event handler.
*/
-static void atmel_config(dev_link_t *link);
-static void atmel_release(dev_link_t *link);
+static int atmel_config(struct pcmcia_device *link);
+static void atmel_release(struct pcmcia_device *link);
/*
The attach() and detach() entry points are used to create and destroy
/*
A linked list of "instances" of the atmelnet device. Each actual
PCMCIA card corresponds to one device instance, and is described
- by one dev_link_t structure (defined in ds.h).
+ by one struct pcmcia_device structure (defined in ds.h).
You may not want to use a linked list for this -- for example, the
- memory card driver uses an array of dev_link_t pointers, where minor
+ memory card driver uses an array of struct pcmcia_device pointers, where minor
device numbers are used to derive the corresponding array index.
*/
example, ethernet cards, modems). In other cases, there may be
many actual or logical devices (SCSI adapters, memory cards with
multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a dev_link_t
+ in a linked list starting at the 'dev' field of a struct pcmcia_device
structure. We allocate them in the card's private data structure,
because they generally shouldn't be allocated dynamically.
======================================================================*/
-static int atmel_attach(struct pcmcia_device *p_dev)
+static int atmel_probe(struct pcmcia_device *p_dev)
{
- dev_link_t *link;
local_info_t *local;
DEBUG(0, "atmel_attach()\n");
- /* Initialize the dev_link_t structure */
- link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
- if (!link) {
- printk(KERN_ERR "atmel_cs: no memory for new device\n");
- return -ENOMEM;
- }
-
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = NULL;
+ p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
- link->conf.Attributes = 0;
- link->conf.Vcc = 50;
- link->conf.IntType = INT_MEMORY_AND_IO;
+ p_dev->conf.Attributes = 0;
+ p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
- kfree (link);
return -ENOMEM;
}
- link->priv = local;
-
- link->handle = p_dev;
- p_dev->instance = link;
-
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- atmel_config(link);
+ p_dev->priv = local;
- return 0;
+ return atmel_config(p_dev);
} /* atmel_attach */
/*======================================================================
======================================================================*/
-static void atmel_detach(struct pcmcia_device *p_dev)
+static void atmel_detach(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(p_dev);
-
DEBUG(0, "atmel_detach(0x%p)\n", link);
- if (link->state & DEV_CONFIG)
- atmel_release(link);
+ atmel_release(link);
kfree(link->priv);
- kfree(link);
}
/*======================================================================
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
-{
- dev_link_t *link = (dev_link_t *)arg;
- if (link->state & DEV_SUSPEND)
- return 0;
- else if (link->state & DEV_PRESENT)
+{
+ struct pcmcia_device *link = (struct pcmcia_device *)arg;
+
+ if (pcmcia_dev_present(link))
return 1;
-
+
return 0;
}
-static void atmel_config(dev_link_t *link)
+static int atmel_config(struct pcmcia_device *link)
{
- client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
u_char buf[64];
struct pcmcia_device_id *did;
- handle = link->handle;
dev = link->priv;
- did = handle_to_dev(handle).driver_data;
+ did = handle_to_dev(link).driver_data;
DEBUG(0, "atmel_config(0x%p)\n", link);
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
-
- /* Configure card */
- link->state |= DEV_CONFIG;
-
+
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cistpl_cftable_entry_t dflt = { 0 };
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
- pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+ if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
+ pcmcia_parse_tuple(link, &tuple, &parse) != 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
+ link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link->handle, &link->io) != 0)
+ if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
/* If we got this far, we're cool! */
break;
next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
}
/*
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
init_atmel_card(link->irq.AssignedIRQ,
link->io.BasePort1,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
- &handle_to_dev(handle),
+ &handle_to_dev(link),
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
/*
At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
+ initialized and arranged in a linked list at link->dev_node.
*/
strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
dev->node.major = dev->node.minor = 0;
- link->dev = &dev->node;
-
- link->state &= ~DEV_CONFIG_PENDING;
- return;
-
+ link->dev_node = &dev->node;
+
+ return 0;
+
cs_failed:
- cs_error(link->handle, last_fn, last_ret);
+ cs_error(link, last_fn, last_ret);
atmel_release(link);
+ return -ENODEV;
}
/*======================================================================
======================================================================*/
-static void atmel_release(dev_link_t *link)
+static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
stop_atmel_card(dev);
((local_info_t*)link->priv)->eth_dev = NULL;
- pcmcia_disable_device(link->handle);
+ pcmcia_disable_device(link);
}
-static int atmel_suspend(struct pcmcia_device *dev)
+static int atmel_suspend(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(dev);
local_info_t *local = link->priv;
- link->state |= DEV_SUSPEND;
- if (link->state & DEV_CONFIG) {
- netif_device_detach(local->eth_dev);
- pcmcia_release_configuration(link->handle);
- }
+ netif_device_detach(local->eth_dev);
return 0;
}
-static int atmel_resume(struct pcmcia_device *dev)
+static int atmel_resume(struct pcmcia_device *link)
{
- dev_link_t *link = dev_to_instance(dev);
local_info_t *local = link->priv;
- link->state &= ~DEV_SUSPEND;
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle, &link->conf);
- atmel_open(local->eth_dev);
- netif_device_attach(local->eth_dev);
- }
+ atmel_open(local->eth_dev);
+ netif_device_attach(local->eth_dev);
return 0;
}
.drv = {
.name = "atmel_cs",
},
- .probe = atmel_attach,
+ .probe = atmel_probe,
.remove = atmel_detach,
.id_table = atmel_ids,
.suspend = atmel_suspend,