#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.94"
-#define DRV_MODULE_RELDATE "August 14, 2008"
+#define DRV_MODULE_VERSION "3.95"
+#define DRV_MODULE_RELDATE "November 3, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
return 0;
}
-static void tg3_mdio_config(struct tg3 *tp)
+static void tg3_mdio_config_5785(struct tg3 *tp)
{
u32 val;
+ struct phy_device *phydev;
+
+ phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+ switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
+ case TG3_PHY_ID_BCM50610:
+ val = MAC_PHYCFG2_50610_LED_MODES;
+ break;
+ case TG3_PHY_ID_BCMAC131:
+ val = MAC_PHYCFG2_AC131_LED_MODES;
+ break;
+ case TG3_PHY_ID_RTL8211C:
+ val = MAC_PHYCFG2_RTL8211C_LED_MODES;
+ break;
+ case TG3_PHY_ID_RTL8201E:
+ val = MAC_PHYCFG2_RTL8201E_LED_MODES;
+ break;
+ default:
+ return;
+ }
+
+ if (phydev->interface != PHY_INTERFACE_MODE_RGMII) {
+ tw32(MAC_PHYCFG2, val);
+
+ val = tr32(MAC_PHYCFG1);
+ val &= ~MAC_PHYCFG1_RGMII_INT;
+ tw32(MAC_PHYCFG1, val);
- if (tp->mdio_bus->phy_map[PHY_ADDR]->interface !=
- PHY_INTERFACE_MODE_RGMII)
return;
+ }
+
+ if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE))
+ val |= MAC_PHYCFG2_EMODE_MASK_MASK |
+ MAC_PHYCFG2_FMODE_MASK_MASK |
+ MAC_PHYCFG2_GMODE_MASK_MASK |
+ MAC_PHYCFG2_ACT_MASK_MASK |
+ MAC_PHYCFG2_QUAL_MASK_MASK |
+ MAC_PHYCFG2_INBAND_ENABLE;
+
+ tw32(MAC_PHYCFG2, val);
val = tr32(MAC_PHYCFG1) & ~(MAC_PHYCFG1_RGMII_EXT_RX_DEC |
MAC_PHYCFG1_RGMII_SND_STAT_EN);
}
tw32(MAC_PHYCFG1, val | MAC_PHYCFG1_RGMII_INT | MAC_PHYCFG1_TXC_DRV);
- val = tr32(MAC_PHYCFG2) & ~(MAC_PHYCFG2_INBAND_ENABLE);
- if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE))
- val |= MAC_PHYCFG2_INBAND_ENABLE;
- tw32(MAC_PHYCFG2, val);
-
val = tr32(MAC_EXT_RGMII_MODE);
val &= ~(MAC_RGMII_MODE_RX_INT_B |
MAC_RGMII_MODE_RX_QUALITY |
MAC_RGMII_MODE_TX_ENABLE |
MAC_RGMII_MODE_TX_LOWPWR |
MAC_RGMII_MODE_TX_RESET);
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE) {
+ if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)) {
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
val |= MAC_RGMII_MODE_RX_INT_B |
MAC_RGMII_MODE_RX_QUALITY |
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED)
- tg3_mdio_config(tp);
+ if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+ tg3_mdio_config_5785(tp);
}
static void tg3_mdio_stop(struct tg3 *tp)
if (i) {
printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
tp->dev->name, i);
+ mdiobus_free(tp->mdio_bus);
return i;
}
- tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
-
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
- switch (phydev->phy_id) {
+ if (!phydev || !phydev->drv) {
+ printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
+ mdiobus_unregister(tp->mdio_bus);
+ mdiobus_free(tp->mdio_bus);
+ return -ENODEV;
+ }
+
+ switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
case TG3_PHY_ID_BCM50610:
- phydev->interface = PHY_INTERFACE_MODE_RGMII;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
+ /* fallthru */
+ case TG3_PHY_ID_RTL8211C:
+ phydev->interface = PHY_INTERFACE_MODE_RGMII;
break;
+ case TG3_PHY_ID_RTL8201E:
case TG3_PHY_ID_BCMAC131:
phydev->interface = PHY_INTERFACE_MODE_MII;
break;
}
- tg3_mdio_config(tp);
+ tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+ tg3_mdio_config_5785(tp);
return 0;
}
udelay(40);
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
+ if (phydev->speed == SPEED_10)
+ tw32(MAC_MI_STAT,
+ MAC_MI_STAT_10MBPS_MODE |
+ MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
+ else
+ tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
+ }
+
if (phydev->speed == SPEED_1000 && phydev->duplex == DUPLEX_HALF)
tw32(MAC_TX_LENGTHS,
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
/* Attach the MAC to the PHY. */
- phydev = phy_connect(tp->dev, phydev->dev.bus_id, tg3_adjust_link,
+ phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
phydev->dev_flags, phydev->interface);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
return PTR_ERR(phydev);
}
- tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED;
-
/* Mask with MAC supported features. */
- phydev->supported &= (PHY_GBIT_FEATURES |
- SUPPORTED_Pause |
- SUPPORTED_Asym_Pause);
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ phydev->supported &= (PHY_GBIT_FEATURES |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ phydev->supported &= (PHY_BASIC_FEATURES |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+ default:
+ phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
+ return -EINVAL;
+ }
- phydev->advertising = phydev->supported;
+ tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED;
- printk(KERN_INFO
- "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
- tp->dev->name, phydev->drv->name, phydev->dev.bus_id);
+ phydev->advertising = phydev->supported;
return 0;
}
tw32(TG3_CPMU_CTRL, cpmuctrl);
}
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
+ GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
u32 val;
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
static int tg3_nvram_lock(struct tg3 *);
static void tg3_nvram_unlock(struct tg3 *);
-static void tg3_power_down_phy(struct tg3 *tp)
+static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
{
u32 val;
tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
udelay(40);
return;
- } else if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
+ } else if (do_low_power) {
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+
+ tg3_writephy(tp, MII_TG3_AUX_CTRL,
+ MII_TG3_AUXCTL_SHDWSEL_PWRCTL |
+ MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+ MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
+ MII_TG3_AUXCTL_PCTL_VREG_11V);
}
/* The PHY should not be powered down on some chips because
(tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
return;
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
+ GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
val |= CPMU_LSPD_1000MB_MACCLK_12_5;
static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
{
u32 misc_host_ctrl;
+ bool device_should_wake, do_low_power;
/* Make sure register accesses (indirect or otherwise)
* will function correctly.
tw32(TG3PCI_MISC_HOST_CTRL,
misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
+ device_should_wake = pci_pme_capable(tp->pdev, state) &&
+ device_may_wakeup(&tp->pdev->dev) &&
+ (tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+ do_low_power = false;
if ((tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) &&
!tp->link_config.phy_is_low_power) {
struct phy_device *phydev;
- u32 advertising;
+ u32 phyid, advertising;
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
ADVERTISED_10baseT_Half;
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) {
+ device_should_wake) {
if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
advertising |=
ADVERTISED_100baseT_Half |
phydev->advertising = advertising;
phy_start_aneg(phydev);
+
+ phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask;
+ if (phyid != TG3_PHY_ID_BCMAC131) {
+ phyid &= TG3_PHY_OUI_MASK;
+ if (phyid == TG3_PHY_OUI_1 &&
+ phyid == TG3_PHY_OUI_2 &&
+ phyid == TG3_PHY_OUI_3)
+ do_low_power = true;
+ }
}
} else {
+ do_low_power = false;
+
if (tp->link_config.phy_is_low_power == 0) {
tp->link_config.phy_is_low_power = 1;
tp->link_config.orig_speed = tp->link_config.speed;
WOL_DRV_WOL |
WOL_SET_MAGIC_PKT);
- if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
+ if (device_should_wake) {
u32 mac_mode;
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
- if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
+ if (do_low_power) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
udelay(40);
}
if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
tw32(MAC_LED_CTRL, tp->led_ctrl);
- if (pci_pme_capable(tp->pdev, state) &&
- (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) {
- mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
- if (((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) &&
- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
- (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
- mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
- }
+ mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
+ if (((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) &&
+ ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
+ (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
+ mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
mac_mode |= tp->mac_mode &
}
}
- if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
+ if (!(device_should_wake) &&
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
- tg3_power_down_phy(tp);
+ tg3_power_down_phy(tp, do_low_power);
tg3_frob_aux_power(tp);
tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
- if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)
+ if (device_should_wake)
pci_enable_wake(tp->pdev, state, true);
/* Finally, set the new power state. */
err = tg3_setup_copper_phy(tp, force_reset);
}
- if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
u32 val, scale;
val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
#endif
netif_receive_skb(skb);
- tp->dev->last_rx = jiffies;
received++;
budget--;
pci_write_config_word(tp->pdev, PCI_COMMAND, tp->pci_cmd);
- if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
- pcie_set_readrq(tp->pdev, 4096);
- else {
- pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
- tp->pci_cacheline_sz);
- pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
- tp->pci_lat_timer);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
+ if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+ pcie_set_readrq(tp->pdev, 4096);
+ else {
+ pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
+ tp->pci_cacheline_sz);
+ pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
+ tp->pci_lat_timer);
+ }
}
/* Make sure PCI-X relaxed ordering bit is clear. */
pci_write_config_dword(tp->pdev, 0xc4,
cfg_val | (1 << 15));
}
- /* Set PCIE max payload size and clear error status. */
- pci_write_config_dword(tp->pdev, 0xd8, 0xf5000);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785)
+ /* Set PCIE max payload size and clear error status. */
+ pci_write_config_dword(tp->pdev, 0xd8, 0xf5000);
}
tg3_restore_pci_state(tp);
tg3_write_sig_legacy(tp, RESET_KIND_INIT);
- if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
val = tr32(TG3_CPMU_CTRL);
val &= ~(CPMU_CTRL_LINK_AWARE_MODE | CPMU_CTRL_LINK_IDLE_MODE);
tw32(TG3_CPMU_CTRL, val);
return err;
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
/* This value is determined during the probe time DMA
* engine test, tg3_test_dma.
*/
else
wol->supported = 0;
wol->wolopts = 0;
- if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)
+ if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
+ device_can_wakeup(&tp->pdev->dev))
wol->wolopts = WAKE_MAGIC;
memset(&wol->sopass, 0, sizeof(wol->sopass));
}
(val & VCPU_CFGSHDW_WOL_MAGPKT) &&
device_may_wakeup(&tp->pdev->dev))
tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
- return;
+ goto done;
}
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
}
- if (nic_cfg & NIC_SRAM_DATA_CFG_APE_ENABLE)
+
+ if ((nic_cfg & NIC_SRAM_DATA_CFG_APE_ENABLE) &&
+ (tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
tp->tg3_flags3 |= TG3_FLG3_ENABLE_APE;
+
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES &&
!(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
- (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) &&
- device_may_wakeup(&tp->pdev->dev))
+ (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE))
tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
if (cfg2 & (1 << 17))
if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_TX_EN)
tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_TX_EN;
}
+done:
+ device_init_wakeup(&tp->pdev->dev, tp->tg3_flags & TG3_FLAG_WOL_CAP);
+ device_set_wakeup_enable(&tp->pdev->dev,
+ tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
}
static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd)
if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN)
tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
}
- }
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+ tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
/* If we have an AMD 762 or VIA K8T800 chipset, write
* reordering to the mailbox registers done by the host
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
- if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5784_A1 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5761_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5761_A1)
- tp->tg3_flags3 |= TG3_FLG3_5761_5784_AX_FIXES;
- }
-
/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
* GPIO1 driven high will bring 5700's external PHY out of reset.
* It is also used as eeprom write protect on LOMs.
goto err_out_apeunmap;
}
- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] "
- "(%s) %s Ethernet %pM\n",
+ printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
dev->name,
tp->board_part_number,
tp->pci_chip_rev_id,
- tg3_phy_string(tp),
tg3_bus_string(tp, str),
- ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
- ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
- "10/100/1000Base-T")),
dev->dev_addr);
- printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] "
- "MIirq[%d] ASF[%d] WireSpeed[%d] TSOcap[%d]\n",
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
+ printk(KERN_INFO
+ "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ tp->dev->name,
+ tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
+ dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev));
+ else
+ printk(KERN_INFO
+ "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
+ tp->dev->name, tg3_phy_string(tp),
+ ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
+ ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
+ "10/100/1000Base-T")),
+ (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
+
+ printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
dev->name,
(tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
(tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
(tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
dev->name, tp->dma_rwctrl,
projects / linux-2.6-omap-h63xx.git / blobdiff