tg3: Fix 5761 WOL

[linux-2.6-omap-h63xx.git] / drivers / net / sky2.h

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index ffe9b8a50a1b75943d1d9b9fec9a07a917b2e71b..c0a5eea20007d461660d79f176d2eed00c7e7903 100644 (file)
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -425,12 +425,13 @@ enum {
 
 /*     B2_CHIP_ID               8 bit  Chip Identification Number */
 enum {
-       CHIP_ID_YUKON_XL   = 0xb3, /* Chip ID for YUKON-2 XL */
-       CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */
-       CHIP_ID_YUKON_EX   = 0xb5, /* Chip ID for YUKON-2 Extreme */
-       CHIP_ID_YUKON_EC   = 0xb6, /* Chip ID for YUKON-2 EC */
-       CHIP_ID_YUKON_FE   = 0xb7, /* Chip ID for YUKON-2 FE */
-       CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */
+       CHIP_ID_YUKON_XL   = 0xb3, /* YUKON-2 XL */
+       CHIP_ID_YUKON_EC_U = 0xb4, /* YUKON-2 EC Ultra */
+       CHIP_ID_YUKON_EX   = 0xb5, /* YUKON-2 Extreme */
+       CHIP_ID_YUKON_EC   = 0xb6, /* YUKON-2 EC */
+       CHIP_ID_YUKON_FE   = 0xb7, /* YUKON-2 FE */
+       CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
+       CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
 };
 enum yukon_ec_rev {
        CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
@@ -1317,18 +1318,21 @@ enum {
        BLINK_670MS     = 4,/* 670 ms */
 };
 
-/**** PHY_MARV_LED_OVER    16 bit r/w LED control */
-enum {
-       PHY_M_LED_MO_DUP  = 3<<10,/* Bit 11..10:  Duplex */
-       PHY_M_LED_MO_10   = 3<<8, /* Bit  9.. 8:  Link 10 */
-       PHY_M_LED_MO_100  = 3<<6, /* Bit  7.. 6:  Link 100 */
-       PHY_M_LED_MO_1000 = 3<<4, /* Bit  5.. 4:  Link 1000 */
-       PHY_M_LED_MO_RX   = 3<<2, /* Bit  3.. 2:  Rx */
-       PHY_M_LED_MO_TX   = 3<<0, /* Bit  1.. 0:  Tx */
+/*****  PHY_MARV_LED_OVER      16 bit r/w      Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x)  ((x)<<14)       /* Bit 15..14:  SGMII AN Timer */
+
+#define PHY_M_LED_MO_DUP(x)    ((x)<<10)       /* Bit 11..10:  Duplex */
+#define PHY_M_LED_MO_10(x)     ((x)<<8)        /* Bit  9.. 8:  Link 10 */
+#define PHY_M_LED_MO_100(x)    ((x)<<6)        /* Bit  7.. 6:  Link 100 */
+#define PHY_M_LED_MO_1000(x)   ((x)<<4)        /* Bit  5.. 4:  Link 1000 */
+#define PHY_M_LED_MO_RX(x)     ((x)<<2)        /* Bit  3.. 2:  Rx */
+#define PHY_M_LED_MO_TX(x)     ((x)<<0)        /* Bit  1.. 0:  Tx */
 
-       PHY_M_LED_ALL     = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 
-                           | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000
-                           | PHY_M_LED_MO_RX,
+enum led_mode {
+       MO_LED_NORM  = 0,
+       MO_LED_BLINK = 1,
+       MO_LED_OFF   = 2,
+       MO_LED_ON    = 3,
 };
 
 /*****  PHY_MARV_EXT_CTRL_2    16 bit r/w      Ext. PHY Specific Ctrl 2 *****/
@@ -1962,13 +1966,13 @@ struct sky2_status_le {
 struct tx_ring_info {
        struct sk_buff  *skb;
        DECLARE_PCI_UNMAP_ADDR(mapaddr);
-       DECLARE_PCI_UNMAP_ADDR(maplen);
+       DECLARE_PCI_UNMAP_LEN(maplen);
 };
 
 struct rx_ring_info {
        struct sk_buff  *skb;
        dma_addr_t      data_addr;
-       DECLARE_PCI_UNMAP_ADDR(data_size);
+       DECLARE_PCI_UNMAP_LEN(data_size);
        dma_addr_t      frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
 };
 
@@ -2044,7 +2048,7 @@ struct sky2_hw {
 #define SKY2_HW_FIBRE_PHY      0x00000002
 #define SKY2_HW_GIGABIT                0x00000004
 #define SKY2_HW_NEWER_PHY      0x00000008
-#define SKY2_HW_FIFO_HANG_CHECK        0x00000010
+#define SKY2_HW_RAM_BUFFER     0x00000010
 #define SKY2_HW_NEW_LE         0x00000020      /* new LSOv2 format */
 #define SKY2_HW_AUTO_TX_SUM    0x00000040      /* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL  0x00000080      /* additional PHY power regs */