net: libertas sdio driver

[linux-2.6-omap-h63xx.git] / drivers / net / sundance.c

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e1f912d04043e82c3de70201ed87d0ceb7b097f2..ff98f5d597f117294ec870cce330bfd339a63bca 100644 (file)
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -397,7 +397,6 @@ struct netdev_private {
        unsigned char phys[MII_CNT];            /* MII device addresses, only first one used. */
        struct pci_dev *pci_dev;
        void __iomem *base;
-       unsigned char pci_rev_id;
 };
 
 /* The station address location in the EEPROM. */
@@ -467,8 +466,8 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 #else
        int bar = 1;
 #endif
-       int phy, phy_idx = 0;
-
+       int phy, phy_end, phy_idx = 0;
+       DECLARE_MAC_BUF(mac);
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
@@ -486,7 +485,6 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
        dev = alloc_etherdev(sizeof(*np));
        if (!dev)
                return -ENOMEM;
-       SET_MODULE_OWNER(dev);
        SET_NETDEV_DEV(dev, &pdev->dev);
 
        if (pci_request_regions(pdev, DRV_NAME))
@@ -544,25 +542,29 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
        dev->change_mtu = &change_mtu;
        pci_set_drvdata(pdev, dev);
 
-       pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
-
        i = register_netdev(dev);
        if (i)
                goto err_out_unmap_rx;
 
-       printk(KERN_INFO "%s: %s at %p, ",
-                  dev->name, pci_id_tbl[chip_idx].name, ioaddr);
-       for (i = 0; i < 5; i++)
-                       printk("%2.2x:", dev->dev_addr[i]);
-       printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
+       printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n",
+              dev->name, pci_id_tbl[chip_idx].name, ioaddr,
+              print_mac(mac, dev->dev_addr), irq);
 
        np->phys[0] = 1;                /* Default setting */
        np->mii_preamble_required++;
+
        /*
         * It seems some phys doesn't deal well with address 0 being accessed
-        * first, so leave address zero to the end of the loop (32 & 31).
+        * first
         */
-       for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
+       if (sundance_pci_tbl[np->chip_id].device == 0x0200) {
+               phy = 0;
+               phy_end = 31;
+       } else {
+               phy = 1;
+               phy_end = 32;   /* wraps to zero, due to 'phy & 0x1f' */
+       }
+       for (; phy <= phy_end && phy_idx < MII_CNT; phy++) {
                int phyx = phy & 0x1f;
                int mii_status = mdio_read(dev, phyx, MII_BMSR);
                if (mii_status != 0xffff  &&  mii_status != 0x0000) {
@@ -828,7 +830,7 @@ static int netdev_open(struct net_device *dev)
        iowrite8(100, ioaddr + RxDMAPollPeriod);
        iowrite8(127, ioaddr + TxDMAPollPeriod);
        /* Fix DFE-580TX packet drop issue */
-       if (np->pci_rev_id >= 0x14)
+       if (np->pci_dev->revision >= 0x14)
                iowrite8(0x01, ioaddr + DebugCtrl1);
        netif_start_queue(dev);
 
@@ -1194,7 +1196,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
                        hw_frame_id = ioread8(ioaddr + TxFrameId);
                }
 
-               if (np->pci_rev_id >= 0x14) {
+               if (np->pci_dev->revision >= 0x14) {
                        spin_lock(&np->lock);
                        for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
                                int entry = np->dirty_tx % TX_RING_SIZE;
@@ -1313,7 +1315,7 @@ static void rx_poll(unsigned long data)
                                                            np->rx_buf_sz,
                                                            PCI_DMA_FROMDEVICE);
 
-                               eth_copy_and_sum(skb, np->rx_skbuff[entry]->data, pkt_len, 0);
+                               skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
                                pci_dma_sync_single_for_device(np->pci_dev,
                                                               desc->frag[0].addr,
                                                               np->rx_buf_sz,
@@ -1589,7 +1591,6 @@ static const struct ethtool_ops ethtool_ops = {
        .get_link = get_link,
        .get_msglevel = get_msglevel,
        .set_msglevel = set_msglevel,
-       .get_perm_addr = ethtool_op_get_perm_addr,
 };
 
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)