# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m && ISA_DMA_API
+ depends on WAN && ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
The driver will be compiled as a module: the
module will be called sealevel.
-config SYNCLINK_SYNCPPP
- tristate "SyncLink HDLC/SYNCPPP support"
- depends on WAN
- help
- Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-
- Normally the SyncLink WAN driver works with the main PPP driver
- <file:drivers/net/ppp_generic.c> and pppd program.
- HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
- <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
- character devices) must also be enabled.
-
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
If unsure, say N.
config HDLC_RAW
- bool "Raw HDLC support"
+ tristate "Raw HDLC support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC over WAN connections.
If unsure, say N.
config HDLC_RAW_ETH
- bool "Raw HDLC Ethernet device support"
+ tristate "Raw HDLC Ethernet device support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC Ethernet device emulation
If unsure, say N.
config HDLC_CISCO
- bool "Cisco HDLC support"
+ tristate "Cisco HDLC support"
depends on HDLC
help
Generic HDLC driver supporting Cisco HDLC over WAN connections.
If unsure, say N.
config HDLC_FR
- bool "Frame Relay support"
+ tristate "Frame Relay support"
depends on HDLC
help
Generic HDLC driver supporting Frame Relay over WAN connections.
If unsure, say N.
config HDLC_PPP
- bool "Synchronous Point-to-Point Protocol (PPP) support"
+ tristate "Synchronous Point-to-Point Protocol (PPP) support"
depends on HDLC
help
Generic HDLC driver supporting PPP over WAN connections.
If unsure, say N.
config HDLC_X25
- bool "X.25 protocol support"
+ tristate "X.25 protocol support"
depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
help
Generic HDLC driver supporting X.25 over WAN connections.
If unsure, say N.
-config VENDOR_SANGOMA
- tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
- ---help---
- Driver for S514-PCI/ISA Synchronous Data Link Adapters (SDLA).
-
- WANPIPE from Sangoma Technologies Inc. <http://www.sangoma.com/>
- is a family of intelligent multiprotocol WAN adapters with data
- transfer rates up to 4Mbps. Cards support:
-
- - X.25, Frame Relay, PPP, Cisco HDLC protocols.
-
- - API for protocols like HDLC (LAPB), HDLC Streaming, X.25,
- Frame Relay and BiSync.
-
- - Ethernet Bridging over Frame Relay protocol.
-
- - MULTILINK PPP
-
- - Async PPP (Modem Dialup)
-
- The next questions will ask you about the protocols you want
- the driver to support.
-
- If you have one or more of these cards, say M to this option;
- and read <file:Documentation/networking/wan-router.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called wanpipe.
-
-config WANPIPE_CHDLC
- bool "WANPIPE Cisco HDLC support"
- depends on VENDOR_SANGOMA
- ---help---
- Connect a WANPIPE card to a leased line using the Cisco HDLC.
-
- - Supports Dual Port Cisco HDLC on the S514-PCI/S508-ISA cards
- which allows user to build applications using the HDLC streaming API.
-
- - CHDLC Streaming MULTILINK PPP that can bind multiple WANPIPE T1
- cards into a single logical channel.
-
- Say Y and the Cisco HDLC support, HDLC streaming API and
- MULTILINK PPP will be included in the driver.
-
-config WANPIPE_FR
- bool "WANPIPE Frame Relay support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a Frame Relay network, or use Frame Relay
- API to develop custom applications.
-
- Contains the Ethernet Bridging over Frame Relay feature, where
- a WANPIPE frame relay link can be directly connected to the Linux
- kernel bridge. The Frame Relay option is supported on S514-PCI
- and S508-ISA cards.
-
- Say Y and the Frame Relay support will be included in the driver.
-
-config WANPIPE_X25
- bool "WANPIPE X.25 support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to an X.25 network.
-
- Includes the X.25 API support for custom applications over the
- X.25 protocol. The X.25 option is supported on S514-PCI and
- S508-ISA cards.
-
- Say Y and the X.25 support will be included in the driver.
-
-config WANPIPE_PPP
- bool "WANPIPE PPP support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a leased line using Point-to-Point
- Protocol (PPP).
-
- The PPP option is supported on S514-PCI/S508-ISA cards.
-
- Say Y and the PPP support will be included in the driver.
-
-config WANPIPE_MULTPPP
- bool "WANPIPE Multi-Port PPP support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a leased line using Point-to-Point
- Protocol (PPP).
-
- Uses in-kernel SyncPPP protocol over the Sangoma HDLC Streaming
- adapter. In this case each Sangoma adapter port can support an
- independent PPP connection. For example, a single Quad-Port PCI
- adapter can support up to four independent PPP links. The PPP
- option is supported on S514-PCI/S508-ISA cards.
-
- Say Y and the Multi-Port PPP support will be included in the driver.
-
config CYCLADES_SYNC
tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
projects / linux-2.6-omap-h63xx.git / blobdiff