msi_x(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 tx_mat, rx_mat;
+ u16 msi_control; /* Temp variable */
+ int ret, i, j, msix_indx = 1;
+
+ nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (nic->entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+
+ nic->s2io_entries =
+ kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
+ GFP_KERNEL);
+ if (nic->s2io_entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ kfree(nic->entries);
+ return -ENOMEM;
+ }
+ memset(nic->s2io_entries, 0,
+ MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ nic->entries[i].entry = i;
+ nic->s2io_entries[i].entry = i;
+ nic->s2io_entries[i].arg = NULL;
+ nic->s2io_entries[i].in_use = 0;
+ }
+
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
+ nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ if (!nic->config.bimodal) {
+ rx_mat = readq(&bar0->rx_mat);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ rx_mat |= RX_MAT_SET(j, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+ } else {
+ tx_mat = readq(&bar0->tx_mat0_n[7]);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[7]);
+ }
+
+ ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
+ kfree(nic->entries);
+ kfree(nic->s2io_entries);
+ nic->entries = NULL;
+ nic->s2io_entries = NULL;
+ return -ENOMEM;
+ }
+
+ /*
+ * To enable MSI-X, MSI also needs to be enabled, due to a bug
+ * in the herc NIC. (Temp change, needs to be removed later)
+ */
+ pci_read_config_word(nic->pdev, 0x42, &msi_control);
+ msi_control |= 0x1; /* Enable MSI */
+ pci_write_config_word(nic->pdev, 0x42, msi_control);
+
+ return 0;
+}
+
/* ********************************************************* *
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
{
nic_t *sp = dev->priv;
int err = 0;
+ int i;
+ u16 msi_control; /* Temp variable */
/*
* Make sure you have link off by default every time
* Nic is initialized
*/
netif_carrier_off(dev);
- sp->last_link_state = 0; /* Unkown link state */
+ sp->last_link_state = 0;
/* Initialize H/W and enable interrupts */
if (s2io_card_up(sp)) {
goto hw_init_failed;
}
+ /* Store the values of the MSIX table in the nic_t structure */
+ store_xmsi_data(sp);
+
/* After proper initialization of H/W, register ISR */
- err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
- sp->name, dev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
- dev->name);
- goto isr_registration_failed;
+ if (sp->intr_type == MSI) {
+ err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+ SA_SHIRQ, sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI registration \
+failed\n", dev->name);
+ goto isr_registration_failed;
+ }
+ }
+ if (sp->intr_type == MSI_X) {
+ for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+ if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+ sprintf(sp->desc1, "%s:MSI-X-%d-TX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0, sp->desc1,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1,
+ sp->msix_info[i].addr);
+ } else {
+ sprintf(sp->desc2, "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0, sp->desc2,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2,
+ sp->msix_info[i].addr);
+ }
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
+failed\n", dev->name, i);
+ DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+ goto isr_registration_failed;
+ }
+ sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+ }
+ }
+ if (sp->intr_type == INTA) {
+ err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
+ sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+ dev->name);
+ goto isr_registration_failed;
+ }
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
return 0;
setting_mac_address_failed:
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type != MSI_X)
+ free_irq(sp->pdev->irq, dev);
isr_registration_failed:
+ del_timer_sync(&sp->alarm_timer);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_disable_msix(sp->pdev);
+
+ /* Temp */
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+ }
+ }
+ else if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
s2io_reset(sp);
hw_init_failed:
+ if (sp->intr_type == MSI_X) {
+ if (sp->entries)
+ kfree(sp->entries);
+ if (sp->s2io_entries)
+ kfree(sp->s2io_entries);
+ }
return err;
}
int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
+ int i;
+ u16 msi_control;
+
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+ pci_disable_msix(sp->pdev);
+ }
+ }
+ else {
+ free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
+ }
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
}
#ifdef NETIF_F_TSO
int mss;
#endif
+ u16 vlan_tag = 0;
+ int vlan_priority = 0;
mac_info_t *mac_control;
struct config_param *config;
queue = 0;
+ /* Get Fifo number to Transmit based on vlan priority */
+ if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ vlan_tag = vlan_tx_tag_get(skb);
+ vlan_priority = vlan_tag >> 13;
+ queue = config->fifo_mapping[vlan_priority];
+ }
+
put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
/* Avoid "put" pointer going beyond "get" pointer */
if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
- DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
+ DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
netif_stop_queue(dev);
dev_kfree_skb(skb);
spin_unlock_irqrestore(&sp->tx_lock, flags);
return 0;
}
+
+ /* A buffer with no data will be dropped */
+ if (!skb->len) {
+ DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ dev_kfree_skb(skb);
+ spin_unlock_irqrestore(&sp->tx_lock, flags);
+ return 0;
+ }
+
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
if (mss) {
}
txdp->Control_2 |= config->tx_intr_type;
+
+ if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ txdp->Control_2 |= TXD_VLAN_ENABLE;
+ txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
+ }
+
txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
TXD_GATHER_CODE_FIRST);
txdp->Control_1 |= TXD_LIST_OWN_XENA;
/* For fragmented SKB. */
for (i = 0; i < frg_cnt; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ /* A '0' length fragment will be ignored */
+ if (!frag->size)
+ continue;
txdp++;
txdp->Buffer_Pointer = (u64) pci_map_page
(sp->pdev, frag->page, frag->page_offset,
val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
writeq(val64, &tx_fifo->TxDL_Pointer);
- wmb();
-
val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
TX_FIFO_LAST_LIST);
#endif
writeq(val64, &tx_fifo->List_Control);
+ mmiowb();
+
put_off++;
put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
return 0;
}
+static void
+s2io_alarm_handle(unsigned long data)
+{
+ nic_t *sp = (nic_t *)data;
+
+ alarm_intr_handler(sp);
+ mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
+}
+
+static irqreturn_t
+s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ nic_t *sp = dev->priv;
+ int i;
+ int ret;
+ mac_info_t *mac_control;
+ struct config_param *config;
+
+ atomic_inc(&sp->isr_cnt);
+ mac_control = &sp->mac_control;
+ config = &sp->config;
+ DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__);
+
+ /* If Intr is because of Rx Traffic */
+ for (i = 0; i < config->rx_ring_num; i++)
+ rx_intr_handler(&mac_control->rings[i]);
+
+ /* If Intr is because of Tx Traffic */
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&mac_control->fifos[i]);
+
+ /*
+ * If the Rx buffer count is below the panic threshold then
+ * reallocate the buffers from the interrupt handler itself,
+ * else schedule a tasklet to reallocate the buffers.
+ */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ }
+
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ ring_info_t *ring = (ring_info_t *)dev_id;
+ nic_t *sp = ring->nic;
+ int rxb_size, level, rng_n;
+
+ atomic_inc(&sp->isr_cnt);
+ rx_intr_handler(ring);
+
+ rng_n = ring->ring_no;
+ rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
+ level = rx_buffer_level(sp, rxb_size, rng_n);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ int ret;
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "Out of memory in %s",
+ __FUNCTION__);
+ clear_bit(0, (&sp->tasklet_status));
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ atomic_dec(&sp->isr_cnt);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ fifo_info_t *fifo = (fifo_info_t *)dev_id;
+ nic_t *sp = fifo->nic;
+
+ atomic_inc(&sp->isr_cnt);
+ tx_intr_handler(fifo);
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
+static void s2io_txpic_intr_handle(nic_t *sp)
+{
+ XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ u64 val64;
+
+ val64 = readq(&bar0->pic_int_status);
+ if (val64 & PIC_INT_GPIO) {
+ val64 = readq(&bar0->gpio_int_reg);
+ if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
+ (val64 & GPIO_INT_REG_LINK_UP)) {
+ val64 |= GPIO_INT_REG_LINK_DOWN;
+ val64 |= GPIO_INT_REG_LINK_UP;
+ writeq(val64, &bar0->gpio_int_reg);
+ goto masking;
+ }
+
+ if (((sp->last_link_state == LINK_UP) &&
+ (val64 & GPIO_INT_REG_LINK_DOWN)) ||
+ ((sp->last_link_state == LINK_DOWN) &&
+ (val64 & GPIO_INT_REG_LINK_UP))) {
+ val64 = readq(&bar0->gpio_int_mask);
+ val64 |= GPIO_INT_MASK_LINK_DOWN;
+ val64 |= GPIO_INT_MASK_LINK_UP;
+ writeq(val64, &bar0->gpio_int_mask);
+ s2io_set_link((unsigned long)sp);
+ }
+masking:
+ if (sp->last_link_state == LINK_UP) {
+ /*enable down interrupt */
+ val64 = readq(&bar0->gpio_int_mask);
+ /* unmasks link down intr */
+ val64 &= ~GPIO_INT_MASK_LINK_DOWN;
+ /* masks link up intr */
+ val64 |= GPIO_INT_MASK_LINK_UP;
+ writeq(val64, &bar0->gpio_int_mask);
+ } else {
+ /*enable UP Interrupt */
+ val64 = readq(&bar0->gpio_int_mask);
+ /* unmasks link up interrupt */
+ val64 &= ~GPIO_INT_MASK_LINK_UP;
+ /* masks link down interrupt */
+ val64 |= GPIO_INT_MASK_LINK_DOWN;
+ writeq(val64, &bar0->gpio_int_mask);
+ }
+ }
+}
+
/**
* s2io_isr - ISR handler of the device .
* @irq: the irq of the device.
return IRQ_NONE;
}
- if (reason & (GEN_ERROR_INTR))
- alarm_intr_handler(sp);
-
#ifdef CONFIG_S2IO_NAPI
if (reason & GEN_INTR_RXTRAFFIC) {
if (netif_rx_schedule_prep(dev)) {
tx_intr_handler(&mac_control->fifos[i]);
}
+ if (reason & GEN_INTR_TXPIC)
+ s2io_txpic_intr_handle(sp);
/*
* If the Rx buffer count is below the panic threshold then
* reallocate the buffers from the interrupt handler itself,
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 1;
- DBG_PRINT(ERR_DBG, "%s: entered promiscuous mode\n",
+ DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
dev->name);
} else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
/* Remove the NIC from promiscuous mode */
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 0;
- DBG_PRINT(ERR_DBG, "%s: left promiscuous mode\n",
+ DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
dev->name);
}
{
nic_t *sp = dev->priv;
- strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name));
- strncpy(info->version, s2io_driver_version,
- sizeof(s2io_driver_version));
- strncpy(info->fw_version, "", 32);
- strncpy(info->bus_info, pci_name(sp->pdev), 32);
+ strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
+ strncpy(info->version, s2io_driver_version, sizeof(info->version));
+ strncpy(info->fw_version, "", sizeof(info->fw_version));
+ strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
info->regdump_len = XENA_REG_SPACE;
info->eedump_len = XENA_EEPROM_SPACE;
info->testinfo_len = S2IO_TEST_LEN;
u16 subid;
subid = sp->pdev->subsystem_device;
- if ((subid & 0xFF) >= 0x07) {
+ if ((sp->device_type == XFRAME_II_DEVICE) ||
+ ((subid & 0xFF) >= 0x07)) {
val64 = readq(&bar0->gpio_control);
val64 ^= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
subid = sp->pdev->subsystem_device;
last_gpio_ctrl_val = readq(&bar0->gpio_control);
- if ((subid & 0xFF) < 0x07) {
+ if ((sp->device_type == XFRAME_I_DEVICE) &&
+ ((subid & 0xFF) < 0x07)) {
val64 = readq(&bar0->adapter_control);
if (!(val64 & ADAPTER_CNTL_EN)) {
printk(KERN_ERR
msleep_interruptible(MAX_FLICKER_TIME);
del_timer_sync(&sp->id_timer);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
writeq(last_gpio_ctrl_val, &bar0->gpio_control);
last_gpio_ctrl_val = readq(&bar0->gpio_control);
}
*/
#define S2IO_DEV_ID 5
-static int read_eeprom(nic_t * sp, int off, u32 * data)
+static int read_eeprom(nic_t * sp, int off, u64 * data)
{
int ret = -1;
u32 exit_cnt = 0;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- *data = I2C_CONTROL_GET_DATA(val64);
- ret = 0;
- break;
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ *data = I2C_CONTROL_GET_DATA(val64);
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(0x3) |
+ SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
+ *data = readq(&bar0->spi_data);
+ *data &= 0xffffff;
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
return ret;
}
* 0 on success, -1 on failure.
*/
-static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
+static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
{
int exit_cnt = 0, ret = -1;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ if (!(val64 & I2C_CONTROL_NACK))
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- if (!(val64 & I2C_CONTROL_NACK))
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ int write_cnt = (cnt == 8) ? 0 : cnt;
+ writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
+
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(write_cnt) |
+ SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
ret = 0;
- break;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
-
return ret;
}
static int s2io_ethtool_geeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * data_buf)
{
- u32 data, i, valid;
+ u32 i, valid;
+ u64 data;
nic_t *sp = dev->priv;
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
u8 * data_buf)
{
int len = eeprom->len, cnt = 0;
- u32 valid = 0, data;
+ u64 valid = 0, data;
nic_t *sp = dev->priv;
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
static int s2io_register_test(nic_t * sp, uint64_t * data)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- u64 val64 = 0;
+ u64 val64 = 0, exp_val;
int fail = 0;
val64 = readq(&bar0->pif_rd_swapper_fb);
}
val64 = readq(&bar0->rx_queue_cfg);
- if (val64 != 0x0808080808080808ULL) {
+ if (sp->device_type == XFRAME_II_DEVICE)
+ exp_val = 0x0404040404040404ULL;
+ else
+ exp_val = 0x0808080808080808ULL;
+ if (val64 != exp_val) {
fail = 1;
DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
}
}
*data = fail;
- return 0;
+ return fail;
}
/**
static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
{
int fail = 0;
- u32 ret_data;
+ u64 ret_data, org_4F0, org_7F0;
+ u8 saved_4F0 = 0, saved_7F0 = 0;
+ struct net_device *dev = sp->dev;
/* Test Write Error at offset 0 */
- if (!write_eeprom(sp, 0, 0, 3))
- fail = 1;
+ /* Note that SPI interface allows write access to all areas
+ * of EEPROM. Hence doing all negative testing only for Xframe I.
+ */
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0, 0, 3))
+ fail = 1;
+
+ /* Save current values at offsets 0x4F0 and 0x7F0 */
+ if (!read_eeprom(sp, 0x4F0, &org_4F0))
+ saved_4F0 = 1;
+ if (!read_eeprom(sp, 0x7F0, &org_7F0))
+ saved_7F0 = 1;
/* Test Write at offset 4f0 */
- if (write_eeprom(sp, 0x4F0, 0x01234567, 3))
+ if (write_eeprom(sp, 0x4F0, 0x012345, 3))
fail = 1;
if (read_eeprom(sp, 0x4F0, &ret_data))
fail = 1;
- if (ret_data != 0x01234567)
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
/* Test Write Request Error at offset 0x7c */
- if (!write_eeprom(sp, 0x07C, 0, 3))
- fail = 1;
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0x07C, 0, 3))
+ fail = 1;
- /* Test Write Request at offset 0x7fc */
- if (write_eeprom(sp, 0x7FC, 0x01234567, 3))
+ /* Test Write Request at offset 0x7f0 */
+ if (write_eeprom(sp, 0x7F0, 0x012345, 3))
fail = 1;
- if (read_eeprom(sp, 0x7FC, &ret_data))
+ if (read_eeprom(sp, 0x7F0, &ret_data))
fail = 1;
- if (ret_data != 0x01234567)
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
- /* Test Write Error at offset 0x80 */
- if (!write_eeprom(sp, 0x080, 0, 3))
- fail = 1;
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ /* Test Write Error at offset 0x80 */
+ if (!write_eeprom(sp, 0x080, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0xfc */
- if (!write_eeprom(sp, 0x0FC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0xfc */
+ if (!write_eeprom(sp, 0x0FC, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0x100 */
- if (!write_eeprom(sp, 0x100, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0x100 */
+ if (!write_eeprom(sp, 0x100, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 4ec */
- if (!write_eeprom(sp, 0x4EC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 4ec */
+ if (!write_eeprom(sp, 0x4EC, 0, 3))
+ fail = 1;
+ }
+
+ /* Restore values at offsets 0x4F0 and 0x7F0 */
+ if (saved_4F0)
+ write_eeprom(sp, 0x4F0, org_4F0, 3);
+ if (saved_7F0)
+ write_eeprom(sp, 0x7F0, org_7F0, 3);
*data = fail;
- return 0;
+ return fail;
}
/**
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
- int cnt, iteration = 0, test_pass = 0;
+ int cnt, iteration = 0, test_fail = 0;
val64 = readq(&bar0->adapter_control);
val64 &= ~ADAPTER_ECC_EN;
val64 = readq(&bar0->mc_rldram_test_ctrl);
val64 |= MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
val64 = readq(&bar0->mc_rldram_mrs);
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
}
writeq(val64, &bar0->mc_rldram_test_d2);
- val64 = (u64) (0x0000003fffff0000ULL);
+ val64 = (u64) (0x0000003ffffe0100ULL);
writeq(val64, &bar0->mc_rldram_test_add);
-
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |=
- MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
- MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
+ MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
if (cnt == 5)
break;
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
break;
val64 = readq(&bar0->mc_rldram_test_ctrl);
- if (val64 & MC_RLDRAM_TEST_PASS)
- test_pass = 1;
+ if (!(val64 & MC_RLDRAM_TEST_PASS))
+ test_fail = 1;
iteration++;
}
- if (!test_pass)
- *data = 1;
- else
- *data = 0;
+ *data = test_fail;
- return 0;
+ /* Bring the adapter out of test mode */
+ SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
+
+ return test_fail;
}
/**
StatInfo_t *stat_info = sp->mac_control.stats_info;
s2io_updt_stats(sp);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_data_octets);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_mcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_bcst_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_any_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_vld_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_drop_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_icmp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_rst_tcp);
tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
- tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->tmac_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_data_octets);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_mcst_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_vld_bcst_frms);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_discarded_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_usized_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_osized_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_frag_frms);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_jabber_frms);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_ip);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_drop_ip);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_icmp);
tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip);
+ tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_err_drp_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_pause_cnt);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
+ le32_to_cpu(stat_info->rmac_accepted_ip);
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
tmp_stats[i++] = 0;
tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
- register u64 val64;
-
- if (netif_running(dev)) {
- DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name);
- DBG_PRINT(ERR_DBG, "change its MTU\n");
- return -EBUSY;
- }
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
return -EPERM;
}
- /* Set the new MTU into the PYLD register of the NIC */
- val64 = new_mtu;
- writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
-
dev->mtu = new_mtu;
+ if (netif_running(dev)) {
+ s2io_card_down(sp);
+ netif_stop_queue(dev);
+ if (s2io_card_up(sp)) {
+ DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
+ __FUNCTION__);
+ }
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ } else { /* Device is down */
+ XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ u64 val64 = new_mtu;
+
+ writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
+ }
return 0;
}
}
subid = nic->pdev->subsystem_device;
- /*
- * Allow a small delay for the NICs self initiated
- * cleanup to complete.
- */
- msleep(100);
+ if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+ /*
+ * Allow a small delay for the NICs self initiated
+ * cleanup to complete.
+ */
+ msleep(100);
+ }
val64 = readq(&bar0->adapter_status);
if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
val64 = readq(&bar0->adapter_control);
val64 |= ADAPTER_CNTL_EN;
writeq(val64, &bar0->adapter_control);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+ subid)) {
val64 = readq(&bar0->gpio_control);
val64 |= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
val64 |= ADAPTER_LED_ON;
writeq(val64, &bar0->adapter_control);
}
- val64 = readq(&bar0->adapter_status);
- if (!LINK_IS_UP(val64)) {
- DBG_PRINT(ERR_DBG, "%s:", dev->name);
- DBG_PRINT(ERR_DBG, " Link down");
- DBG_PRINT(ERR_DBG, "after ");
- DBG_PRINT(ERR_DBG, "enabling ");
- DBG_PRINT(ERR_DBG, "device \n");
+ if (s2io_link_fault_indication(nic) ==
+ MAC_RMAC_ERR_TIMER) {
+ val64 = readq(&bar0->adapter_status);
+ if (!LINK_IS_UP(val64)) {
+ DBG_PRINT(ERR_DBG, "%s:", dev->name);
+ DBG_PRINT(ERR_DBG, " Link down");
+ DBG_PRINT(ERR_DBG, "after ");
+ DBG_PRINT(ERR_DBG, "enabling ");
+ DBG_PRINT(ERR_DBG, "device \n");
+ }
}
if (nic->device_enabled_once == FALSE) {
nic->device_enabled_once = TRUE;
}
s2io_link(nic, LINK_UP);
} else {
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+ subid)) {
val64 = readq(&bar0->gpio_control);
val64 &= ~GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
unsigned long flags;
register u64 val64 = 0;
+ del_timer_sync(&sp->alarm_timer);
/* If s2io_set_link task is executing, wait till it completes. */
while (test_and_set_bit(0, &(sp->link_state))) {
msleep(50);
static int s2io_card_up(nic_t * sp)
{
- int i, ret;
+ int i, ret = 0;
mac_info_t *mac_control;
struct config_param *config;
struct net_device *dev = (struct net_device *) sp->dev;
return -ENODEV;
}
+ if (sp->intr_type == MSI)
+ ret = s2io_enable_msi(sp);
+ else if (sp->intr_type == MSI_X)
+ ret = s2io_enable_msi_x(sp);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+ sp->intr_type = INTA;
+ }
+
/*
* Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
return -ENODEV;
}
+ S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
+
atomic_set(&sp->card_state, CARD_UP);
return 0;
}
skb->protocol = eth_type_trans(skb, dev);
#ifdef CONFIG_S2IO_NAPI
- netif_receive_skb(skb);
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_receive_skb(skb);
+ }
#else
- netif_rx(skb);
+ if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ /* Queueing the vlan frame to the upper layer */
+ vlan_hwaccel_rx(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ } else {
+ netif_rx(skb);
+ }
#endif
dev->last_rx = jiffies;
atomic_dec(&sp->rx_bufs_left[ring_no]);
MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
module_param(tx_fifo_num, int, 0);
module_param(rx_ring_num, int, 0);
module_param_array(tx_fifo_len, uint, NULL, 0);
module_param(shared_splits, int, 0);
module_param(tmac_util_period, int, 0);
module_param(rmac_util_period, int, 0);
+module_param(bimodal, bool, 0);
#ifndef CONFIG_S2IO_NAPI
module_param(indicate_max_pkts, int, 0);
#endif
+module_param(rxsync_frequency, int, 0);
+module_param(intr_type, int, 0);
/**
* s2io_init_nic - Initialization of the adapter .
u16 subid;
mac_info_t *mac_control;
struct config_param *config;
+ int mode;
+ u8 dev_intr_type = intr_type;
#ifdef CONFIG_S2IO_NAPI
- DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+ if (dev_intr_type != INTA) {
+ DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \
+is enabled. Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ else
+ DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
#endif
if ((ret = pci_enable_device(pdev))) {
return -ENOMEM;
}
- if (pci_request_regions(pdev, s2io_driver_name)) {
- DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
- pci_disable_device(pdev);
- return -ENODEV;
+ if ((dev_intr_type == MSI_X) &&
+ ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
+ (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
+ DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \
+Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ if (dev_intr_type != MSI_X) {
+ if (pci_request_regions(pdev, s2io_driver_name)) {
+ DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ }
+ else {
+ if (!(request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n");
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ if (!(request_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n");
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
}
dev = alloc_etherdev(sizeof(nic_t));
sp->pdev = pdev;
sp->high_dma_flag = dma_flag;
sp->device_enabled_once = FALSE;
+ sp->intr_type = dev_intr_type;
+
+ if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
+ (pdev->device == PCI_DEVICE_ID_HERC_UNI))
+ sp->device_type = XFRAME_II_DEVICE;
+ else
+ sp->device_type = XFRAME_I_DEVICE;
+
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
config = &sp->config;
/* Tx side parameters. */
- tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
+ if (tx_fifo_len[0] == 0)
+ tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
config->tx_fifo_num = tx_fifo_num;
for (i = 0; i < MAX_TX_FIFOS; i++) {
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
break;
}
}
- config->max_txds = MAX_SKB_FRAGS;
+ config->max_txds = MAX_SKB_FRAGS + 1;
/* Rx side parameters. */
- rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
+ if (rx_ring_sz[0] == 0)
+ rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
config->rx_ring_num = rx_ring_num;
for (i = 0; i < MAX_RX_RINGS; i++) {
config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
/* initialize the shared memory used by the NIC and the host */
if (init_shared_mem(sp)) {
DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
- dev->name);
+ __FUNCTION__);
ret = -ENOMEM;
goto mem_alloc_failed;
}
dev->do_ioctl = &s2io_ioctl;
dev->change_mtu = &s2io_change_mtu;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_rx_register = s2io_vlan_rx_register;
+ dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
/*
* will use eth_mac_addr() for dev->set_mac_address
goto set_swap_failed;
}
- /*
- * Fix for all "FFs" MAC address problems observed on
- * Alpha platforms
- */
- fix_mac_address(sp);
- s2io_reset(sp);
+ /* Verify if the Herc works on the slot its placed into */
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ mode = s2io_verify_pci_mode(sp);
+ if (mode < 0) {
+ DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
+ DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
+ ret = -EBADSLT;
+ goto set_swap_failed;
+ }
+ }
+
+ /* Not needed for Herc */
+ if (sp->device_type & XFRAME_I_DEVICE) {
+ /*
+ * Fix for all "FFs" MAC address problems observed on
+ * Alpha platforms
+ */
+ fix_mac_address(sp);
+ s2io_reset(sp);
+ }
/*
* MAC address initialization.
sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
- DBG_PRINT(INIT_DBG,
- "DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n",
- sp->def_mac_addr[0].mac_addr[0],
- sp->def_mac_addr[0].mac_addr[1],
- sp->def_mac_addr[0].mac_addr[2],
- sp->def_mac_addr[0].mac_addr[3],
- sp->def_mac_addr[0].mac_addr[4],
- sp->def_mac_addr[0].mac_addr[5]);
-
/* Set the factory defined MAC address initially */
dev->addr_len = ETH_ALEN;
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
/*
* Initialize the tasklet status and link state flags
- * and the card statte parameter
+ * and the card state parameter
*/
atomic_set(&(sp->card_state), 0);
sp->tasklet_status = 0;
goto register_failed;
}
+ if (sp->device_type & XFRAME_II_DEVICE) {
+ DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
+ get_xena_rev_id(sp->pdev),
+ s2io_driver_version);
+#ifdef CONFIG_2BUFF_MODE
+ DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
+#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
+
+ DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
+ DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ sp->def_mac_addr[0].mac_addr[0],
+ sp->def_mac_addr[0].mac_addr[1],
+ sp->def_mac_addr[0].mac_addr[2],
+ sp->def_mac_addr[0].mac_addr[3],
+ sp->def_mac_addr[0].mac_addr[4],
+ sp->def_mac_addr[0].mac_addr[5]);
+ mode = s2io_print_pci_mode(sp);
+ if (mode < 0) {
+ DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode ");
+ ret = -EBADSLT;
+ goto set_swap_failed;
+ }
+ } else {
+ DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
+ get_xena_rev_id(sp->pdev),
+ s2io_driver_version);
+#ifdef CONFIG_2BUFF_MODE
+ DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
+#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
+ DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
+ DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ sp->def_mac_addr[0].mac_addr[0],
+ sp->def_mac_addr[0].mac_addr[1],
+ sp->def_mac_addr[0].mac_addr[2],
+ sp->def_mac_addr[0].mac_addr[3],
+ sp->def_mac_addr[0].mac_addr[4],
+ sp->def_mac_addr[0].mac_addr[5]);
+ }
+
/* Initialize device name */
strcpy(sp->name, dev->name);
- strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+ if (sp->device_type & XFRAME_II_DEVICE)
+ strcat(sp->name, ": Neterion Xframe II 10GbE adapter");
+ else
+ strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+
+ /* Initialize bimodal Interrupts */
+ sp->config.bimodal = bimodal;
+ if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
+ sp->config.bimodal = 0;
+ DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
+ dev->name);
+ }
/*
* Make Link state as off at this point, when the Link change
mem_alloc_failed:
free_shared_mem(sp);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (dev_intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
iounmap(sp->bar0);
iounmap(sp->bar1);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (sp->intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}