]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/net/sky2.c
Merge branch 'slub-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm
[linux-2.6-omap-h63xx.git] / drivers / net / sky2.c
index 626190eb91e7ba567ea3c35ef9d26dac2aaf9b7e..dc062367a1c8b515138b7023921d81e31eac82d4 100644 (file)
@@ -623,6 +623,7 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
        static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
        static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
+       sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
        reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
        /* Turn on/off phy power saving */
        if (onoff)
@@ -634,7 +635,8 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
                reg1 |= coma_mode[port];
 
        sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-       reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+       sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+       sky2_pci_read32(hw, PCI_DEV_REG1);
 
        udelay(100);
 }
@@ -1422,6 +1424,7 @@ static int sky2_up(struct net_device *dev)
        imask |= portirq_msk[port];
        sky2_write32(hw, B0_IMSK, imask);
 
+       sky2_set_multicast(dev);
        return 0;
 
 err_out:
@@ -2436,6 +2439,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
        if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
                u16 pci_err;
 
+               sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
                pci_err = sky2_pci_read16(hw, PCI_STATUS);
                if (net_ratelimit())
                        dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2443,12 +2447,14 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
                sky2_pci_write16(hw, PCI_STATUS,
                                      pci_err | PCI_STATUS_ERROR_BITS);
+               sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
        }
 
        if (status & Y2_IS_PCI_EXP) {
                /* PCI-Express uncorrectable Error occurred */
                u32 err;
 
+               sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
                err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
                sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
                             0xfffffffful);
@@ -2456,6 +2462,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
                        dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
                sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+               sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
        }
 
        if (status & Y2_HWE_L1_MASK)
@@ -2831,6 +2838,7 @@ static void sky2_reset(struct sky2_hw *hw)
        }
 
        sky2_power_on(hw);
+       sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
        for (i = 0; i < hw->ports; i++) {
                sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -3554,8 +3562,6 @@ static int sky2_set_ringparam(struct net_device *dev,
                err = sky2_up(dev);
                if (err)
                        dev_close(dev);
-               else
-                       sky2_set_multicast(dev);
        }
 
        return err;
@@ -4389,8 +4395,6 @@ static int sky2_resume(struct pci_dev *pdev)
                                dev_close(dev);
                                goto out;
                        }
-
-                       sky2_set_multicast(dev);
                }
        }