#include "falcon_hwdefs.h"
#include "falcon_io.h"
#include "mac.h"
-#include "gmii.h"
#include "mdio_10g.h"
#include "phy.h"
#include "boards.h"
* MAC operations
*
*************************************************************************/
-static int falcon_reset_xmac(struct efx_nic *efx)
-{
- efx_oword_t reg;
- int count;
-
- EFX_POPULATE_OWORD_1(reg, XM_CORE_RST, 1);
- falcon_write(efx, ®, XM_GLB_CFG_REG);
-
- for (count = 0; count < 10000; count++) { /* wait upto 100ms */
- falcon_read(efx, ®, XM_GLB_CFG_REG);
- if (EFX_OWORD_FIELD(reg, XM_CORE_RST) == 0)
- return 0;
- udelay(10);
- }
-
- EFX_ERR(efx, "timed out waiting for XMAC core reset\n");
- return -ETIMEDOUT;
-}
/* Configure the XAUI driver that is an output from Falcon */
static void falcon_setup_xaui(struct efx_nic *efx)
return -ETIMEDOUT;
}
-static bool falcon_xgmii_status(struct efx_nic *efx)
+static void falcon_mask_status_intr(struct efx_nic *efx, bool enable)
{
efx_oword_t reg;
- if (falcon_rev(efx) < FALCON_REV_B0)
- return true;
-
- /* The ISR latches, so clear it and re-read */
- falcon_read(efx, ®, XM_MGT_INT_REG_B0);
- falcon_read(efx, ®, XM_MGT_INT_REG_B0);
-
- if (EFX_OWORD_FIELD(reg, XM_LCLFLT) ||
- EFX_OWORD_FIELD(reg, XM_RMTFLT)) {
- EFX_INFO(efx, "MGT_INT: "EFX_DWORD_FMT"\n", EFX_DWORD_VAL(reg));
- return false;
- }
-
- return true;
-}
+ if ((falcon_rev(efx) != FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+ return;
-static void falcon_mask_status_intr(struct efx_nic *efx, bool enable)
-{
- efx_oword_t reg;
+ /* We expect xgmii faults if the wireside link is up */
+ if (!EFX_WORKAROUND_5147(efx) || !efx->link_up)
+ return;
- if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+ /* We can only use this interrupt to signal the negative edge of
+ * xaui_align [we have to poll the positive edge]. */
+ if (!efx->mac_up)
return;
/* Flush the ISR */
falcon_write(efx, ®, XM_MGT_INT_MSK_REG_B0);
}
-int falcon_init_xmac(struct efx_nic *efx)
-{
- int rc;
-
- /* Initialize the PHY first so the clock is around */
- rc = efx->phy_op->init(efx);
- if (rc)
- goto fail1;
-
- rc = falcon_reset_xaui(efx);
- if (rc)
- goto fail2;
-
- /* Wait again. Give the PHY and MAC time to come back */
- schedule_timeout_uninterruptible(HZ / 10);
-
- rc = falcon_reset_xmac(efx);
- if (rc)
- goto fail2;
-
- falcon_mask_status_intr(efx, true);
- return 0;
-
- fail2:
- efx->phy_op->fini(efx);
- fail1:
- return rc;
-}
-
+/* Get status of XAUI link */
bool falcon_xaui_link_ok(struct efx_nic *efx)
{
efx_oword_t reg;
EFX_SET_OWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET);
falcon_write(efx, ®, XX_CORE_STAT_REG);
- /* If the link is up, then check the phy side of the xaui link
- * (error conditions from the wire side propoagate back through
- * the phy to the xaui side). */
- if (efx->link_up && link_ok) {
+ /* If the link is up, then check the phy side of the xaui link */
+ if (efx->link_up && link_ok)
if (efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS))
link_ok = mdio_clause45_phyxgxs_lane_sync(efx);
- }
-
- /* If the PHY and XAUI links are up, then check the mac's xgmii
- * fault state */
- if (efx->link_up && link_ok)
- link_ok = falcon_xgmii_status(efx);
return link_ok;
}
{
unsigned int max_frame_len;
efx_oword_t reg;
- bool rx_fc = !!(efx->flow_control & EFX_FC_RX);
+ bool rx_fc = !!(efx->link_fc & EFX_FC_RX);
/* Configure MAC - cut-thru mode is hard wired on */
EFX_POPULATE_DWORD_3(reg,
/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails
* to come back up. Bash it until it comes back up */
-static bool falcon_check_xaui_link_up(struct efx_nic *efx)
+static void falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
{
- int max_tries, tries;
- tries = EFX_WORKAROUND_5147(efx) ? 5 : 1;
- max_tries = tries;
+ efx->mac_up = falcon_xaui_link_ok(efx);
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
- (efx->phy_type == PHY_TYPE_NONE) ||
efx_phy_mode_disabled(efx->phy_mode))
- return false;
-
- while (tries) {
- if (falcon_xaui_link_ok(efx))
- return true;
+ /* XAUI link is expected to be down */
+ return;
- EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
- __func__, tries);
+ while (!efx->mac_up && tries) {
+ EFX_LOG(efx, "bashing xaui\n");
falcon_reset_xaui(efx);
udelay(200);
- tries--;
- }
- EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
- max_tries);
- return false;
+ efx->mac_up = falcon_xaui_link_ok(efx);
+ --tries;
+ }
}
-void falcon_reconfigure_xmac(struct efx_nic *efx)
+static void falcon_reconfigure_xmac(struct efx_nic *efx)
{
- bool xaui_link_ok;
-
falcon_mask_status_intr(efx, false);
- falcon_deconfigure_mac_wrapper(efx);
-
- /* Reconfigure the PHY, disabling transmit in mac level loopback. */
- if (LOOPBACK_INTERNAL(efx))
- efx->phy_mode |= PHY_MODE_TX_DISABLED;
- else
- efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
- efx->phy_op->reconfigure(efx);
-
falcon_reconfigure_xgxs_core(efx);
falcon_reconfigure_xmac_core(efx);
falcon_reconfigure_mac_wrapper(efx);
- /* Ensure XAUI link is up */
- xaui_link_ok = falcon_check_xaui_link_up(efx);
-
- if (xaui_link_ok && efx->link_up)
- falcon_mask_status_intr(efx, true);
-}
-
-void falcon_fini_xmac(struct efx_nic *efx)
-{
- /* Isolate the MAC - PHY */
- falcon_deconfigure_mac_wrapper(efx);
-
- /* Potentially power down the PHY */
- efx->phy_op->fini(efx);
+ falcon_check_xaui_link_up(efx, 5);
+ falcon_mask_status_intr(efx, true);
}
-void falcon_update_stats_xmac(struct efx_nic *efx)
+static void falcon_update_stats_xmac(struct efx_nic *efx)
{
struct efx_mac_stats *mac_stats = &efx->mac_stats;
int rc;
mac_stats->rx_control * 64);
}
-int falcon_check_xmac(struct efx_nic *efx)
+static void falcon_xmac_irq(struct efx_nic *efx)
{
- bool xaui_link_ok;
- int rc;
-
- if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
- efx_phy_mode_disabled(efx->phy_mode))
- return 0;
-
- falcon_mask_status_intr(efx, false);
- xaui_link_ok = falcon_xaui_link_ok(efx);
-
- if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
- falcon_reset_xaui(efx);
-
- /* Call the PHY check_hw routine */
- rc = efx->phy_op->check_hw(efx);
-
- /* Unmask interrupt if everything was (and still is) ok */
- if (xaui_link_ok && efx->link_up)
- falcon_mask_status_intr(efx, true);
-
- return rc;
-}
-
-/* Simulate a PHY event */
-void falcon_xmac_sim_phy_event(struct efx_nic *efx)
-{
- efx_qword_t phy_event;
-
- EFX_POPULATE_QWORD_2(phy_event,
- EV_CODE, GLOBAL_EV_DECODE,
- XG_PHY_INTR, 1);
- falcon_generate_event(&efx->channel[0], &phy_event);
+ /* The XGMII link has a transient fault, which indicates either:
+ * - there's a transient xgmii fault
+ * - falcon's end of the xaui link may need a kick
+ * - the wire-side link may have gone down, but the lasi/poll()
+ * hasn't noticed yet.
+ *
+ * We only want to even bother polling XAUI if we're confident it's
+ * not (1) or (3). In both cases, the only reliable way to spot this
+ * is to wait a bit. We do this here by forcing the mac link state
+ * to down, and waiting for the mac poll to come round and check
+ */
+ efx->mac_up = false;
}
-int falcon_xmac_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void falcon_poll_xmac(struct efx_nic *efx)
{
- mdio_clause45_get_settings(efx, ecmd);
- ecmd->transceiver = XCVR_INTERNAL;
- ecmd->phy_address = efx->mii.phy_id;
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->duplex = DUPLEX_FULL;
- return 0;
-}
+ if (!EFX_WORKAROUND_5147(efx) || !efx->link_up || efx->mac_up)
+ return;
-int falcon_xmac_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
- if (ecmd->transceiver != XCVR_INTERNAL)
- return -EINVAL;
- if (ecmd->autoneg != AUTONEG_DISABLE)
- return -EINVAL;
- if (ecmd->duplex != DUPLEX_FULL)
- return -EINVAL;
-
- return mdio_clause45_set_settings(efx, ecmd);
+ falcon_mask_status_intr(efx, false);
+ falcon_check_xaui_link_up(efx, 1);
+ falcon_mask_status_intr(efx, true);
}
-
-int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control)
-{
- bool reset;
-
- if (flow_control & EFX_FC_AUTO) {
- EFX_LOG(efx, "10G does not support flow control "
- "autonegotiation\n");
- return -EINVAL;
- }
-
- if ((flow_control & EFX_FC_TX) && !(flow_control & EFX_FC_RX))
- return -EINVAL;
-
- /* TX flow control may automatically turn itself off if the
- * link partner (intermittently) stops responding to pause
- * frames. There isn't any indication that this has happened,
- * so the best we do is leave it up to the user to spot this
- * and fix it be cycling transmit flow control on this end. */
- reset = ((flow_control & EFX_FC_TX) &&
- !(efx->flow_control & EFX_FC_TX));
- if (EFX_WORKAROUND_11482(efx) && reset) {
- if (falcon_rev(efx) >= FALCON_REV_B0) {
- /* Recover by resetting the EM block */
- if (efx->link_up)
- falcon_drain_tx_fifo(efx);
- } else {
- /* Schedule a reset to recover */
- efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
- }
- }
-
- efx->flow_control = flow_control;
-
- return 0;
-}
+struct efx_mac_operations falcon_xmac_operations = {
+ .reconfigure = falcon_reconfigure_xmac,
+ .update_stats = falcon_update_stats_xmac,
+ .irq = falcon_xmac_irq,
+ .poll = falcon_poll_xmac,
+};