priv->oldspeed = 0;
priv->oldduplex = -1;
- snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->ug_info->mdio_bus,
- priv->ug_info->phy_address);
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
+ priv->ug_info->phy_address);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
struct ucc_fast_private *uccf;
u32 cecr_subblock;
u32 temp;
+ int i = 10;
uccf = ugeth->uccf;
/* Wait for command to complete */
do {
+ msleep(10);
temp = in_be32(uccf->p_ucce);
- } while (!(temp & UCCE_GRA));
+ } while (!(temp & UCCE_GRA) && --i);
uccf->stopped_tx = 1;
struct ucc_fast_private *uccf;
u32 cecr_subblock;
u8 temp;
+ int i = 10;
uccf = ugeth->uccf;
ucc_num);
qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
QE_CR_PROTOCOL_ETHERNET, 0);
-
+ msleep(10);
temp = in_8(&ugeth->p_rx_glbl_pram->rxgstpack);
- } while (!(temp & GRACEFUL_STOP_ACKNOWLEDGE_RX));
+ } while (!(temp & GRACEFUL_STOP_ACKNOWLEDGE_RX) && --i);
uccf->stopped_rx = 1;
return 0;
}
-/* ucc_geth_timeout gets called when a packet has not been
- * transmitted after a set amount of time.
- * For now, assume that clearing out all the structures, and
- * starting over will fix the problem. */
-static void ucc_geth_timeout(struct net_device *dev)
+static int ucc_geth_close(struct net_device *dev);
+static int ucc_geth_open(struct net_device *dev);
+
+/* Reopen device. This will reset the MAC and PHY. */
+static void ucc_geth_timeout_work(struct work_struct *work)
{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_private *ugeth;
+ struct net_device *dev;
+
+ ugeth = container_of(work, struct ucc_geth_private, timeout_work);
+ dev = ugeth->dev;
ugeth_vdbg("%s: IN", __func__);
ugeth_dump_regs(ugeth);
if (dev->flags & IFF_UP) {
- ucc_geth_stop(ugeth);
- ucc_geth_startup(ugeth);
+ /*
+ * Must reset MAC *and* PHY. This is done by reopening
+ * the device.
+ */
+ ucc_geth_close(dev);
+ ucc_geth_open(dev);
}
netif_tx_schedule_all(dev);
}
+/*
+ * ucc_geth_timeout gets called when a packet has not been
+ * transmitted after a set amount of time.
+ */
+static void ucc_geth_timeout(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+
+ netif_carrier_off(dev);
+ schedule_work(&ugeth->timeout_work);
+}
+
/* This is called by the kernel when a frame is ready for transmission. */
/* It is pointed to by the dev->hard_start_xmit function pointer */
static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
netif_receive_skb(skb);
}
- ugeth->dev->last_rx = jiffies;
-
skb = get_new_skb(ugeth, bd);
if (!skb) {
if (netif_msg_rx_err(ugeth))
dev->hard_start_xmit = ucc_geth_start_xmit;
dev->tx_timeout = ucc_geth_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
+ INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, UCC_GETH_DEV_WEIGHT);
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ucc_netpoll;