version. He may or may not be interested in bug reports on this
code. You can find his versions at:
http://www.scyld.com/network/via-rhine.html
-
-
- Linux kernel version history:
-
- LK1.1.0:
- - Jeff Garzik: softnet 'n stuff
-
- LK1.1.1:
- - Justin Guyett: softnet and locking fixes
- - Jeff Garzik: use PCI interface
-
- LK1.1.2:
- - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
-
- LK1.1.3:
- - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
- code) update "Theory of Operation" with
- softnet/locking changes
- - Dave Miller: PCI DMA and endian fixups
- - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
-
- LK1.1.4:
- - Urban Widmark: fix gcc 2.95.2 problem and
- remove writel's to fixed address 0x7c
-
- LK1.1.5:
- - Urban Widmark: mdio locking, bounce buffer changes
- merges from Beckers 1.05 version
- added netif_running_on/off support
-
- LK1.1.6:
- - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
- set netif_running_on/off on startup, del_timer_sync
-
- LK1.1.7:
- - Manfred Spraul: added reset into tx_timeout
-
- LK1.1.9:
- - Urban Widmark: merges from Beckers 1.10 version
- (media selection + eeprom reload)
- - David Vrabel: merges from D-Link "1.11" version
- (disable WOL and PME on startup)
-
- LK1.1.10:
- - Manfred Spraul: use "singlecopy" for unaligned buffers
- don't allocate bounce buffers for !ReqTxAlign cards
-
- LK1.1.11:
- - David Woodhouse: Set dev->base_addr before the first time we call
- wait_for_reset(). It's a lot happier that way.
- Free np->tx_bufs only if we actually allocated it.
-
- LK1.1.12:
- - Martin Eriksson: Allow Memory-Mapped IO to be enabled.
-
- LK1.1.13 (jgarzik):
- - Add ethtool support
- - Replace some MII-related magic numbers with constants
-
- LK1.1.14 (Ivan G.):
- - fixes comments for Rhine-III
- - removes W_MAX_TIMEOUT (unused)
- - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
- is R-I and has Davicom chip, flag is referenced in kernel driver)
- - sends chip_id as a parameter to wait_for_reset since np is not
- initialized on first call
- - changes mmio "else if (chip_id==VT6102)" to "else" so it will work
- for Rhine-III's (documentation says same bit is correct)
- - transmit frame queue message is off by one - fixed
- - adds IntrNormalSummary to "Something Wicked" exclusion list
- so normal interrupts will not trigger the message (src: Donald Becker)
- (Roger Luethi)
- - show confused chip where to continue after Tx error
- - location of collision counter is chip specific
- - allow selecting backoff algorithm (module parameter)
-
- LK1.1.15 (jgarzik):
- - Use new MII lib helper generic_mii_ioctl
-
- LK1.1.16 (Roger Luethi)
- - Etherleak fix
- - Handle Tx buffer underrun
- - Fix bugs in full duplex handling
- - New reset code uses "force reset" cmd on Rhine-II
- - Various clean ups
-
- LK1.1.17 (Roger Luethi)
- - Fix race in via_rhine_start_tx()
- - On errors, wait for Tx engine to turn off before scavenging
- - Handle Tx descriptor write-back race on Rhine-II
- - Force flushing for PCI posted writes
- - More reset code changes
-
- LK1.1.18 (Roger Luethi)
- - No filtering multicast in promisc mode (Edward Peng)
- - Fix for Rhine-I Tx timeouts
-
- LK1.1.19 (Roger Luethi)
- - Increase Tx threshold for unspecified errors
-
- LK1.2.0-2.6 (Roger Luethi)
- - Massive clean-up
- - Rewrite PHY, media handling (remove options, full_duplex, backoff)
- - Fix Tx engine race for good
- - Craig Brind: Zero padded aligned buffers for short packets.
+ [link no longer provides useful info -jgarzik]
*/
#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.2.0-2.6"
-#define DRV_RELDATE "June-10-2004"
+#define DRV_VERSION "1.4.0"
+#define DRV_RELDATE "June-27-2006"
/* A few user-configurable values.
/* Beware of PCI posted writes */
#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
-static struct pci_device_id rhine_pci_tbl[] =
-{
- {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */
- {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */
- {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */
- {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */
+static const struct pci_device_id rhine_pci_tbl[] = {
+ { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
+ { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
+ { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
+ { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
u8 tx_thresh, rx_thresh;
struct mii_if_info mii_if;
- struct work_struct tx_timeout_task;
- struct work_struct check_media_task;
void __iomem *base;
};
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void rhine_tx(struct net_device *dev);
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
- INIT_WORK(&rp->tx_timeout_task,
- (void (*)(void *))rhine_tx_timeout_task, dev);
-
- INIT_WORK(&rp->check_media_task,
- (void (*)(void *))rhine_check_media_task, dev);
-
/* dev->name not defined before register_netdev()! */
rc = register_netdev(dev);
if (rc)
netif_carrier_ok(mii->dev));
}
-static void rhine_check_media_task(struct net_device *dev)
-{
- rhine_check_media(dev, 0);
-}
-
static void init_registers(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
if (quirks & rqRhineI) {
iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
- /* Do not call from ISR! */
- msleep(1);
+ /* Can be called from ISR. Evil. */
+ mdelay(1);
/* 0x80 must be set immediately before turning it off */
iowrite8(0x80, ioaddr + MIICmd);
void __iomem *ioaddr = rp->base;
int rc;
- rc = request_irq(rp->pdev->irq, &rhine_interrupt, SA_SHIRQ, dev->name,
+ rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
dev);
if (rc)
return rc;
}
static void rhine_tx_timeout(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
-
- /*
- * Move bulk of work outside of interrupt context
- */
- schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
/* Calculate the next Tx descriptor entry. */
entry = rp->cur_tx % TX_RING_SIZE;
- if (skb->len < ETH_ZLEN) {
- skb = skb_padto(skb, ETH_ZLEN);
- if (skb == NULL)
- return 0;
- }
+ if (skb_padto(skb, ETH_ZLEN))
+ return 0;
rp->tx_skbuff[entry] = skb;
spin_lock(&rp->lock);
if (intr_status & IntrLinkChange)
- schedule_work(&rp->check_media_task);
+ rhine_check_media(dev, 0);
if (intr_status & IntrStatsMax) {
rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
spin_unlock_irq(&rp->lock);
free_irq(rp->pdev->irq, dev);
-
- flush_scheduled_work();
-
free_rbufs(dev);
free_tbufs(dev);
free_ring(dev);
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, rhine_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
ret = pci_set_power_state(pdev, PCI_D0);
projects / linux-2.6-omap-h63xx.git / blobdiff